Triple Threat Performance

Triple Threat Performance We specialize in performance upgrades, installs, light fabrication, and maintenance!

Return customer with his Whipple gt350 came in for some longtubes and xpipe install. James Whtyote Vaughn got him hooked...
04/13/2026

Return customer with his Whipple gt350 came in for some longtubes and xpipe install. James Whtyote Vaughn got him hooked up get that voodoo screaming

03/16/2026

Been a busy weekend on both the Ford and Chevy fronts for us!
Along with the S650 Whipple Superchargers job, we also had a C7 come in from Austin Harleman for a shifter cable replacement and wrapping/installing the axleback.

We appreciate you trusting us with the Vette and try not to get into trouble with how loud it is πŸ˜‚

As always you guys, DM us to get your car setup next 🫑

Another gen6 stage 1    install on this a10 s650. These kits are so nice and install is relatively easy. Hit us for inst...
03/14/2026

Another gen6 stage 1 install on this a10 s650. These kits are so nice and install is relatively easy.

Hit us for install quotes we are also teamed up with for parts and tunes for our ford family

Part 2 of new edge day is Joshua Demmi coyote swapped new edge. May have recognized it before from the rear end built we...
03/08/2026

Part 2 of new edge day is Joshua Demmi coyote swapped new edge. May have recognized it before from the rear end built we recently did in it. Well it's back for minor work. Unfortunately during rebuild new pinion was missing so we had to reuse old one but it didn't seal fully and had a slow leak. Well now we got that fixed. He wanted to lower it s bit more in the front and to get alignment dailed in. We maxed out his caster/camber plates and it was still out of spec. So i hooked him up with a set of caster/camber bolts to get the little adjustment we need to get him back in spec so he wouldn't eat his tires up. Didnt get pic of final adjustments but we got him where he wanted and back on the road

It's new edge day so first up is Edward August Scheper V  2v. This was a rough one but got him back on. Outter pinion be...
03/07/2026

It's new edge day so first up is Edward August Scheper V 2v. This was a rough one but got him back on. Outter pinion bearing left the chat. Didn't think i was going to be able to save this rear end due to pinion race/cup literally having roller cage welded to it and it freely being able to slide in and out of diff housing. Was able to save it and get his new carrier and ring smg pinion installed and get him back on the road

Been a busy last 2 days.  brought us his beautiful gen3 in for some  longtube install. Now he can terrorize unsuspecting...
03/07/2026

Been a busy last 2 days. brought us his beautiful gen3 in for some longtube install. Now he can terrorize unsuspecting citizen with the screams of 460 horses

A bit out of our usual but Collin Scott  is a long time customer of our even before we started this TTP venture from bot...
02/21/2026

A bit out of our usual but Collin Scott is a long time customer of our even before we started this TTP venture from both his 13/20 mustangs, his f150 and now is f250. Had a street meeting with a deer and it didn't end well. Broke a fitting on his sender and had one installed. We'll the guy threw out the oring and caused a big leak issue so we got him fixed up.....then surprised me with these light so if course we got em installed and wheels tested our strength πŸ’ͺ🏾 πŸ’ͺ🏾πŸ’ͺ🏾πŸ’ͺ🏾😭

Customer brought us his gen2 with clutch issue. Give weld broke on pedal assembly. Not the first I've seen it but we got...
02/15/2026

Customer brought us his gen2 with clutch issue. Give weld broke on pedal assembly. Not the first I've seen it but we got him fixed up with a new assembly to get him back on the road

Old one but forgot to post. Got .2v coyote and t56 swapped new edge in for gear swap from 4.10 to 3.73. Got him all fixe...
02/15/2026

Old one but forgot to post. Got .2v coyote and t56 swapped new edge in for gear swap from 4.10 to 3.73. Got him all fixed up and back on the road.

#8.8rearend

We had  beautiful gen3 back in for a oil leak with his new motor we recently installed. Found the oil pan was leaking fr...
02/15/2026

We had beautiful gen3 back in for a oil leak with his new motor we recently installed. Found the oil pan was leaking from gasket not sealing so we got him fixed with a new one to get him back on the road

Costumer brought us his gen3 mustang gt for some longtube header install. Opon inspection found rear shocks lower mounti...
02/15/2026

Costumer brought us his gen3 mustang gt for some longtube header install. Opon inspection found rear shocks lower mounting bolts missing. Got the headers installed and some new hardware for the shocks to insure a safe ride

 brought us his beautiful 19 f150 for crank no start. Found a rarity that the crank sprocket broke and pulled the keyway...
02/15/2026

brought us his beautiful 19 f150 for crank no start. Found a rarity that the crank sprocket broke and pulled the keyway out of the crank. Luckily only damaged cylinder 6 exhaust valve from doing leakdown on all the cylinders. He opted to replace the head and upgrade the turbo coolant lines to -an fittings and arp head studs. Got her back to purring like a kitten

Address

Mary Esther, FL

Website

Alerts

Be the first to know and let us send you an email when Triple Threat Performance posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share