07/25/2021
One 5.4l 3v down and one more to go, the down side is this one was taken from a expedition and put into a f150 with out the installation of new parts. In my opinion a very poor install. Will be doing a overhaul on this engine since the cylinder heads and cams are scored, vehicle has no oil pressure when warm, and once again chain tensioner gaskets blew out. Hope that the block is reusable out if so, i will be installing used low mileage cyl. Heads and cams, new followers and valves, definitely will be upgrades the oil pump to a high volume most likely melling. All new timing components and will be using the metal ratcheting style tensioners (only way to go). Bringing some life back into this engine.. might even swap in a few performance ad on while I'm there.