http://stores.ebay.com/Ducati-Depot

Ducati Depot, 908 Janmar Court, Minneola, FL (2026)

03/20/2026

Parting out - 2012 Ducati Diavel Carbon seen in the photos. All of the carbon fiber parts are Ducati OEM. Detailed photos of individual parts are available on request.

Prices shown do NOT include shipping. International shipping is available.

The list below does not show all available parts, email to [email protected] or text to 407-697-0211 with questions or purchase requests.

- Engine (16k miles) - $2000

- Lockset w/ Dash, Fuel Level Gauge, ECU, BBS module, gas cap, ignition, key fob, seat lock, antenna (complete set) - $1200

- Competition Werkes Aluminum Slip-on Muffler (very good condition) - $400

- Carbon Fiber Gas Tank Cover (decent condition, scratches/scuffs, faded clear, missing decals) - $350

- Carbon Fiber Gas Tank Side Panels L & R (very good condition) - $200

- Carbon Fiber Belly Pan Panels L & R (as-new condition) - $325

- Carbon Fiber Front Fender (scratches, faded clear, missing decal) - $150

- Carbon Fiber Seat Cowl (faded clear, light scratches, missing badge) - $150

- Brushed Aluminum Air Intake Scoops L & R (scratched, one missing badge) - $200

- Brembo MonoBloc Front Brake Calipers - $350

- Brembo Radial Front Brake Master Cylinder w/ Billet Lever & Reservoir - $175

- Brembo Radial Clutch Master Cylinder w/ Billet Lever & Reservoir - $175

- Front & Rear Wheel Set (no tires) - $800

- Front & Rear Brake Rotors - $350

02/03/2026

Good afternoon Friends. We've become aware that someone has copied our business information and has created a new page named "Ducati Depot Back Up". WE DID NOT AUTHORIZE THIS PAGE, WE HAVE NO CONNECTION WITH THE PEOPLE WHO PUT THIS PAGE UP, THEY ARE SCAMMERS!

We have reported this to Facebook and are hopeful they'll take down the page, we'll see how that goes. Meanwhile, just be aware that they are not us and we do not believe they even have any of the parts they are selling, it looks like they are simply copying other peoples Facebook postings.

06/15/2025

Parting out the Ducati 1098S Superbike shown in the photos. The bike is already disassembled, pictures and prices for all of the parts can be seen here:

https://www.ebay.com/sch/i.html?_dkr=1&iconV2Request=true&_blrs=recall_filtering&_ssn=ducati_depot&store_cat=0&store_name=ducatidepot&_oac=1&_nkw=1098

We can do better on pricing if we don't have to do the transaction through ebay, so feel free to reach out and let us know what parts you're interested in. Text to 407-697-0211 or email to [email protected] will get you the quickest response.

11/25/2024

JUST IN TIME FOR CHRISTMAS!!

IMA Special Parts, Italian manufacturer of high-end billet aluminum triple clamps for Ducati, BMW and many other models, has just released a brand new item - these bad-a** sunglasses!!

Some text from IMA:

"These sunglasses are designed by riders, for riders. Crafted in Ergal & Titanium and joined together with Artisanal riveting, these glasses represent a new concept in motorcycling eyewear.

Robust and light, yet flexible enough to ensure a perfect helmet fit and absolute comfort while riding. The unique design combines high fashion with sporting values and traditional mechanics.

High-tech ZEISS lenses with an inner anti-reflective coating confer category 3 eye protection (blocks 82-92% of UV light)."

This is truly a unique pair of glasses and a definite MUST HAVE for the serious motorcycle enthusiast (and all Ducatista)!!

Price is $399.99 per pair, shipping is free in the U.S. Call, text or message us for more info or to purchase. International shipping is available. They are also available for purchase in our ebay store: https://www.ebay.com/itm/196845493527

Ducati Depot is an authorized IMA dealer.

02/10/2024

SOLD - 2008 Ducati Hypermotard 1100 w/ 12,728 miles on the clock. Clean titled in FL, in good running condition. Aftermarket parts include: Termignoni/Ducati Performance Carbon Fiber Exhaust; Ducati Performance ECU; Puig Tinted 'Tall' Windscreen; Carbon Fiber Rear Fender; Integrated LED tail light; Evotech Performance Aluminum License Plate/Tag Relocator Bracket; Red Subframe to match the frame; and Bazazz ZFi controller (included but not installed). The fuel pump was just completely rebuilt (new pump, regulator & filter) and oil was just changed. Includes both keys & key code card.

Asking $6500 obo - cash or Zelle preferred, paypal is acceptable if sent as "gift to family & friends".

Call/text to 407-697-0211 is preferred. You can message also but we've been having a problem with messenger (we get the messages but are unable to reply). Email works too - [email protected]

12/17/2023

FOR SALE - New Evotech Billet Clutch & Stator/Alternator Engine Cover Guards for the Ducati Panigale 1199/1299 models (pretty sure the stator cover guard also fits the Pani 899/959 models). $300 for the pair (or $185 for the clutch cover, $150 for the stator cover if purchased separately). Each comes with it's own plastic carry case as shown. Shipping in the US is included. Message or text to 407-697-0211 to purchase.

12/10/2023

SOLD SOLD Microtec M197 ECU for sale. Works with all Ducati models that use a Magnetti Marelli 5AM / 5.9M ECU. This ecu is the Holy Grail of ecu's for those Ducati models that use the Magnetti ecu. You likely already know exactly what this ecu is capable of so I won't bore you with the details (specs available online), but I will note for the uninformed that this is the ecu you MUST use if you want to replace your oem dash with an aftermarket dash.

This ecu is a new open box item, only tested to confirm functionality, so there is a test map loaded. Maps for all supported Ducati models and the rest of the cd-rom that comes with the ecu are loaded on a new 16gb USB flash drive that is included. Note that the interface cable that's included is a used cable (in good condition).

$750 shipped in the US. International shipping is available. Message or text me at 407-697-0211 if interested.

10/14/2023

SOLD SOLD ----- STAND-A-PALOOZA!! Rear Stands for sale. Most are Pit Bull brand for the Ducati Panigale 1199/1299/V2 (and most other Large Axle Ducati models such as the 1098/1198, Streetfighter 1098, Monster 1200, MTS1200 and Diavel). There are a few for other makes/models in there as well.

Asking prices are below. The list below is ordered from left to right based on the first pic (showing all the stands together).

Local pickup is definitely preferred, but I will ship if necessary. Shipping will be at at cost to your location. Keep in mind if you need shipping it won't be cheap due to the size of the stands.

Since CCS ROC is next weekend at Daytona and I'm just outside of Orlando, I can drive over to the track around noon on Friday, Oct. 20 IF AND ONLY IF 4 or MORE of the stands need to be delivered AT THE SAME TIME. Otherwise, local pickup or paying for shipping are your only options.

Payment forms accepted - Paypal (must be sent as a gift to family & friends), Zelle or cash at time of pickup. Message me or text me at 407-697-0211 if you want to buy one or more.

1. Pit Bull for Ducati Panigale, w/ Removable Arm, like new condition - $150

2. Pit Bull for Ducati Panigale, w/ Removable Arm, very good condition - $120

3. Pit Bull for Ducati Panigale, w/ Removable Arm, very good condition - $120

4. Pit Bull for Ducati Panigale, w/ Straight Arm, very good condition - $90

5. Pit Bull for Ducati Panigale, w/ Straight Arm, very good condition - $90

6. Pit Bull for Ducati Panigale, w/ Straight Arm, very good condition - $90

7. Pit Bull for Ducati Panigale, w/ Straight Arm, very good condition - $90

8. Ducati Performance/FG Rear Stand for Ducati Panigale, very good condition - $150

9. Ducati Performance/FG Rear Stand for Ducati Panigale, good condition - $125

10. R&G Rear Stand for Ducati Panigale, good condition - $70

11. T-Rex Rear Stand for Ducati Panigale, good condition - $70

12. Pit Bull Rear Stand for Triumph models w/ single-sided swingarm, good condition, 2 pins - $80

13. Red Front Stand, good condition - SOLD

14. Pit Bull Rear Stand for Ducati models w/ single-sided swingarm (small axle), good condition - $75

15. Pit Bull Rear Stand for Dual-sided swingarm models (all brands), w/ Thumb Release nuts, good condition - $85

16. Pit Bull Rear Stand for Dual-sided swingarm models (all brands), good condition - $85

17. Ducati Performance Rear Stand for Ducati Scrambler models, very good condition - $75

07/08/2022

Parting out the 2002 Ducati Monster 620 seen in the photos. Not all of the parts are listed below, if you don't see the part you're looking for feel free to shoot us a message.

Please PM us, email us at [email protected] or call/text to 407-697-0211 if you would like to make a purchase or have questions. International shipping is available.

ENGINE COMPONENTS

- Engine - Monster 620, good running condition, 17,182 miles - $750
- Leo Vince Aluminum Mufflers painted black - fits all SS models 1999 and later - $250
- Exhaust Headers - oem - $50
- Oil Cooler w/ Lines - fits all SS models '99 & later - $115
- Clutch Slave w/ Line - oem - $50
- Throttle Bodies – bare - $35

BRAKES & WHEELS

- Brembo 3-Spoke Front Wheel w/ tire - oem paint, 3.5"x17", uses a 25mm axle - $150
- Brembo 3-Spoke Rear Wheel w/ tire - oem paint, 4.5"x17", uses a 17mm axle, includes Brembo rear brake rotor & Sprocket Carrier w/ Sprocket - $100
- Brembo Front Brake Caliper - w/ Pads, 65mm bolt spacing, w/ Brake line- $65
- Brembo Front Brake Rotor - $65
- Brembo Clutch Master Cylinder w/ reservoir & lever (no switch) - $65
- Brembo Rear Brake Master Cylinder w/ Reservoir - $35
- Brembo Rear Brake Caliper w/ Pads - $65
- Rear Brake Lever w/ Plunger - $50
- Front Axle w/ Nut - $50

FRAME & SUSPENSION

- Showa Forks (65mm caliper mounts, 50mm upper/54mm lower) - $150
- Showa Rear Shock - $70
- Frame - 2002 Monster 750 w/ clean/clear FL title - $200
- Triple Clamps w/ bearings & Bar Risers - upper & lower - $125
- Renthal Handlebars - $65
- Left Footpeg Brackets w/ Pegs Black - $125
- Right Footpeg Brackets w/ Pegs Black - $125
- Gear Shift Lever w/ Linkage - Fits all Monsters & numerous SBK/Monster/ST models - $85
- Kickstand w/ Mount Bracket & Spring - oem - $65
- Swingarm w/ pivot bolt (otherwise bare, no axle or adjusters) - steel - $35
- Rear Axle w/ Adjusters - $40

BODYWORK

- Gas Tank – Blue & Orange paint. Leaking from the left side bottom as shown, otherwise in good physical condition
- Gas Tank – Yellow oem paint. Good condition, no leaks. Small Dent above the “D” decal on the left side, some minor scratches on the paint from normal usage. Minor oxidation inside the tank as shown
- Aluminum Headlight Mount Bracket w/ LED Turn Signals - $75
- Gas Tank Buckle/Latch - $50
- Vortex Quick Release Gas Cap - $25
- Front Fender - $50
- Front Fender Mount Clips Set of 4 - $45
- CRG-Style Bar End Mirror - $20
- OEM Seat - good condition - $75
- Fairing Tail/Seat Side Panels L & R - $50
- “Beer Tray” Rear Fender w/ LED Turn Signals - $50

ELECTRICAL COMPONENTS

- ECU, Dash, Ignition, Seat Lock & 1 Key - $450
- Throttle Housing Assembly w/ Cable - $60
- Fuel Injector - $50 each
- Fuel Level Sensor - $125
- Headlight Assembly - oem - $100
- Fuel Pump Assembly - $125
- Voltage Regulator - $40
- Right Hand Controls Switch - $35
- Left Hand Controls Switch - $70
- Starter Solenoid - $30
- Wiring Harness - Complete - $100
- Timing Pickup Sensor / Crank Position Sensor - $85
- Starter Motor - $85
- Ignition Coils w/ Plug Wires - includes both - $40

06/12/2022

SOLD - Ducati 996 Chassis / 1123cc 2V Hybrid Superbike Race Bike

Circumstances force the sale of my beloved Ducati 996-chassised 1123cc 2V Hybrid LW Race Bike, aka "The Beast".

This bike is absolutely amazing, having won multiple National & Regional Championships in CCS. If you've ever raced against this bike you know exactly what it's capable of, even with me as the pilot! And if you haven't, you can always ask someone who's actually raced it besides myself (Greg Melka and Charlie Long). Greg Melka turned 1:55's and 1:56's at Daytona on this bike, which is a middleweight time, not a lightweight time. This bike also finished 3rd overall at the VIR round of the CCS TC with Greg & Charlie onboard, only losing out to two 1000CC Superbikes, but ahead of all of the 600's in the field. It's a fast bike and yes, they're definitely fast riders!!

This bike is legal for all CCS Lightweight classes except for LW Supersport. Also legal in some AHRMA classes, and I suspect a couple of WERA classes as well. The bike weighs approx. 345lbs ready to race a 6-8 lap sprint race (with approx. 1.5 gal of fuel in the tank) and puts out right about 120hp with 85 ft/lbs of torque.

You can see a brief write-up of the bike online by clicking here: https://lwtracer.com/.../behind-the-beast-ducati-depots.../

This bike has been meticulously maintained over the years by Seb at Melillimoto, the extensive service history is available to the buyer upon request. No expense was ever spared in the building or maintenance of this bike – oil changes (Motul 300 full synthetic) every 3rd race weekend, valve adjust/new belts at least once if not twice a year. New belts, valve adjustment & oil change were just done again literally this week. All the bike needs right now is a rider.

The bike comes with a number of extra parts including: front and rear stands, spare Woodcraft footpegs (4) & Woodcraft handlebars (4), a full set of rear sprocket gearing (36T-42T rear QC sprockets, 15T/16T fronts), a complete set of extra fiberglass fairings, another extra set of fiberglass side fairings, a set of tire warmers (I just need to confirm they’re still working), and likely some other spares once I go through the toolbox and the trailer and see what's there that can be included.

The hard parts on the bike are listed below, although I have no doubt I'm missing some of the details:

ENGINE

- Hypermotard 1100 Cylinder Heads, bored, ported and polished w/ oversized valves by our "secret weapon guy" in Canada
- Ducati Performance Camshafts
- Pistal Hi-Comp Pistons (2mm over-bore)
- Hypermotard 1100 Crankshaft & Con-Rods
- 749R Close-Ratio Transmission - all the gears were polished, back-cut and coated by R&D Racing Transmissions
- Lightweight Billet Flywheel
- 1098 Engine Cases
- Crank/Con-rods/Pistons/Flywheel professionally balanced by Ben Fox at Fox Performance
– Yoyodyne slipper clutch
- Bored-out (1mm over-sized) Hypermotard 1100 throttle bodies
- TPO “Beast” Velocity Stacks
- Full 2-1 Exhaust w/ Titanium Muffler. True story - the Beast originally had a Ducati Performance Carbon Fiber muffler when we started the project, but the engine literally blew the carbon muffler apart during a practice session at Daytona, which is why I moved over to the Ti muffler. No problems since then.

CHASSIS / WHEELS / BRAKES / SUSPENSION
- 996 Frame w/ clean title
- Ohlins 999 Forks w/ Ohlins Valve Kit set up by Thermosman
- Penske Rear Shock, re-valved and re-sprung by Thermosman
- IMA Billet Offset Adjustable Triple Clamps (set at 28mm offset, with the steering head eccentric set at 23.5 degrees of rake). Comes with set of "pills" to adjust offset anywhere from 25mm to 31mm
- Ohlins Steering Damper
- Marchesini 10-spoke Forged Aluminum Wheels
- Brembo Billet Clutch Master Cylinder
- Brembo RCS Front Brake Master Cylinder w/ remote adjuster
- Braketech Full-Floating Front Brake Rotors
- Braketech Full-Floating Rear Brake Rotor
- Brembo 4-piston/4-pad Front Brake Calipers
- Aluminum Rear Subframe
- Aluminum Headlight Fairing Mount Bracket
- Woodcraft Billet Rearsets
- Woodcraft Billet Clipons w/ 2.5" rise and Long Bars
- Billet Euro Quick Throttle
- Speedymoto Frame Sliders
- Quick Release Dzus Fasteners

BODYWORK
- Ducati 996RS Carbon Fiber/Kevlar Fairings & DP Carbon Fiber Airbox w/ BMC Air Filters
- Ducati Performance Carbon Fiber Breather Box under the tail
- Ducati Performance Carbon Fiber Air Intake Runners
- Carbon Fiber Front Fender
- ETI Kevlar Composite Fuel Tank

ELECTRONICS
– Microtec ECU w/ 2 maps installed (one map is for Sunoco 110 octane leaded or 112 octane unleaded, and one is for VP MR4 (Greg preferred to use the VP fuel when running this bike at Daytona since he felt that the VP fuel was good for a few extra HP there). I used the 110 octane leaded fuel as that is the most commonly available at the tracks I raced at (and less than half the cost of the VP fuel).
- Custom Hypermotard Wire Harness - all unnecessary wires have been removed for weight savings
- Dynojet Quickshifter
- Hypermotard 1100 Dash
- Anti-Gravity Lithium Battery
- Keyless ignition switch

The engine alone cost over $15k to build when you factor in all the hard parts, service and price of the base engine itself. Total cost on the entire bike build is somewhere in the $40k range.

Asking $12k OBO for the bike and all the spares/extras.

The bike is located in Orlando, FL. Please PM or call/text to 407-697-0211 if you have questions or wish to purchase.

12/14/2021

SOLD - 2006 Yamaha YZ125 in very good condition and comes with a clean/clear FL title. This is the aluminum-framed model and an all around blast to ride. I bought this bike for my brother 2 years ago, I think he has maybe ridden it 5 times since then. And by "ride" I mean he rode it around his residential neighborhood in the Atlanta suburbs, he never took it to the track or even to any trails. After he bought his Tesla a few months ago he decided he wants an electric bike, so now the YZ is up for sale.

Always stored inside, never abused, low hours on the bike. The bike is currently located in Roswell, GA at my brother's house. Asking $3500 OBO.

Message me or text to 407-697-0211 if interested. I can assist with shipping if necessary but of course local pickup is always preferred.

Ducati Depot

03/20/2026

02/03/2026

06/15/2025

11/25/2024

02/10/2024

12/17/2023

12/10/2023

10/14/2023

07/08/2022

06/12/2022

12/14/2021

Address

Telephone

Website

Alerts

Contact The Business

Shortcuts

Share

Category