Stang parts N More

06/11/2026

NEW UPR Adjustable Front Sway Bar End Links Lowered 1.5"+ (fits 05-14 Mustang)

***NEW PRODUCT RELEASE***

UPR Adjustable Front Sway Bar End Links Lowered 1.5"+ (fits 05-14 Mustang)

Adjust your front sway bar with confidence with these new Race Adjustable Billet Sway Bar End Links for your 2005-2014 Mustang lowered more than 1.5". Double adjustable for easy on the car adjustment and Teflon lined rod ends eliminate all slop the factory end links allow.

CNC Machined from 6061 Billet Aluminum and includes Teflon lined rod ends for ultimate durability.

Product Features:
» Billet Race Adjustable Sway Bar End Links
» CNC Machined 6061 Billet Aluminum
» 8" Closed and 9.5" Open
» Teflon lined Rod Ends
» Double Adjustable
» Brushed Satin Finish

Fits These Vehicles:
2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 Mustang 4.6L 5.4L 5.0L 4V 3V V6 V8 GT GT500 Shelby Saleen and Roush Vehicles.

Sku - 2011-02

RETAIL IS $129.99 SHIPPED IN THE CONTINENTAL US.

Contact us directly for best pricing. Sales tax does apply in Florida

06/11/2026

NEW UPR Xtreme-Series Under Axle Anti Roll Bar Kit

NEW PRODUCT RELEASE

UPR Xtreme-Series Under Axle Anti Roll Bar Kit (fits 79-04 Mustang)

The UPR Xtreme-Series Anti-Roll Bar Kit for under the Axle is a great option for the serious racer in eliminating body roll and stabilizing the car down the track. Our Anti Roll Bar features CNC Billet Aluminum bearing caps with needle roller bearings, 3/16" thick mounting tabs, forged steel arms 6" center to center, 28" of 1-5/8" Tubing allowing up to 24" center to center on the arms and 12" of 1" tubing for the link bars. Bar and link assemblies comes unwelded to allow it to be tailored to your specific set up. This style bar is great for maximum exhaust clearance or in cars that are lowered and have minimal clearance between the axle housing and floor of the car. This is the same bar used in our Ultra Street car that has gone 1.06 60 foot.

Anti-roll bar is designed for drag race use only. Links must be disconnected while driving on street to prevent damage.

Installs in 2-3 hours, welding is required and mounting hardware is included.

Product Features:
» Welding Required
» 6" Forged Steel Arms center to center
» 28" of 1-5/8" 4130 Chrome-Moly Tubing
» Allows for 24" center to center on the Arms
» Designed to be installed under the Axle
» Eliminates Body Roll & Stabilizes the car
» CNC Billet 6061 Bearing Caps with Roller Bearings
» Tabs can be welded to the front frame rail or Xtreme Upper Torque Box hoop
» Ideal for Maximum exhaust clearance or Lowered builds with minimal axle to floor clearance.

Fits These Vehicles:
1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 LX GT GTS Mustang Mach 1 Bullitt Cobra* Shelby Roush Saleen & Vehicles.

* Does not work on cars with IRS.

Sku - 2000-09

RETAIL IS $449.99 SHIPPED IN THE CONTINENTAL US.

Contact us today for best possible pricing. Sales tax does apply in Forida!

THIS IS A MUST FOR CARS WANTING TO RUN TAIL PIPES!

06/11/2026

NEW UPR VTA Billet Breather Tank (fits 24-26 Mustang GT)

NEW PRODUCT RELEASE

NEW UPR VTA Billet Breather Tank (fits 24-26 Mustang GT)

UPR Plug N Play™ Breather Tank Kit for naturally aspirated 2024-2026 5.0L Mustang GT. This exclusive kit easily mounts to the passenger side of the engine compartment with the new UPR quick release Clock able Bracket design allows the Breather Tank to be mounted in many positions to accommodate your needs.

Designed to provide the best oil control without any questions. 100% CNC machined Oil Separator System provides the most sure fire way to eliminate any chances of oil getting into your inter-cooler and intake tract since there is no connection to intake vacuum or air inlet tubes. This is the only complete ready to go no modifications needed Plug N Play™ Breather Tank System for your S650 Mustang!

From the exact fit UPR Braided lines, Exclusive UPR Plug N Play™ fittings and UPR Quick Release Billet mounting bracket system. Giving you everything needed to protect your engine from any unwanted Blow-by. UPR Breather tanks are easy to drain with either the provided petcock or you can unscrew the containment cup to drain, inspect and clean the contents out. You can't do that with those over priced welded up breather tanks!

Vent to Atmosphere breather tanks are for Racing / Off Road use only and do not comply with any emissions regulations. Additional tuning may be required. If you install this kit on a street driven vehicle you assume all liabilities for any emissions inspection fines or inspection denial. If you are sensitive to odors, this may not be for you since crankcase fumes will be vented from the filter on the breather tank.

THIS PART DOES NOT CARRY AN CARB EO NUMBER, AND THEREFORE IS FOR RACING / OFF ROAD USE ONLY. NOT FOR SALE OR USE IN CALIFORNIA DUE TO CARB/EMISSIONS.

Product Features:
» Show Quality Finish
» Easy 20 minute install
» Can measures 6.00" x 3.00"
» For Off Road / Racing use only
» High Quality CNC Machined Billet Aluminum
» Vents oil vapor/crankcase pressure to atmosphere
» 5/8" Oil Resistant Continental Braided Hose included
» Improves Fuel Economy, Throttle Response & Performance
» Designed to be a complete Plug N Play™ System for the Mustang GT
» Available in Satin Silver or Black

Fits These Vehicles:
2024 2025 2026 Mustang GT. Does not fit Procharger, Whipple, Roush or Stock applications with a stock style air boxes in place.

Sku(s) -
5029-292 (Satin Aluminum Silver)
5029-292-1 (Black)

RETAIL PRICING IS $299.99 SHIPPED IN THE CONTINETAL US. Contact us directly for best possible pricing. Sales Tax applies in Florida.

06/11/2026

NEW UPR VTA Billet Breather Tank (fits 24-26 Mustang GT Whipple, Roush Supercharger)

NEW PRODUCT RELEASE

NEW UPR VTA Billet Breather Tank (fits 24-26 Mustang GT Whipple, Roush Supercharger)

UPR Plug N Play™ Breather Tank Kit for 2024-2026 5.0L Mustang GT with a Whipple or Roush Supercharger System. This exclusive kit easily mounts to the passenger side of the engine compartment with the new UPR quick release Clock able Bracket design allows the Breather Tank to be mounted in many positions to accommodate your needs.

Designed to provide the best oil control without any questions. 100% CNC machined Oil Separator System provides the most sure fire way to eliminate any chances of oil getting into your inter-cooler and intake tract since there is no connection to intake vacuum or air inlet tubes. Ideal for race cars running a Whipple or Roush supercharger system. This is the only complete ready to go no modifications needed Plug N Play™ Breather Tank System for your Whipple or Roush S650 Mustang!

From the exact fit UPR Braided lines, Exclusive UPR Plug N Play™ fittings and UPR Quick Release Billet mounting bracket system. Giving you everything needed to protect your engine from any unwanted Blow-by. UPR Breather tanks are easy to drain with either the provided petcock or you can unscrew the containment cup to drain, inspect and clean the contents out. You can't do that with those over priced welded up breather tanks!

Vent to Atmosphere breather tanks are for Racing / Off Road use only and do not comply with any emissions regulations. Additional tuning may be required. If you install this kit on a street driven vehicle you assume all liabilities for any emissions inspection fines or inspection denial. If you are sensitive to odors, this may not be for you since crankcase fumes will be vented from the filter on the breather tank.

THIS PART DOES NOT CARRY AN CARB EO NUMBER, AND THEREFORE IS FOR RACING / OFF ROAD USE ONLY. NOT FOR SALE OR USE IN CALIFORNIA DUE TO CARB/EMISSIONS.

Product Features:
» Show Quality Finish
» Easy 20 minute install
» Can measures 6.00" x 3.00"
» For Off Road / Racing use only
» High Quality CNC Machined Billet Aluminum
» Vents oil vapor/crankcase pressure to atmosphere
» 5/8" Oil Resistant Continental Braided Hose included
» Improves Fuel Economy, Throttle Response & Performance
» Designed to be a complete Plug N Play™ System for the Mustang GT
» Available in Satin Silver or Black

Fits These Vehicles:
2024 2025 2026 Mustang GT with a Whipple or Roush Supercharger Kit. Does not fit Procharged or Stock applications with a stock style air boxes in place.

Sku(s) -
5029-295 (Satin Aluminum Silver)
5029-295-1 (Black)

RETAIL IS $299.99 SHIPPED IN THE CONTINENTAL US. Contact us today for best possible pricing. Sales Tax applicable in Florida!

05/24/2026

We are a CBFab dealer. Contact us now to place your orders. I just received notification of a price increase across the board on products. Get with us now for your inter coolers, down pipes and more. As always we offer free shipping in the Continental United States on products.

05/24/2026

Another new product line avaialable through StangPartsnMore. We are now Direct with Wilson Manifolds. Bad ass manifolds, throttle bodies, Nitrous and more. Get with us for Special Oricing options today.

05/24/2026

Who needs UPR parts? Drain plugs, Catch Cans, billet components, Suspension pieces and more. We are a dealer for over 20 years. Contact us directly for best pricing.

05/24/2026

05/19/2026

NEW UPR Godzilla 7.3 Engine Swap Adjustable Motor Mount Kit(fits 79-04 Mustang)

UPR Adjustable Urethane Godzilla 7.3 Swap Motor Mounts for 1979-2004 Ford Mustangs equipped with a UPR 4.6 96-04 K-member. These all new motor mounts allow for 1/4" height adjustments for a total of 3/4" adjustment to fine tune your oil pan, steering rack or hood clearance issues commonly found with engine swaps. The adjustable plates also have 7/8" of front to back adjustment. Utilizes Energy Suspension Urethane Bushings available in 2 different durometers for Street (70 durometer) and Street/Strip (88 durometer) they are fully serviceable. No longer will you have to replace the entire mount when the bushings wear out or have to buy a new set of motor mounts if you wish to change bushings. The base mount is made from 1/4" Mild Steel and silver powdercoated for a durable finish. All hardware is stainless steel or zinc plated. Great for use on any high performance application or just to make sure your car drive smoother and react better.

Works with American Racing UPR specific Godzilla swap headers.

Installs in 30 minutes or less. Includes 2 short and 2 long stainless steel motor mount studs that are interchangeable depending how many spacers used in height adjustment.

Product Features:
» Precision Laser Cut
» 1/4" Thick Mild Steel
» Fits 4.6 96-04 K-members
» Chrome Silver Powdercoated Finish
» Stainless Steel Motor Mount Stud
» Engine can be lowered 1/4" or raised 1/2"
» Replaceable Energy Suspension Bushings
» Street Bushing(70 durometer)/Street-Strip Bushing (88 durometer)
» Available Street or Street/Strip Bushings
» Includes mounting Hardware to Block

Fits These Vehicles:
1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 V8 V6 4cyl GT GTS Cobra Mustang Roush & Saleen Vehicles, with 96-04 4.6 K-Member

Sku(s):
3013-34 (Street 70 durometer)
3013-35 (Street/Strip 88 durometer)

Retail $199.99 shipped in the Continental United States

Sales tax is 7% in the state of Florida

Contact us now for best possible pricing guaranteed.