B’s Fab & Tuning

06/29/2026

Customer states he wants to turn up boost

06/28/2026

Today I was tasked with wiring in a resistor box in 2026. So I made a video about it.

I highly recommend going with a FIC, ID, or the most budget FID injectors. There’s no reason to be running a resistor box in 2026 when there’s so many other options out there.

06/27/2026

Car has a no start condition. Let’s troubleshoot it!

06/25/2026

Sr20det 240!
Tuned on Nismotronics
225/211
6-7 psi
Small turbo

Finally one of our cars sees the rollers! I tuned this setup years ago and it’s just been driving around on a street tune. Funny thing is, there wasn’t any gains to be made on the dyno. Fueling & timing were right where they needed to be at. We tried turning up the boost controller but the boost controller started acting real china. So new boost controller and we’ll give her the proper boost she deserves!

I was hinting that it needs a link ecu to really party 😉

06/12/2026

Coming soon! Stay tuned!

I’ve gotten many messages over the years regarding HpTuners. So it’s finally time to bring it on board 🫡

If you’ve messaged me in the past regarding hptuners, and still need help with it, go ahead and shoot me another message so I can get you in line!

06/07/2026

K24 swapped Ep3
220/190
45 degree vtc
4 piston oil pump

Seems we have a slight restriction with the exhaust. Clients gonna swap some parts around and see how much we pick up with different bolt ons 🤟🏼

06/05/2026

eBay turbo Lsv
Unknown turbo
9 psi
Rc 440s

250/217

This car had a very restrictive exhaust setup. Only revving to 7500 to keep it nice and conservative!

05/27/2026

2jz swapped G35 update!

Couple weeks ago I wired in two 12” spal pusher fans, wired the wideband into the canbus system on the link ecu, mounted the intercooler, & made custom 20an lines for the radiator. Next up is intercooler piping fabrication, then she should be ready for the rollers!
-powered by a 2jzge-nat (non vvti bottom end with arp rod bolts)
-Is300 vvti head
-LinkEcu
-wiringspecialties pro level harness
-90mm billet intake/TB (cable conversion for the G35 chassis)
-Top mount T4 divided turbo manifold.
-Psr gt3584 .84 Turbo
-Link Flex fuel sensor
-Bosch wideband knock sensors
-Twin disc clutch
-ID 1050cc injectors (limiting factor)
-Dual 525 fuel pumps in radium fuel pump hanger
- 8an feed line, -6an return.

She’s almost ready for all the summer activities 🫡

05/25/2026

This is what we run on our 2jz swapped G35 🤟🏼

The XtremeX is at the top of our G4X ECU range, with built in E-throttle and advanced features including Anti-lag, Paddle Shift Control and Traction Control.
- 8 Injector drives
- 8 Ignition channels
- 10 Auxiliary outputs
- 2 x CAN bus
- 512 Megabytes Data Logging
- 45 general purpose tables
+ So much more…

More info here: http://ow.ly/u1fz50LHZfq

Find a Link Reseller: http://ow.ly/kr1v50M1xy1

05/24/2026

B20v EF hatch
12.3.1 comp
S2 Tuner 1 cams
2.5” exhaust
Pump 92

196/149