Hill Country Forced Induction

Hill Country Forced Induction Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Hill Country Forced Induction, Automotive Parts Store, 2600 s Janice Street, Las Cruces, NM.

Here at Hill Country Forced Induction we specialize in building/rebuilding turbochargers, billet compressor wheels, porting and powder coating/ ceramic coating.

08/07/2026

One of our HCFI custom VF48 G25 turbos with a T51r mod Michael Irby

Boost Controlled Performance BCP x500 to x500r conversion This turbo was sent in for a rebuild along with conversion to ...
05/14/2026

Boost Controlled Performance BCP x500 to x500r conversion

This turbo was sent in for a rebuild along with conversion to the larger x500r setup.

It received the following

-2 port billet thrust bearing
-staggered front and rear oil seals
-larger 9 blade point milled billet compressor wheel
-larger custom D5 5+5 blade turbine wheel
-wrinkle red powder coat finish on the compressor housing
-black ceramic coating on the turbine housing

This turbo will make more overall power than the previous x500 setup it was converted from and spool up quicker than the stock x500r setup.

If you are interested in having your turbo converted to something like this, send us a message and we will get you setup. We also have the D5 turbine wheels available for the x500 units.

We are super busy right now with current builds and are experiencing longer than usual build times. As per always, we do not guarantee build times and rarely have anything on the shelf ready to ship. Thank you for your continued support and patience- Adrian

IHI VF52 This turbo was rebuilt to stock specs with upgraded internalsIt received the following -billet thrust bearing -...
05/13/2026

IHI VF52

This turbo was rebuilt to stock specs with upgraded internals

It received the following
-billet thrust bearing
-staggered oil seals
-chartuese powder coat finish on the compressor housing
-black ceramic coating on the turbine housing
-resurfaced flanges

We have plenty of options available for the VF52 setups including the G25-550 billet compressor wheel, D5 turbine wheel, ball bearing conversion and stock size inlet T51r mod.

If you are interested in one of these, they can be found here.

https://hillcountryforcedinductions.com/rhf55-ihi-vf52/

All of our turbochargers are built to order. We rarely have anything on the shelf ready to ship. We are super busy during this time of year. Please keep that in mind when placing your order and as always, thank you for your patience- Adrian

Custom HCFI Subaru VF series turbo with all the upgrades. This turbo is one of our HCFI VF series lineup with a number o...
05/12/2026

Custom HCFI Subaru VF series turbo with all the upgrades.

This turbo is one of our HCFI VF series lineup with a number of added options.

Most notable is the stock size inlet T51r mod! You will not find any other VF series turbos on the market with this as an available option other than from us at HCFI.

This turbo also received a dual ball bearing conversion, G25-550 9 blade billet compressor wheel and a G25 profiled D5 5+5 blade turbine wheel.

This turbo is capable of over 400whp with supporting mods and fuel while keeping spool up close to stock.

As always, this turbo also received powder coat finish on the compressor housing in wrinkle black and a black ceramic coating on the turbine housing.

An absolutely killer setup right here!

If you are interested in one of these, they can be found here.

https://hillcountryforcedinductions.com/subaru/

As a reminder, all of our turbos are built to order. We are super busy this time of year and will be moving as quickly as we can. Thank you for the patience as always 🙏-Adrian

Hello everyone, this is an update post for currently placed orders. As most of you are aware, this time of year is extr...
04/27/2026

Hello everyone, this is an update post for currently placed orders.

As most of you are aware, this time of year is extremely busy for us. We're working as quickly as we can do get everyone's orders out the door but lead times can and do run longer than normal.

As stated on our website, individual listings and in our terms/conditions, we do not guarantee a delivery or build date. Once your turbo is done you will either be notified personally or will receive an update via our website.

I thank all of you for the continued support and patience as we work through everyone's builds.

-Adrian

Address

2600 S Janice Street
Las Cruces, NM
79756

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Website

Alerts

Be the first to know and let us send you an email when Hill Country Forced Induction posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Hill Country Forced Induction:

Shortcuts

Share

Category