Big Bear Police Vehicles, LLC

07/16/2026

Sheesh! This was 8 years ago!

06/24/2026

Here we go!

06/24/2026

06/24/2026

Come see us for all your emergency vehicle lighting and equipment needs! Right here in Mena, Arkansas!

06/04/2026

Let me give some pointers to some DIYers out there. I completely understand we are all trying to save money when and where we can.

I have worked on so many different patrol vehicles over about a 30 year span, I have seen many instances of questionable wiring practices, some were down right scary. I do not recommend twisting wire strands together and just throw some tape on them. Also, when you run through a drill hole (or access point) through the firewall of a vehicle, always use a grommet of some kind, always use electrical tape or heat shrink the wiring, along with using wire loom. Seal the access point thoroughly through the vehicle’s firewall with some silicone. This keeps water from entering the cab of the vehicle and getting under the vehicle flooring and possibly into any electrical components. Furthermore, this keeps the wiring from chafing against the sharp steel edges of said access point and causing a much bigger problem.

I’m here to help if any of y’all need anything.

Be safe out there!

06/04/2026

One of our repeat customers at a nearby college campus brought us a Ford Ta**us patrol vehicle to install a new lightbar and control panel, plus repair some wiring issues. A big THANK YOU to Chf. Brown and Sgt. Colwell for their trust and continued business!

Feniex Fusion 49” LED lightbar with takedowns, alley lights, integrated traffic arrow, etc.

05/09/2026

2020 Ford Police Interceptor Utility