Dialed In Motorsports

Dialed In Motorsports ECU Tuning, Wiring and Performance Electronics Installations in the Tulsa/Broken Arrow OK area.

07/11/2026

6.0 1/8mi Golf R ✅

Team MEC PAPI / EuroHouse 🥳

Finishing off the week with a custom-order SL8 PnP Subaru STI kit for * Plug And Play 2014 STI Harness Adapter* Plug a...
05/08/2026

Finishing off the week with a custom-order SL8 PnP Subaru STI kit for

* Plug And Play 2014 STI Harness Adapter
* Plug and Play TGV to Boost Pressure (TMF) and Fuel Pressure
* 150psig Fuel Pressure sensor
* 100psia Boost Pressure MAP sensor
* Front O2 to Wideband Controller (ELC1) with appropriate CAN Termination
* Rear O2 to Flex
* ECU Mounting Bracket

If you’re ready to take the next step on your Subaru build, our Plug and Play kits simplify the installation of EMtron ECUs for everything including ECU and additional sensors. No additional wiring required. This is motorsports-grade engine management made easy.

We have Shadow8 and KV8 kits ready to order on our website, www.DialedInMotorsports.net but you can also inquire about custom kits.

In for the next few weeks for some custom engineering and wiring work is this Java Black Pearl 2004 Subaru WRX STI that ...
05/07/2026

In for the next few weeks for some custom engineering and wiring work is this Java Black Pearl 2004 Subaru WRX STI that has been 4EAT-swapped per the customer’s request.

This project is in collaboration with It has their custom high-mount rotated turbo kit with a G30 turbo.

We plan to do full standalone ECU with transmission control integrated within the ECU. We’ll share more details and specs later, but we’re excited to take on a unique challenge where drivability and comfort come first, followed by a modest amount of performance per the customer’s request.

No project is too big or small.

Looking for some of the best, and easy-to-install engine management in the industry for your Subaru? Our Level 2 and Le...
05/05/2026

Looking for some of the best, and easy-to-install engine management in the industry for your Subaru? Our Level 2 and Level 5 kits offer the best bang for your buck in top-shelf motorsports-grade hardware. They are easy to install and allow you to extract every ounce of performance from your Subaru for drag, time attack, and other high-performance applications.

We include critical sensors and their necessary harnesses which connect to some of your existing factory connectors for ease of installation.

Full CANBus is supported with Factory SI-Drive and DCCD Control, with direct-to-ECU DCCD control optional.

No need to source sensors, harnesses and ECU from different vendors; you get it all inside one box.

Shoot us a message or e-mail ([email protected]) if you want to learn more.

05/02/2026

Overview of a KV8 Plug and Play kits by Dialed In Motorsports. This is a hybrid between our Level 2 and Level 5 kit that is special-ordered by Graham @ BPT for one of his customers.

We visited to begin the project of bringing this legend of the Subaru community back to life. Coined “Sonic” by its pre...
05/01/2026

We visited to begin the project of bringing this legend of the Subaru community back to life. Coined “Sonic” by its previous owner, it’s gotta go fast.

In the past, this was an 8-second drag car. Its new owner, Marcus, brought it down to Rick & his team at DRP in Green Cove Springs, Florida with the goal of achieving those 8-second passes again. Rick and his team are no strangers to 8-second Subarus, as their old drag car Patriot was consistently in the mid-8s.

I was tasked with the wiring & electronics package. After sitting down and coming up with a plan with the team, I believe we have a really solid plan and will be using some of the best gear on the market to meet and exceed Marcus’ expectations and aspirations.

Over the next couple of months we will be working on this alongside the rest of the projects we have in-house and abroad. I’m very grateful to have a busy summer.

We’ll be closed while traveling for work from 4/28 to 4/30 and return in 4/31 . Responses will be delayed.
04/28/2026

We’ll be closed while traveling for work from 4/28 to 4/30 and return in 4/31 . Responses will be delayed.

It's no secret that we utilize OEM connectors in some of our products, but they don't have to be an eyesore. We make cus...
04/24/2026

It's no secret that we utilize OEM connectors in some of our products, but they don't have to be an eyesore. We make custom backshells for many of the OEM Connectors we use. Here are three examples we've made that go in some of our Subaru Plug and Play kits:

* TGV(left) to Triple Sensor Harness
* Rear O2(middle) to Flex Fuel harness
* MAF (right)Harness

You get better looking harnesses that are also better protected than without the backshells. We believe it's small details like these that add up to make a big difference.

Address

501-F N Redbud Avenue
Manhattan, KS
47012

Opening Hours

Monday 9am - 6pm
Tuesday 9am - 6pm
Wednesday 9am - 6pm
Thursday 9am - 6pm
Friday 9am - 6pm
Saturday 11am - 3pm
Sunday 11am - 2pm

Website

Alerts

Be the first to know and let us send you an email when Dialed In Motorsports posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share