JS Fab and Performance

JS Fab and Performance Authorized dealer for Nitrous Outlet, Mantic Clutch USA, and East Coast Superchargers

Chucks 1973 Challenger, Gen3 6.4 Hemi, with a TR6060. Vintage Air, Dakota digital gauges, Ididit Steering column, tubula...
11/17/2025

Chucks 1973 Challenger, Gen3 6.4 Hemi, with a TR6060. Vintage Air, Dakota digital gauges, Ididit Steering column, tubular suspension with coilovers and Wilwood brakes from Gerst Suspension. Minitub and custom trans tunnel from my late friend Brison and Dakota at Willits Metalworks.

C6 Z06 I did awhile back, C&C ported cylinder heads, new clutch, rebuilt the torque tube, and a new diff.
10/30/2024

C6 Z06 I did awhile back, C&C ported cylinder heads, new clutch, rebuilt the torque tube, and a new diff.

Haven't posted in awhile, but finally got Chucks 73 Challenger with a Gen3 6.4 hemi and a 6 speed up and running.
10/30/2024

Haven't posted in awhile, but finally got Chucks 73 Challenger with a Gen3 6.4 hemi and a 6 speed up and running.

04/27/2023

Devin was able to get the valvetrain/engine issues sorted out and got the car back to Matt Bell at Redline Motorsports. On only 29psi it laid down 1803hp/1421tq!

12/19/2022

Camaro finally made it to Redline motorsports for some tuning. Valvetrain issues kept it from being able to be turned up. Still a ton of power left on the table.

A little bitter sweet as this was my dad's car that he sold before he passed away. But pretty well have it all finished ...
08/20/2022

A little bitter sweet as this was my dad's car that he sold before he passed away. But pretty well have it all finished up for the new owner. Ended up building him a new turbo kit along with a whole list of upgrades. 400ci dart LS with twin 76/75s, FTI 2 speed 400, and a Burkhart Fab 9", 10GPM fuel system for E90.

07/07/2021

Made a trip to Dyno Tune MP this morning to dyno a customer's foxbody that I installed a Holley EFI, top end kit, and a Vortech V3 SCI on. Made 515hp/461tq on 11.5psi and 93 octane

Customer brought down an old sheet metal tank for his drag bike that had seen better days. Whipped him up a new aluminum...
04/20/2021

Customer brought down an old sheet metal tank for his drag bike that had seen better days. Whipped him up a new aluminum one

10/03/2020

A little 8,000rpm pull

We are now a dealer for Fore Innovations fuel systems and components!
09/25/2020

We are now a dealer for Fore Innovations fuel systems and components!

Custom paint matched 5" intake for the 2.9 Whipple with a 150mm Throttle body
09/13/2020

Custom paint matched 5" intake for the 2.9 Whipple with a 150mm Throttle body

Address

Muscatine, IA
52761

Website

Alerts

Be the first to know and let us send you an email when JS Fab and Performance posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to JS Fab and Performance:

Shortcuts

Share

Category