Opie's Garage

Opie's Garage Custom bike shop located in Colerain, OH. Specializing in custom builds and general repairs.

We also sell aftermarket parts through Parts Unlimited/Drag Specialties

03/01/2026

Riding season is here!!! Limited spots. 3 hole oil change $225. Safety check $100.

It’s been awhile since I posted anything. Don’t worry, I’m still alive and wrenching. In the last couple of years I have...
02/13/2026

It’s been awhile since I posted anything. Don’t worry, I’m still alive and wrenching. In the last couple of years I have realized one thing with evos, twin cams, and M8s. At or before 30,000 miles, change your lifters. This one clocked in at 32,000. We caught it before the roller exploded, which saved a complete engine rebuild. But, the front cam was damaged enough that I had to replace both. I can’t stress this enough, CHANGE YOUR LIFTERS!!!

And if you hear a louder than normal valve train noise, shut the bike off and call for a trailer. I figure a few more miles and this could’ve been a lot more expensive.

Hopefully in a few more weeks, I’ll see you all on the road.🤘

Moving right along. For being 41 years old, this motor looks good. Now that I know what I need, it’s time to get the par...
08/18/2025

Moving right along. For being 41 years old, this motor looks good. Now that I know what I need, it’s time to get the parts ordered and re-assemble.

So it begins……. 1984 Shovelhead.
08/16/2025

So it begins……. 1984 Shovelhead.

After much deliberation, discussion and deep thinking. I have decided to close the doors on Opie’s Garage LLC. As long a...
06/29/2025

After much deliberation, discussion and deep thinking. I have decided to close the doors on Opie’s Garage LLC. As long as I can still turn a wrench, there will always be an Opie’s Garage, but it’s gonna be a much smaller and personal experience. I have discovered that as a business man, I make a pretty good mechanic. Dealing with over-head and scheduling have just become more work than I want to deal with. All warranties are still in effect and I will honor them personally. This page will be open, plus my personal Facebook. Most of you have my personal number anyway. Don’t be afraid to reach out if you have a problem. I have met some great people over the last few years. I’ve made many friends from those people. Keep riding and I’ll see you out there.

From a 1989 Evo I’m currently restoring. Bottom cam is stock. Top cam is the Andrews EV27. Not much difference in lift b...
04/17/2025

From a 1989 Evo I’m currently restoring. Bottom cam is stock. Top cam is the Andrews EV27. Not much difference in lift but look at that duration. Almost twice as long. In my opinion Harley made their best engine when they created the Evolution. Andrews made it perfect with EV27 cam.

Have an Evo you want to bring to life? Bring it to Opie’s Garage. We love Evolutions!

04/17/2025

🚨 GIVEAWAY 🚨

For every trailer or building sold your name will be entered into the drawing!

When: 4/17/2025 till 04/30/2025

Drawing will be on 05/01/2025

What do you win?!?
1. Triple Ball Trailer Hitch: worth $60.00
2. Premier Building T-Shirt
3. Trailer Hitch Pin
4. Trailer Pin
5. Premier Building Hat
6. 2 Beer Koozie
7. Trailer Light Connector
8. Big G Auotmotive & Fabrication Coupon Book with over $500+ savings!

Call today to get a building or trailer!
We have plenty in stock and available to go today!

740-632-4391 or 740-317-5770

I’m not one to worry about followers and such. Glad to have everyone along for the ride. This however, is too monumental...
04/16/2025

I’m not one to worry about followers and such. Glad to have everyone along for the ride. This however, is too monumental not to mention. Opie’s Garage has 666 followers on facebook. Thanks to everyone and let’s sin together! 🤘

With a lot of help after my latest episode, I was able to finish my latest build. 2019 Street Glide Special. S&S 475 cam...
04/14/2025

With a lot of help after my latest episode, I was able to finish my latest build. 2019 Street Glide Special. S&S 475 cam kit, complete with cam plate, oil pump, and lifters. Fuelmoto Level Z plus 1 CNC ported heads. 121” Wiseco pistons. TAB performance exhaust. S&S air cleaner and 55mm intake manifold. Topped off with a ThunderMax ECM. To keep everything under control I added a Barnett Scorpion clutch with a clear derby cover.

This thing pulls like crazy and is fast!! Thanks to Cody Gibson for the oppurtunity to build this beast

Special thanks to my wife Christie Strahl. She did all the heavy lifting. I am not allowed to do much with the heart condition. You’re the best honey!

The warm up begins next week. I bet a few bikes will need a battery. I know mine does. These batteries, pictured below, ...
02/21/2025

The warm up begins next week. I bet a few bikes will need a battery. I know mine does.

These batteries, pictured below, fit all Harley baggers from 1999 to present. We can get almost any battery for any bike, but wanted to represent the largest group of customers we have.

MSRP for the Drag Specialties is $146.96
MSRP for the High Performance is $185.95
MSRP for the Premium is $246.95

Ask to join our new discount club “Opie’s Dog House” and recieve a 10% discount on every purchase from us. It costs nothing to join. You just need to share one of our ads to be enrolled.

,

We are an approved Part Unlimited/Drag Specialties dealer. We can get almost any product for you from Harleys to metrics...
02/19/2025

We are an approved Part Unlimited/Drag Specialties dealer. We can get almost any product for you from Harleys to metrics, street, dirt, 4 wheelers, and side by sides. We also offer helmets and riding gear. Shop local and probably save money compared to the online retailers. Most items can be received at our shop in 2-3 business days and we can also drop ship directly to you for a $20 fee.

Area shops can reach out to us for a commercial/business discount.

Just a few observations from a recent job. The first picture is inner cam bearings. The one on the left is stock. The on...
02/18/2025

Just a few observations from a recent job.

The first picture is inner cam bearings. The one on the left is stock. The one on the right is a much improved aftermarket. Notice there are twice as many rollers in the aftermarket? That’s why they hold together so much better.

The second picture is of a couple of solid push rods. The one on the left is stock Harley. The one on the right is from Feuling. The Feuling rod weighs almost twice as much as the stock. Much more beefier.

If you’re getting into the cam compartment, these are 2 relatively cheap improvements I highly recommend to extend the life of your motor. Both are available through our dealership cheaper than anywhere else.

Address

55260 Colerain Pike
Martins Ferry, OH
43935

Website

Alerts

Be the first to know and let us send you an email when Opie's Garage posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Opie's Garage:

Shortcuts

Share

Category