Speed Tuned Motorsports

07/14/2026

Is your suspension holding your build back?

Factory suspension components are designed for comfort—but as they wear, handling, stability, and driver confidence start to fade. Upgrading to Whiteline Performance suspension components is one of the best ways to sharpen your vehicle’s handling, improve cornering, and get more out of every drive.

From premium polyurethane bushings and sway bars to control arms, mounts, and alignment components, Whiteline is engineered to reduce unwanted suspension movement while delivering the precision and control enthusiasts demand on the street and at the track.

Whether you’re refreshing an aging suspension or building a dedicated performance car, the right upgrades can make a bigger difference than you think.

Explore the complete Whiteline Performance lineup today at SpeedTunedMotorsports.com and experience the difference quality suspension components can make.

🏁 Upgrade your suspension. Feel the difference.

https://speedtunedmotorsports.com/blogs/stm-blogs/stock-vs-whiteline-performance-sway-bars-end-links-whats-actually-different

07/13/2026

The wait is over! We are turning up the heat and bringing drifting back at Langley Speedway on Saturday, August 15th.

Driver registration and spectator tickets for
Summertime Slide 🌊 are now available, check the link in our bio to get yours now!

Come party with us from 3-9PM and enjoy an evening full of adrenaline, door to door tandems and good times ! 🤙🏽

Food and vendors will be onsite and the pits are open to everyone to meet the drivers and check out the cars up close.

📸 Media applications are open. Deadline: August, 8th. Please contact us to confirm your application was received.

‼️ Kids, 6 years and younger, are FREE ‼️

See you at the racetrack! 🏁

07/12/2026

New batch of stickers in stock, these are 3.5 inch, get your while last!

#757

07/10/2026

Keep your engine running cooler when it matters most.

The SPAL Brushless Electric Fan Series is built for enthusiasts who demand maximum cooling performance with minimal power draw. Featuring advanced brushless motor technology, these fans deliver exceptional airflow, longer service life, quieter operation, and increased efficiency for everything from daily drivers to dedicated race cars.

✔ Advanced brushless motor technology
✔ Available in 10”, 12”, 14”, and 16” diameters
✔ High airflow with lower amperage draw
✔ Quiet, efficient operation
✔ Weather-resistant construction for demanding environments
✔ Ideal for street, track, drift, drag racing, and off-road builds

When reliable cooling is the difference between finishing the race and overheating, trust SPAL Automotive.

Available now at Speed Tuned Motorsports.

07/09/2026

https://speedtunedmotorsports.com/blogs/stm-blogs/haltech-nexus-rebel-jz-the-easiest-way-to-wire-a-jz-swap
A small blog post I did about this one of a kind ECU.

The Haltech Nexus Rebel JZ is back-ordered everywhere — we have it in stock, ready to ship. Full breakdown: what's included, engine support, and limitations.

07/09/2026

🚨 IN STOCK. NOT BACK-ORDERED. Only 4 left.🚨

Haltech’s brand new NEXUS Rebel JZ is on back-order at most retailers right now — but we’ve got units on the shelf, ready to ship TODAY.
If you’re running a 1JZ or 2JZ swap, this is the kit that kills the two worst parts of the job: wiring and sensor shopping. Purpose-built for the JZ platform, terminated harness in the box, full sensor pack included. Bolt it in, run the NSP Set-up Wizard, and get to first startup faster than any standalone setup we’ve seen for this engine.
What’s in the box:
✅ Nexus Rebel JZ ECU
✅ Fully terminated JZ main harness
✅ R35 coil-on-plug ignition harness
✅ R154 trans + cable throttle sub-harness
✅ Bosch LSU 4.9 wideband + weld fitting
✅ Knock sensors, air temp, fuel/oil pressure sensor
✅ 3x alternator harnesses (Denso, Bosch, Tundra)

Supports 1JZ-GTE, 1JZ-GE VVT-i, 2JZ-GTE, 2JZ-GE VVT-i and more — manual trans builds. Full breakdown on the blog, including the compatibility notes you NEED to read before ordering.
https://speedtunedmotorsports.com/blogs/stm-blogs/haltech-nexus-rebel-jz-the-easiest-way-to-wire-a-jz-swap

Once these 4 are gone, you’re back on the waitlist.🏁

07/09/2026

Not all truck wheels are created equal.

The BBS TS Series brings decades of motorsports engineering to today's trucks and SUVs, delivering the perfect balance of lightweight performance, strength, and premium styling. Whether you're building a street truck, an off-road rig, or a performance SUV, the TS Series is designed to perform as good as it looks.

✔ Lightweight construction inspired by BBS racing heritage
✔ Available in TS-C, TS-P, TS-M & TS-R designs
✔ Aggressive concave styling for modern trucks & SUVs
✔ Premium finishes built to resist corrosion and wear
✔ Precision-engineered fitments for today's most popular applications

Upgrade your truck with wheels that combine legendary BBS quality, improved handling, and unmistakable style.

Available now at Speed Tuned Motorsports.

07/09/2026

Great opportunity, get exposure and get to talk to an amazing company!

Please note: we will be stealing your pictures, posting them, and making up outlandish stories about your life and what led you to becoming an automotive enthusiast.

Lets GOOOOOOOOOOOOOO

07/08/2026

Dial in your suspension the right way.

The SPL Parts Adjustable Front Tie Rod Ends are engineered to correct bump steer caused by lowered ride height, modified caster, or suspension geometry changes. Designed for the BMW E9X, E8X, and F8X platforms, these precision components improve steering response, prevent tie rod binding, and help keep your suspension performing at its best—whether you're carving corners or chasing lap times.

✔ Corrects bump steer on lowered vehicles
✔ Prevents tie rod binding under extreme suspension travel
✔ Improves steering precision and front-end response
✔ Ideal for street, autocross, and track applications
✔ Precision engineered, assembled, and proudly made in the USA 🇺🇸
✔ Sold as a complete pair

When every turn counts, trust suspension components built for performance.

Available now at: https://speedtunedmotorsports.com/products/spl-parts-06-13-bmw-3-series-1-series-e9x-e8x-tie-rod-ends-bumpsteer-adjustable?_pos=1&_psq=sppSPL+TRE+E9X&_ss=e&_v=1.0

-
-
-
-