TBCWorks

11/20/2025

‘67 Chevelle Mini tub, frame work, using ABC Performance kit. Powered coating done locally by Joe Korzue (Rear end wasn’t in the best shape, had some pitting, but with the smooth new brackets, it look pretty cool, almost hammered looking) 3” Stainless exhaust being done as well.

09/29/2024

Unfortunately the roof was sprayed with white paint, previous to me getting the car. So I sanded it down, to lessen the look, which looked like an eye sore. The original color of the roof, is 510 India Ivory, the lower is 503 Horizon Blue. Being the body is so rust free, with only minor surface rust, I may at some point strip, and re-paint it back original 🤷🏻‍♂️ Still waiting on the 406ci to be finished on the machine work, then I’ll mate it up to the 4L60e trans, ‘69 Camaro rearend, and new wiring harness is the overall plan.

09/29/2024

Before and after pics of Brian’s ‘52 Chevy. Modified the front lower control arms, with a 3” kickup, and cut some 2x3x1/4 for the rear lowering blocks.

12/24/2023

11/09/2023

I just found out tonight, that the local dealerships charge like around 175hr! I mean, for switching a part out. So as of tomorrow, I’ll be raising my labor rate to $200hr!!!! So if y’all can pay a big business to swap out a part, for $175hr! You can gladly support a local small shop, for designing, cutting, welding a custom part, that you can’t buy for $200hr! You can thank any of your local dealerships for this new labor rate….. 🤷🏻‍♂️😘

11/06/2023

Just to let everyone know, Austin Ratley is going full time wiring! Way overdue if you ask me, but it’s a high demand type of work, so expect to be willing to pay for the quality of work, that he’ll be offering! He’s good at it, has a great attitude, and has a family to take care of!!! Your welcome, Tim

Drag Wire Solutions is a race car oriented business that specializes in Holley and Fueltech wiring.

10/10/2023

Got some great customers, Thank Y’all!

10/03/2023

At any given time, there are 10/12 projects staring at me everyday… With only part time help, it’s always a time issue, in getting work out the door quick enough for everyone. I’d love to hire a couple of hot rod like minded people (who don’t ask questions every minute, about what to do) *I’m not wanting to apprentice anyone, nor hold your hand*

Skills I’m looking for…
*Tig welding!
*Mig welding!
*Sheet metal fabrication!
*Chassis fabrication!
*Lathe/Milling experience!
*Race car/hot rod fabrication!
*Attention to detail!
*Good-Great attitude is a must!
*Common sense helps!
*Non smoker preferred!
*Passion for the industry really helps!
If you’d like to email me a resume ([email protected]) I’ll be glad to look it over.
Pay (1099) will be based on your skill level, and which I’ll try you out for a week, to see if your resume matches your skill!

P.S.
Please don’t waste my time, nor your time, if you don’t have what it takes!

Thanks Tim Bradham

08/08/2023

Never know what’s hanging around the shop. About finished on the ‘30 for Freddy Torres, and a little harness bar adjustment on Stanley L Kinnison coolio Willys truck, along with bending up a aluminum radiator shroud. Yeah, Hot Rodding is in my blood, so deep, when cut, I bleed oil it seems.