Angelucci Performance

Angelucci Performance Stock to High Performance Machine work & fabricating,welding
CNC Machining of parts

512 tall deck 4 bolt Big Block Chevy.4.375 bore. Eagle crankshaft internal balanced.Child's & Albert Aluminum rods, an...
03/17/2025

512 tall deck 4 bolt Big Block Chevy.
4.375 bore.
Eagle crankshaft internal balanced.
Child's & Albert Aluminum rods, and pistons
Zero gap rings, Engine pro, rod and main Bearings
Fresh line hone Arp main studs with 3 new center steel main caps installed.
Parrelled decks, bored and honed with torque plates
polished lifter valley with screens.
Brass freeze plug kit.
Milodon oil galley plugs.

2300 SOHC Ford Fully ported and polished ports and chambers, Bronze guides.Manley stainless valves.Harden exhaust seats....
02/19/2025

2300 SOHC Ford
Fully ported and polished ports and chambers,
Bronze guides.
Manley stainless valves.
Harden exhaust seats.010 machined from deck surface.
Hydraulic roller cam,lifters,springs,retainers,
Valve locks.

420 CI Ford SB FMS Boss 4 bolt blockMolnar crank and rods.Diamond pistons & RingsMilodon oil system, cloyes chain set,...
12/12/2024

420 CI Ford SB FMS Boss 4 bolt block
Molnar crank and rods.
Diamond pistons & Rings
Milodon oil system, cloyes chain set,
Dart pro one cnc ported 330 cfm at .800 lift
Shaft style rocker arms. 3/8 trendi pushrods
Isky solid roller and lifters
springs titanium retainers and locks
Ferrea one piece stainless valves
ACL bearings cometic gaskets.
Open plenum intake.

Block was bored and honed,with torque plates.
Line honeed, was checked.
Assembly balanced internal. Decks were parrelled
Heads- 5 angle valve job
Oil system primed and ready.for customer to pick it up.

347 CI S.B.F .OEM block cylinders were bored/ honed with torque plates mains are lined honed with ARP studs Parrelled ...
12/12/2024

347 CI S.B.F .OEM block cylinders were bored/ honed with torque plates
mains are lined honed with ARP studs
Parrelled decks. Internal balanced assembly, Block clearance for stroker.

Eagle crank & rods. Fms roller cam,
Mahle forged pistons, Moly rings.
Clevite bearings, cloyes chain set.
Dart heads 2.02/1.6 stainless valves.
Hyd roller springs, moly retainers& locks.

427 S.B.C. Dart block & Heads, Molnar Crank & rods, Diamond pistons & Rings. Isky is the Whole roller valve train,Sta...
12/10/2024

427 S.B.C. Dart block & Heads, Molnar Crank & rods, Diamond pistons & Rings.
Isky is the Whole roller valve train,
Stainless valves, harlen sharp rockers, Dart studs girdle, moroso 8 qt pan, melling billit oil pump, ACL rod & main bearings cloyes chain & cover, cometic gaskets. Arp studs,

Block honed with torque plates, decked parrell, panrail clearance for stroker,
Full race port on heads, over 300 CFM.
Assembly balanced, with ATI super damper
And flex plate.

1966 Ford 289 heads, machined for screw in studs, harden exhaust seats, bronze guides, surface decked .010, 5 angl...
12/10/2024

1966 Ford 289 heads, machined for screw in studs, harden exhaust seats, bronze guides, surface decked .010, 5 angle valve job, stainless one piece valves, guides machined for.530 seals, mr gasket rocker studs, Isky springs, spring locators, retainers,locks and seals.

10/07/2024

Machining Mallory metal in a molnar stroker crankshaft, (internal balance)

2009, 3 valve. 4.6 Ford stroker, Diamond pistons and rings, Molnar crankshaft and rods, King bearings,Cometic head gas...
10/04/2024

2009, 3 valve. 4.6 Ford stroker, Diamond pistons and rings, Molnar crankshaft and rods, King bearings,Cometic head gaskets,Arp main and head studs,
Block was honed with torque plates,Deck was machined parrelled
Front of the block was machined for the 8mm pivot pins,Assembly was balanced, Mallory metal installed.line honed. Heads, Manley valve train. Comp cams camshafts, Bronze guides, 5 angle valve job, surface decked .005. Cam towers line honed.

1967 4.6 Buick Rover Aluminum block.. Installed 8 Darton sleeves, parrelled the deck,honed with torque plates, line hon...
10/04/2024

1967 4.6 Buick Rover Aluminum block.. Installed 8 Darton sleeves, parrelled the deck,honed with torque plates, line honed with Arp studs

1992 302 Ford Bored and honed with torque plates +030 Deck surface were parrelled. Rotating Assembly balanced. Li...
07/30/2024

1992 302 Ford Bored and honed with torque plates +030 Deck surface were parrelled. Rotating Assembly balanced.
Line honed mains with arp bolts.

Eagle crank and rods, SRP forged pistons clevite bearings, fluid damper with a hayes steel flywheel, Ford motorsport roller camshaft, roller chain set.
GT40 heads with a 5 angle valve job, solid bronze guides, surfaces decked, Manley stainless valves, Iskenderian springs retainers and locks

1964 390 ford FE. block was parrelled, cylinders were bored and honed with torque plates 040 over, whole rotating asse...
07/29/2024

1964 390 ford FE. block was parrelled, cylinders were bored and honed with torque plates 040 over, whole rotating assembly balanced, connecting rods reconditioned with Arp bolts, and new pin bushings crankshaft ground, Iskenderian hydraulic camshaft, double roller chain.
Heads have a 5 angle valve job, harden exhaust seats, bronze guides, stainless Valves, iskenderian springs,retainers and locks. New adjustable rocker arms and shafts.

Address

48360 Romeo Plank Road
Macomb Township, MI
48044

Opening Hours

Monday 9am - 8pm
Tuesday 9am - 6pm
Wednesday 9am - 6pm
Thursday 9am - 8pm
Friday 9am - 5pm
Saturday 9am - 9pm
Sunday 10am - 6pm

Telephone

+15864128442

Website

Alerts

Be the first to know and let us send you an email when Angelucci Performance posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category