McIver Custom Fabrication

Directions

McIver Custom Fabrication McIver Custom Fabrication
Hand Fabrication and Metalwork
Some turn key builds

1965 Mustang exhaust ready for tailpipes and tips. 2.5" purge welded. Borla mufflers fit snug in the space provided by t...
10/09/2026

1965 Mustang exhaust ready for tailpipes and tips. 2.5" purge welded. Borla mufflers fit snug in the space provided by the Roadstershop chassis.

Byson's 67 Chevelle exhaust finished out. 3" tailpipes tucked behind the bumper. Notched the frame to clear the coilover...
10/09/2026

Byson's 67 Chevelle exhaust finished out. 3" tailpipes tucked behind the bumper. Notched the frame to clear the coilovers, splash guards to finish out the fender wells.

Few Pictures of my 1967 C10 shop truck over 13+ years.
09/14/2026

Few Pictures of my 1967 C10 shop truck over 13+ years.

Updated the build album's from a while ago.
09/14/2026

Updated the build album's from a while ago.

Few pics of the exhaust purge welds and hangers I recently switched to. Simple Interlocking system to keep the v-bands f...
09/11/2026

Few pics of the exhaust purge welds and hangers I recently switched to.
Simple Interlocking system to keep the v-bands from rotating.

Doing two stainless purge welded exhaust systems at once. 1965 Mustang 2.5" exhaust. 1967 Chevelle 3.5" exhaust. Flex be...
09/11/2026

Doing two stainless purge welded exhaust systems at once.
1965 Mustang 2.5" exhaust.
1967 Chevelle 3.5" exhaust.
Flex bellows, flowing x-pipe, lacing it thru the chassis to not hang below the scrub line. Magnaflow mufflers and full tailpipes next.

Byson's 1967 Chevelle 3.5" exhaust system purge welded. 2.5" h-pipe, vibrant resonators, 50series Hd flowmasters, cut ou...
09/11/2026

Byson's 1967 Chevelle 3.5" exhaust system purge welded. 2.5" h-pipe, vibrant resonators, 50series Hd flowmasters, cut outs with 3.5" oval tubing, driveline loop, oem style hangers, notched the rear footwell to give the exhaust as much ground clearance as possible. Added the center body mount on the chassis tubing, 3" full tailpipes next.

1965 Mustang engineering. Modified the stock air cleaner. Coil mount done, covered the script on the heads in the proces...
09/11/2026

1965 Mustang engineering.
Modified the stock air cleaner.
Coil mount done, covered the script on the heads in the process.
Battery cover and aluminum quick release panels in the trunk.
Dash components all test fitted.

Closing in on Byson's 67 chevelle trunk work. Removable Coilover covers,inner quarter panel protection .100 aluminum, su...
07/11/2026

Closing in on Byson's 67 chevelle trunk work. Removable Coilover covers,inner quarter panel protection .100 aluminum, suspension tie in bars reworked after the holes got fix washers, upper link bars extended, Ricks tanks in with dual pumps.

1965 Mustang progress. Fitting everything before paint. Making everything aftermarket fit decent is a chore. Parts comin...
04/30/2026

1965 Mustang progress.
Fitting everything before paint. Making everything aftermarket fit decent is a chore. Parts coming off for etch blast, sealer, powder coat for final assembly. Soon this will be heading off to paint.

Address

Meridian, ID

Website

Alerts

Be the first to know and let us send you an email when McIver Custom Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category