JSR Wire Solutions

Call Directions

JSR Wire Solutions JSR Wire Solutions is focused on wiring, plumbing, and aftermarket part(s) installation.

Contact us for a quote to get your vehicle wired, plumbed, and much more for less stress on the street or the track!

01/18/2026

Need your car wired before the season starts? Contact us today, we will have openings very soon!

Just a little update, we are investing in our future! Huge 30x47 building going up foundation is done. Next up will be p...
10/25/2025

Just a little update, we are investing in our future! Huge 30x47 building going up foundation is done. Next up will be pad and framing! We can't wait til this space is done and will allow us to attack more jobs simultaneously. We are still accepting new jobs if you need anything don't hesitate to contact us!

🔥 Tyler Jeffery’s WS6 — Full Systems Overhaul 🔥All fresh wiring, fueling, and air system work handled in-house 👇🔧 Wiring...
08/06/2025

🔥 Tyler Jeffery’s WS6 — Full Systems Overhaul 🔥
All fresh wiring, fueling, and air system work handled in-house 👇

🔧 Wiring:

Full chassis harness built with Tefzel wire & Raychem DR25

Controlled by a Hardwire PDM28

Factory window switches retained

Kubota multifunction switch for turn signals, headlights & popups

Custom mount on Motion Raceworks shifter holds:
🔘 Blink Marine 12-button keypad
🌀 MAC valve for air shifter
🛑 Kill Switch

💨 Boost Control:

Mounted & plumbed Viair air compressor + tank for dome pressure

⛽ Fuel System:

RSM fuel cell installed

Custom AN lines

Aeromotive 5.0 GPM brushless pump

🛠️ Service Work:

Engine oil + filter changed

Trans pan replaced & serviced

Trans cooler relocated w/ fresh AN lines

🧰 Clean. Functional. Ready for power.

07/27/2025

Got a 25 Can Am X3 Maverick all wired up with whip lights, and turn signals so it can be street legal here in WV, We are still working on Tyler's car, all wiring is complete but we are dealing with some mechanical issues with the transmission but should be finalized this week and he will be picking up very soon cant wait for him to get it back and not have to worry with any issues.

🚨 Project Update – Tyler Jeffery’s WS6 🚨We’ve been making some serious progress on Tyler Jeffery’s WS6 and wanted to dro...
06/03/2025

🚨 Project Update – Tyler Jeffery’s WS6 🚨

We’ve been making some serious progress on Tyler Jeffery’s WS6 and wanted to drop a quick update on what’s going down in the shop:

✅ Motion Raceworks shifter is in and looking right at home, with our custom-made keypad, e-stop switch, and MAC valve mount.
✅ Wiring is still on going — the harness is 90% mounted and fully covered in nothing but the best DR-25
✅ One of our favorite parts? We’re reusing the factory window switches — not only do they look OEM clean, but they work like a charm. Full driver control over the passenger window and passenger-side control too (if the car ever gets one 😎)
✅ Fuel system layout is started and we’re on track to have it fully plumbed by the end of the week

If you’re trying to level up your build like Tyler — clean installs, smart wiring, and OEM+ — hit us up today. Let’s make your car next on the lift 🔧💥

05/27/2025

Small update from the other day on Tyler Jeffery car, we got OEM switches working with the Hardwire PDM 28! Only few bits and pieces to wrap up with this car and she will be on her way out of here!

All of the wire for a upcoming project we have for Brice Billings street car, after we get Tyler Jeffrey badass WS6 wi...
05/21/2025

All of the wire for a upcoming project we have for Brice Billings street car, after we get Tyler Jeffrey badass WS6 wired up, more updates to come in the next few days with that car!

Wired up Josh Williams twin turbo Camaro featuring a GM LSX 376 and a T56 Magnum F. This build is controlled by a Holle...
05/20/2025

Wired up Josh Williams twin turbo Camaro featuring a GM LSX 376 and a T56 Magnum F. This build is controlled by a Holley Dominator EFI and is running on full CO2 boost control.

We used a Race Wire Solutions 8-relay PDM to cleanly power all essentials — including the in-tank lift pump and all three pumps in the Radium Engineering surge tank setup. The same PDM also handles power for the line lock.

The CO2 system is fully integrated into the Dominator with outputs wired directly to solenoids, and we plumbed the system to handle dome pressure control for consistent boost management.

To keep things functional and street-friendly, we retained and utilized the OEM body harness to power the Dominator, preserving factory features like door locks, windows, and the trunk hatch — all still operable by the key.

A clean, functional, and race-ready setup that still has OEM convenience. Solid setup for street or strip.

Wiring has paused for a bit for Tyler Jeffrey's WS6 while we wait for some connectors, and mounting hardware but the wor...
05/04/2025

Wiring has paused for a bit for Tyler Jeffrey's WS6 while we wait for some connectors, and mounting hardware but the work continues mounting this Rock Solid Motorsports 14 Gallon fuel cell, and a Aeromotive Fuel Systems 5.0 GPM Brushless Fuel Pump! We also removed the factory fuel tank at the customers request.

Address

Martinsburg, WV
25401

Telephone

(304)8392816

Website

Alerts

Be the first to know and let us send you an email when JSR Wire Solutions posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Sponsored

Share

Category