High Side Fabrication

High Side Fabrication Racecar Fabrication And general repairs and fabrication to a wide variety of almost anything.

Recently finished up this custom roof truss attachment for a telehandler or bobcat. Designed to make setting trusses saf...
09/14/2026

Recently finished up this custom roof truss attachment for a telehandler or bobcat. Designed to make setting trusses safer, faster, and more efficient.

Haven't posted much lately because I keep forgetting to post. đź«  We've finished up a few projects over the past few week...
07/13/2026

Haven't posted much lately because I keep forgetting to post. đź«  We've finished up a few projects over the past few weeks, and here they are!

First, we replaced the front bars and mounted an aftermarket radiator in a Crown Vic. Then we built a Hobby Stock bumper. To finish it off, we fully assembled and welded in a Crown Vic cage, along with installing the necessary new safety bars.

Finished two stock car bumpers. One front and one rear. Also repaired two hobby stock bumpers one front and one rear.
06/08/2026

Finished two stock car bumpers. One front and one rear. Also repaired two hobby stock bumpers one front and one rear.

2 more hobby stock bumpers ready for battle.
05/18/2026

2 more hobby stock bumpers ready for battle.

Customer request newly designed bumper ready to hit the track.
05/11/2026

Customer request newly designed bumper ready to hit the track.

3 Crown Vics in 3 days. We started by adding the necessary new bars according to the rules and decided to add some of ou...
05/08/2026

3 Crown Vics in 3 days. We started by adding the necessary new bars according to the rules and decided to add some of our own safety features as well. We added 2 bars to the door bars, gussets, and a door plate per the new rules. Then we went ahead and added a bar connecting the two front main cage posts together, along with a gusset tying it all together. Also fixed and added a few other bars we suggested to help ensure safety.

We added a few bars to one car where the B-pillar was, along with another bar behind the driver connecting the X together. On our last car, we reinforced the front bumper by adding two hoops.

Another trailer in the books, can you tell we like building these? Just finished this 6’4” x 12’ utility trailer, built ...
05/06/2026

Another trailer in the books, can you tell we like building these? Just finished this 6’4” x 12’ utility trailer, built tough and ready to work. Constructed out of 2 1/2” x 2 1/2” x 3/16” angle iron frame, Expanded metal floor, Fully adjustable ramps, Full LED lighting, 2” ball hitch, 3,500 lb axle, 15” rims, Cleaned up with a sharp white finish Solid, reliable, and built to last.

Forsale $2,400 message me if interested!

Hobby stock body complete and ready for installation.
04/21/2026

Hobby stock body complete and ready for installation.

Forgot to post these 🫢 but finally finished up and nearly complete rebuild on this car after it took a wild ride in the...
04/21/2026

Forgot to post these 🫢 but finally finished up and nearly complete rebuild on this car after it took a wild ride in the middle of last season. Started by fixing the passenger-side door bars, then completely rebuilt the body fenders, doors, and quarters. First time building opera windows and mounting a fiberglass roof. Also redid the entire front and rear suspension with all new parts, including a new rear end. Definitely a big project, but was able to get it done just in time for the start of the season. In the future our goal is to build a 2 peice quarter panel but being a first time decided to do a 3 piece.

We haven’t posted much lately, but we’ve been hard at work building bodies and updating cars. This project came together...
04/05/2026

We haven’t posted much lately, but we’ve been hard at work building bodies and updating cars. This project came together with custom lower quarters, doors, side skirts, a bumper, and our first aluminum trunk.

We then completed the full-body assembly, including the roof, quarters, doors, trunk, hood, nose, tail, rear decking and side skirts.

Waiting on parts for the other car and should have that one all ready to go for race season!

Address

3012 North State Highway 35
Norfolk, NE
68701

Website

Alerts

Be the first to know and let us send you an email when High Side Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to High Side Fabrication:

Shortcuts

Share

Category