Loud Pipe Performance

Loud Pipe Performance Everything you need to make your project come to life! Engine/transmission rebuilds, power adders, +

This GT350 got fitted with some and spicy 91/E85 tunes. That voodoo sounds amazing at WOT Already had aftermarket x pi...
05/23/2026

This GT350 got fitted with some and spicy 91/E85 tunes. That voodoo sounds amazing at WOT
Already had aftermarket x pipe and factory valved axle back

🏎️

Fully built 5.7 Challenger with rods and pistons, ###ecutioner camshaft, and all the supporting mods. Already had the ...
04/22/2026

Fully built 5.7 Challenger with rods and pistons, ###ecutioner camshaft, and all the supporting mods. Already had the supercharger but we turned it up some more 👀 this paired with the tremec is a nasty combination. We added upgraded radiator, significantly larger heat exchanger for the supercharger, and external oil cooler to keep temps perfect.
Tuning done by
Block machined by

🏎️

After a rod bearing failure, we got this Camaro fixed up with a 416 stroker and F1A Procharger kit. Will be extremely na...
04/12/2026

After a rod bearing failure, we got this Camaro fixed up with a 416 stroker and F1A Procharger kit. Will be extremely nasty dialed in by GPI - Gwatney Performance tuning and with some of the best parts we could throw at it. Texas Speed & Performance Stroker kit, Carters Engine bored and prepped block, Katech Engineering oil pump, Late Model Engines vvt delete, GPI - Gwatney Performance ss2 cam, Automotive Racing Products Inc. main and head studs, ProCharger Superchargers F1A kit

🏎️ Adam Smith

Some solid gains for a cam only and intake LS3 👀 of course we almost always run the best cams, a SS3 matched this one p...
03/25/2026

Some solid gains for a cam only and intake LS3 👀 of course we almost always run the best cams, a SS3 matched this one perfectly. Dyno tune by

🏎️

Felt reasonable to post the shop Mustang as it closes in on completion for this set up. I’m sure I’ll be taking it furth...
03/17/2026

Felt reasonable to post the shop Mustang as it closes in on completion for this set up. I’m sure I’ll be taking it further next year. I take pride in what I do for my customers cars as much as I do my own cars. Extensive mod list that will keep growing.

- Stock gen 2 block with pistons, rods, and boss crank.
- T56 magnum xl swap with twin disc
- main and head studs and just about every other fastener
- MHS xtreme race blower cams, RGR lockouts with perfect circle gears, and primary and secondary guides and various other fittings
- dual vane OPGS, billet crank sprocket, and billet oil pump back plate
- hi ram with spacer and dual 69mm throttle body
- Paxton 2200HD headunit pullied down and lower overdrive damper
- proport BOV and .customs.mwc custom charge piping
- tuned
- k member and just about everything in the rear suspension
- crusader shocks
I’m sure there’s a lot more I could add but that’s the cool stuff

🏎️ @ me

ZL1 got a whole lot of upgrades 👀 PD3 cam kit and VVT delete kit, upper pulley, big gulp intake, headers and exhau...
03/11/2026

ZL1 got a whole lot of upgrades 👀 PD3 cam kit and VVT delete kit, upper pulley, big gulp intake, headers and exhaust, catch can, pro series converter, and an auxiliary fuel pump kit. Dialed in with a tune!

🏎️

LS3 camaro got some big upgrades with a SS3 cam and tune, twin disc clutch, and flex fuel kit. Fully resealed and upg...
03/10/2026

LS3 camaro got some big upgrades with a SS3 cam and tune, twin disc clutch, and flex fuel kit. Fully resealed and upgraded oil pump as well

🏎️

This cammed C7 came in with the torque tube completely locked up. Rebuilt it with upgraded poly bushings and new bearin...
03/01/2026

This cammed C7 came in with the torque tube completely locked up. Rebuilt it with upgraded poly bushings and new bearings and it’s even better than new. Added a trinity manifold with a tune

🏎️ .c7

One of our cammed LS3 camaro builds came back to add a good bit more power. Along with the GPI cam kit we put in it awhi...
02/21/2026

One of our cammed LS3 camaro builds came back to add a good bit more power. Along with the GPI cam kit we put in it awhile ago we installed a supercharger kit with an ATI damper and pinned the crank, auxiliary fuel pump kit, coilovers, and a full Superpro bushing kit. Retuned with the best

🏎️

L99 Camaro fitted with a LS3 conversion and BFD cam, converter, headers, and dialed in with a tune. It’s very rowdy ...
01/02/2026

L99 Camaro fitted with a LS3 conversion and BFD cam, converter, headers, and dialed in with a tune. It’s very rowdy for a stock intake set up 👀

🏎️ .405

Address

2429 S Douglas Boulevard
Midwest City, OK
73130

Opening Hours

Tuesday 10am - 6pm
Wednesday 10am - 6pm
Thursday 10am - 6pm
Friday 10am - 6pm
Saturday 10am - 6pm

Telephone

+18703357486

Website

Alerts

Be the first to know and let us send you an email when Loud Pipe Performance posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Loud Pipe Performance:

Shortcuts

Share

Category