Evans Tuning

Evans Tuning Professional dyno tuning for Honda/Acura, Subaru, Nissan, Ford, Toyota, Mitsubishi, Chevy, Jeep, Dodg
(397)

A long-time Evans Tuning customer recently broke some records with his stock motor S2000.  Aside from the fact that this...
12/01/2020

A long-time Evans Tuning customer recently broke some records with his stock motor S2000. Aside from the fact that this is a stock F22C engine, the more impressive thing is that it's running on the stock ecu using a Hondata Flashpro. There's no traction control, and he's using a basic 3-port boost solenoid.

Keeping it simple definitely pays off sometimes.

Congrats to Chris!

This S2000 is still on its original engine with 43k miles. A bone stock F22 bottom with only InlinePro head studs and BC valve springs & steel retainers maki...

Datsun Z with built 440 cubic inch LS7 engine, 11.5:1 comp, huge Texas speed cam, MSD intake, 3.5” cold air intake, long...
07/01/2020

Datsun Z with built 440 cubic inch LS7 engine, 11.5:1 comp, huge Texas speed cam, MSD intake, 3.5” cold air intake, long tubes/dual 3” exhausts, 50 lb injectors, custom fuel system, and much more. Tuned with HP Tuners on 93 octane produced 670 whp / 628 tq.

Drag S2000 in for a tune this past week with a 10.5:1 comp built AP2 engine, stock cams/intake manifold, custom turbo ki...
05/09/2020

Drag S2000 in for a tune this past week with a 10.5:1 comp built AP2 engine, stock cams/intake manifold, custom turbo kit using BW s369 turbo with 1.00 a/r housing, dual 450 lph pumps, upgraded lines/regulator/ID2600ccs, twin disc clutch, 370z trans, 8.8 rear, and tons more supporting mods. Tuned with AEM Series 2 on e76-78 ethanol content at 41 psi produced 1002 whp / 705 tq.

04/19/2020

🚨 CALLING ALL K-SERIES LOVERS! 🚨

Evans Performance Academy just released a HIGHLY ANTICIPATED training course!

Follow along with Jeffrey Evans as he shows you every last detail, tip, and trick in the tuning process for this Honda K-series engine using AEM Infinity.

The entire training tutorial is a 9-part, 9+ hour course showing you everything from basemap creation all the way to the very last dyno pull. Topics covered in the course are cold start, idle control, dual VE fuel tables, spark timing tuning, per cylinder knock control, fail-safe protection features, flex fuel, direct-port nitrous tuning, variable cam control tuning, VTEC tuning, acceleration enrichment, traction control, launch control, and so much more!

Check out this 10 minute teaser from the first video (full length is an hour and a half!!)!

Drag AP2 S2000 going for the stock block 1/4 mile record in for some tuning.  Stock AP2 engine with just arp head studs,...
04/07/2020

Drag AP2 S2000 going for the stock block 1/4 mile record in for some tuning. Stock AP2 engine with just arp head studs, custom turbo kit using 6466 turbo, ID 2600 cc injectors, dual 450 LPH pumps, 3” turbo back exhaust, 350z trans, 8.8 rear, twin disc clutch, and tons more supporting mods. Tuned with Hondata Flashpro on race blended e85 at 33-34 psi produced 950 whp / 687 tq. Pretty impressive for a stock Honda engine!

Track FD RX7 in for tuning this past week with a street port 13b, full race manifold, GT35r, twin gates, custom IC / pip...
01/25/2020

Track FD RX7 in for tuning this past week with a street port 13b, full race manifold, GT35r, twin gates, custom IC / piping, ID1050x primary injectors, ID 2200cc secondary injectors, upgraded fuel system, IG1 coils, and many more mods. Tuned with Haltech Elite on 93 octane at 20 psi produced 430 whp / 340tq. Fuel pressure comp, gear/rpm/trim pot based boost control, knock control, closed loop lambda feedback, over heating protection (oil and coolant based), and oil pressure fail safe were configured.

Track Evo 8 MR with mild cams, equal length manifold, FP Green turbo, 3” turbo back exhaust, ETS intercooler/piping, FIC...
12/18/2019

Track Evo 8 MR with mild cams, equal length manifold, FP Green turbo, 3” turbo back exhaust, ETS intercooler/piping, FIC 1000cc, drop in fuel pump, Omni 4 bar map sensor, and 3 port EBCS. Tuned on 93 octane at 26 psi with Tephra v7 rom produced 440 whp / 352 tq.

Drift s13 with built KA24de using BC 264 cams, forged pistons/rods, custom turbo kit using GT35r, 3” turbo back exhaust,...
12/04/2019

Drift s13 with built KA24de using BC 264 cams, forged pistons/rods, custom turbo kit using GT35r, 3” turbo back exhaust, 850cc injectors, upgraded fuel pump, k20 coil conversion, and more supporting mods. Tuned with Haltech Elite 750 on 93 octane at 20 psi produced 430 whp / 400 tq.

Evans Performance Academy is running their Black Friday Sale now through midnight on Friday.  Monthly subscriptions and ...
11/27/2019

Evans Performance Academy is running their Black Friday Sale now through midnight on Friday. Monthly subscriptions and course purchases are all 10% off.

New monthly subscribers can get 10% off per month for the first year of their subscription using the code: THANKS

Students looking to make a one-time purchase for a specific course or the lifetime membership can save 10% off the purchase price by entering the code SAVE10 at checkout!

SUBSCRIBE (PROMO CODE: THANKS): https://evansperformanceacademy.vhx.tv/checkout/subscribe/purchase

PURCHASE (PROMO CODE: SAVE10): https://evansperformanceacademy.vhx.tv/products

**Please note that the subscription promo code only applies to NEW subscription accounts. It can not be applied to current subscriptions.

1950s steel body Ford pick up with a 6 spd Coyote engine swap in today for a quick tune.  Swap was fitted with JLT intak...
11/12/2019

1950s steel body Ford pick up with a 6 spd Coyote engine swap in today for a quick tune. Swap was fitted with JLT intake, Ford Racing TB, Cobra Jet Intake manifold, BBK headers, custom 3” dual exhaust. Tuned with HP Tuners on 94 octane produced 460 whp / 389 tq.

Drag AP2 s2000 with custom turbo kit, 6062 turbo, 3” exhaust, ID2000cc, dual 340 LPH pumps, 3 port EBCS, flex fuel senso...
11/06/2019

Drag AP2 s2000 with custom turbo kit, 6062 turbo, 3” exhaust, ID2000cc, dual 340 LPH pumps, 3 port EBCS, flex fuel sensor, and many more supporting mods. Tuned with AEM series 2 using flex fuel feature on e80 at 27-27 psi produced 703 whp / 486 tq. Per cylinder knock control, lean protection, over heating protection, fuel pressure and oil pressure protection were dialed in to keep the engine safe.

Drag EG civic with built k20/k24 all motor.  Built using DC ported head, DC 3.2 cams, 12.5:1 comp pistons / lightweight ...
11/04/2019

Drag EG civic with built k20/k24 all motor. Built using DC ported head, DC 3.2 cams, 12.5:1 comp pistons / lightweight rods, 4 piston ported skunk2 manifold, 90mm TB, 3.5” cold air intake, race header, 3” exhaust, ID 1000cc, drop in fuel pump, and flex fuel sensor. Tuned with Hondata Kpro on 93 octane produced 306 whp / 202 tq, on flex fuel at e60 produced 311 whp / 203 tq.

Address

9 Campbell Road
Mount Bethel, PA
18343

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+18669758863

Alerts

Be the first to know and let us send you an email when Evans Tuning posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share