BRAD FAB Industries

BRAD FAB Industries Welding and metal fabrication shop located in Media Pennsylvania. Shop: 630 S Ridley Creek Road, Media Pa, 19063. Phone: 610-566-0322
Hours: M-F 8am-5pm.

Weekends: Appointment Only. MIG / TIG Welding
Full & Back Half Chassis
Custom Suspensions
Roll Cages
Exhaust Systems
Headers / Manifolds
Steel-Stainless-Aluminum Work
Auto-Motorcycle-Industrial-Decorative Metal Repairs

09/11/2026

Customer asks for a gate and asks if we can put a specific pattern they like in it so here ya go…. No prob.
The design was one they supplied and we modifi d it to their liking as far as size of gate they wanted.
Anything can be done.
Super simple. Concreted into the ground and also brackets bolted to the house so it’s nice and strong.




Can only take one shop vehicle out at a time but chat GPT took all three for a rip today…. Absolutely mind blowing
08/31/2026

Can only take one shop vehicle out at a time but chat GPT took all three for a rip today…. Absolutely mind blowing




That new dump floor is ready to get put to the test…..Anything is salvagable and replaceable
08/26/2026

That new dump floor is ready to get put to the test…..
Anything is salvagable and replaceable



Shop trucks have to be cool or you’ll be bored driving to the job it’s that simple.
08/25/2026

Shop trucks have to be cool or you’ll be bored driving to the job it’s that simple.




Get on with it and weld that floor in! Clean, cut, weld…
08/25/2026

Get on with it and weld that floor in!
Clean, cut, weld…



So bad ass seeing a car we did a custom air suspension set about 10 years ago or so still rolling around. Bad ass car f...
08/23/2026

So bad ass seeing a car we did a custom air suspension set about 10 years ago or so still rolling around. Bad ass car for sure! chillin at Chesapeake inn car show!
Anthony Andy Epright




This project was a team effort, and we are delighted with the outcome. One of the notable achievements was the fabricati...
01/27/2026

This project was a team effort, and we are delighted with the outcome. One of the notable achievements was the fabrication of an 18-inch diameter exhaust vent, designed to be attached to an existing fan situated on a catwalk. By leveraging our CNC plasma table and roller, we successfully achieved a precise 90-degree bend, thanks to a custom-made template used for pie cutting the tubing. We look forward to receiving your feedback on this project.

A client of ours recently brought in a BMW motorcycle that he had been restoring and wanted to add some custom features....
07/23/2025

A client of ours recently brought in a BMW motorcycle that he had been restoring and wanted to add some custom features. Our team initiated the process by cutting off the rear of the original frame and fabricating new tubes to reconfigure the rear end. We also added a new lower cross bar, equipped with a mount and gussets, to support a laid-down suspension. Following the client’s completion of the mockup, we slugged the new rear half and welded everything together. At a later date, we fabricated mounts for a rear fairing, seat pan, and electronic tray, which also secured the computer. We look forward to seeing the finished product. For any metal fabrication needs, please call 610-566-0322 or send a text message to the same number, and we will get back to you.











A customer recently visited our shop with his 1960s Plymouth Duster, requesting an upgrade to the center section of his ...
07/03/2025

A customer recently visited our shop with his 1960s Plymouth Duster, requesting an upgrade to the center section of his exhaust system to achieve a more aggressive sound profile. We replaced the existing mid-section and mufflers with high-performance Borla mufflers and tubing, incorporating a switch-back cut-out section that enables the exhaust to bypass the mufflers, exiting alongside them. The system was fully wired, allowing the customer to transition from a mild to a wild exhaust note with the simple press of a button conveniently located on the dashboard. For any inquiries regarding custom exhaust systems or metal fabrication, please contact us at 610-566-0322.

Shop truck is Rad!
06/28/2025

Shop truck is Rad!








Address

630 Ridley Creek Road
Media, PA
19063

Opening Hours

Monday 8am - 6pm
Tuesday 8am - 6pm
Wednesday 8am - 6pm
Thursday 8am - 6pm
Friday 8am - 6pm
Saturday 9am - 7pm

Telephone

+16105660322

Website

Alerts

Be the first to know and let us send you an email when BRAD FAB Industries posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to BRAD FAB Industries:

Shortcuts

Share

Category