Pro-Action Suspension Of NJ

02/19/2025

Pro-Action has taken a different approach to curing the problems with the forks on the Harley-Davidson touring bikes. The forks on a street bike have no reason to have to be a high dollar cartridge system.

01/01/2024

https://pro-actionnj.com/wp-content/uploads/2023/12/5721c32bd5d31d5f95f69da28eaebbc1ny21.jpg

12/25/2023

https://pro-actionnj.com/wp-content/uploads/2023/12/merry-christmas-greeting-15435896829j8.jpg

11/11/2023

https://pro-actionnj.com/wp-content/uploads/2023/11/veterans.jpg

01/01/2023

05/08/2017

THE NEW HYBRID FORK KIT FOR THE WP 48AER AND SHOWA 49MM TAC FORKS:

Convert your WP AER48 or Showa TAC forks to a single sided spring kit with air assist. The best thing about spring forks is the low speed pick up and the only good thing about air forks is the bottoming resistance. We have combined these two systems and used the best of both worlds. The spring picks up all the small bumps and the air kicks in at the end of the stroke to prevent bottoming. We can run a little lighter spring rate than you would normally run allowing for ultimate plushness in the small bumps while using the air pressure to keep from bottoming. This system does not bleed off air like your stock forks, you won't pick up pressure throughout your ride because of expansion, and most of all it makes tuning a breeze. These are as close to Factory as you can get.

$599.00 for the Hybrid kit and $115.00 for the spring.
(Installation included at no extra cost with fork revalve or rebuild)

01/31/2017

New Hybrid fork kit for new WP AER forks. This is a SSF spring kit with air assist. The best thing about spring forks is the low speed pick up and the only good thing about an air fork is bottoming resistance. We have combined the two systems and used the best of both worlds. The spring picks up all the small bumps and the air kicks in at the last minute to prevent bottoming.

01/31/2017

New spring conversion kit for the 2017 KTM sx50/sx65 and Husky TC50/TC65 using the WP AER 35 fork. This is a SFF fork system. It replaces both the air side and the damper side internals. The air side fork internals are replaced with a coil spring system that eliminates stiction and harshness. The damper side internals are replaced with a twin tube cartridge system with a fully functional base and mid valve system that is revalvable. System can be installed inside the stock OEM tubes with no modifications. Spring included.

11/24/2016

11/21/2016

WP 50mm Adjustment Collars Available!

02/25/2016

Here at Pro-Action, we take mass-produced motorcycles and builds custom suspension for them to the specific needs of the owner. We start by selecting the correct spring rates to uphold the weight of the motorcycle and rider. We then determine the correct Pro-Action Valve Bodies to be used to match up with the valving systems to be installed. Pro-Action uses many categories of shock and fork valving: , , , , , and Off-Road. Once one of these categories is chosen, Pro-Action then designs a system that specifically fits the individual for height, weight, type of riding, class of competition, normal finishing position, and years of experience. Ground conditions and terrain are also considered.
http://www.pro-actionnj.com

Pro-Action of New Jersey | Leading edge technology in Motocross Suspension tuning