Dark_Knight_WJ

Dark_Knight_WJ Follow along as the WJ gets built and taken on adventures.

Getting the hubs installed pair with lockouts. Also got the high steer arms installed and ball joints in. 4w...
03/02/2026

Getting the hubs installed pair with lockouts. Also got the high steer arms installed and ball joints in.






4wd



So stoked when parts start coming in. My from came in today can wait to get these installed and the jeep sitting on i...
02/09/2026

So stoked when parts start coming in. My from came in today can wait to get these installed and the jeep sitting on its own weight.




4wd




Are you watching KOH2026? This is my
02/08/2026

Are you watching KOH2026? This is my

Got the truss welded up and one of the high steer mounts. Waiting for the reamer to come in to drill out the factory mou...
11/03/2025

Got the truss welded up and one of the high steer mounts. Waiting for the reamer to come in to drill out the factory mounting location on knuckle. Now I need to finish up the knuckles and get front gears and locker ordered.

4wd


Getting the next step of the swap started. I have the factor brackets cut off and tubes cleaned. Getting the truss mocke...
10/18/2025

Getting the next step of the swap started. I have the factor brackets cut off and tubes cleaned. Getting the truss mocked into place. 1 step closer. I am using the .4wd TJ truss on the WJ due to the fact that the truss sits 2” higher like the WJ factory mounts do. Everyone else’s are lo-pro sonI would loose that height. I am still planning on running the 5.5” springs for a TJ like rear to keep the level.

If you are out .hero make sure you stop and grab some jerky from there habanero is spot on great flavor with a little h...
10/04/2025

If you are out .hero make sure you stop and grab some jerky from there habanero is spot on great flavor with a little heat.

Had a really fun time today .hero did the Definitely different wheeling a truck with than it is wheeling a . ...
09/30/2025

Had a really fun time today .hero did the Definitely different wheeling a truck with than it is wheeling a .

Made out to .hero got all set up at can’t wait for the week of fun.
09/28/2025

Made out to .hero got all set up at can’t wait for the week of fun.

On my way to .hero stopped in Vegas for the night. Before I leave to had to stop by for some food and a couple beers. C...
09/27/2025

On my way to .hero stopped in Vegas for the night. Before I leave to had to stop by for some food and a couple beers. Come say hi at trial hero I will be hanging out with

Finally got the rear suspension to a point where it can sit at full stuff. Now to figure out what coilovers to run in th...
06/20/2025

Finally got the rear suspension to a point where it can sit at full stuff. Now to figure out what coilovers to run in the rear and replace the rear bumper. Then we should be off to the front.

Had a little time this morning to get some installed to hold the axle shafts in.
05/18/2025

Had a little time this morning to get some installed to hold the axle shafts in.


Address

Menifee, CA
92585

Website

Alerts

Be the first to know and let us send you an email when Dark_Knight_WJ posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category