Genisis Fabrication and Raceworks.

Genisis Fabrication and Raceworks. Specific to Gen 3 LS.

Gen 4 DOD disable, 93 tunes, Economy tunes, carb tuning, weld and metal fab, audio, tint, wheel polish/wheel repair, General oem maintenance.

07/15/2026

Jason Davis and I got the 4L75 in. Got the tune dialed in.. exhaust is coming next.

Started under the hood on John Ogden truck. Ready to make some real progress on this one. Keeping the flow throughout th...
07/15/2026

Started under the hood on John Ogden truck. Ready to make some real progress on this one. Keeping the flow throughout the truck. Subtlety wins.
With Jason Davis

Welded a b**g in Jason Davis trans pan. For the new transmission going in a bad bitch. Got John Ogden hood ready for pri...
07/11/2026

Welded a b**g in Jason Davis trans pan. For the new transmission going in a bad bitch.
Got John Ogden hood ready for prime and body work.

Getting the bed wrapped up. We also made a slot so it can be opened from the middle. Cool little touch once painted will...
06/20/2026

Getting the bed wrapped up. We also made a slot so it can be opened from the middle. Cool little touch once painted will blend into to the bed but also be a functional piece. Wanted to leave the inner metal on the door kind of a blank canvas so whatever paint scheme happens can be incorporated as mild or wild as the customer wants.

Jason Davis getting the inner fender tied in.. we wanted the solid look that will match our valence, but also unbolt so ...
06/20/2026

Jason Davis getting the inner fender tied in.. we wanted the solid look that will match our valence, but also unbolt so John Ogden can actually get the bumper off if ever needed. Trying to make things unbolt but look solid can be a mf. Once painted it will be good. Little tweaking and we will have this complete.

We got the hood ready for body work and prime. One thing about me is I like flow. The contours of every piece of this tr...
06/20/2026

We got the hood ready for body work and prime. One thing about me is I like flow. The contours of every piece of this truck matches. Including the hood.

Jason Davis and I Getting John Ogden s10 shocks mounted and getting the cowl hood worked in..Ive always thought the squa...
06/13/2026

Jason Davis and I Getting John Ogden s10 shocks mounted and getting the cowl hood worked in..
Ive always thought the squared off cowl hoods didnt look as good as the radius corners. So we just make them. I also cut in the front to match the existing as close as possible. Keeping the stock center body line also. Next is to cut it in and metal finish underneath and fill some of the stock voids in.
Then engine bay metal to compliment the engine.
Funny how you can take an ugly ass template and make it into something that looks better..

06/12/2026

We have had alot of calls and people to stop by to ask about chroming. We do not chrome. We dont do any chemically dipped processes. If you are getting something chromed make damn sure you take it to a shop thats going to have the real deal. None of that white shiny looking s**t that looks like plastic door handles.

Jason Davis and I been playing with templates for the s10 and also Got this rear bracket built for the wheelie bar. Bett...
06/10/2026

Jason Davis and I been playing with templates for the s10 and also Got this rear bracket built for the wheelie bar. Better than what was there. We corrected and offset the rear bar to align the wheelie bar back up to the centerline if the engine since its parallel with the front end. Ready to see this thing launch. Gonna be nasty!!!!!!

Jason Davis and I Going to be getting a few things fixed on the chassis. Making it better. And getting brackets set up f...
06/07/2026

Jason Davis and I Going to be getting a few things fixed on the chassis. Making it better. And getting brackets set up for the wheelie bar. More to come.....

Address

3617 Eden Street Pascagoula Ms 39581
Moss Point, MS
39567

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+12282810916

Website

Alerts

Be the first to know and let us send you an email when Genisis Fabrication and Raceworks. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category