Xens Garage

Xens Garage Collision, restoration, resto mods one stop shop. Insurance claims welcome!

Got this one squared away and headed back home. Had to cut pan hard bar down half an inch so it would no longer pull rea...
07/21/2026

Got this one squared away and headed back home. Had to cut pan hard bar down half an inch so it would no longer pull rear diff to passenger side, also have it laying lower with some new shorter shocks underneath. Finished it up by narrowing 2 inches overall so wheels tuck nicely up underneath.

Another blessed and busy week inside the shop. Got some paint on the cutlass frame after we finished up rear/front frame...
07/01/2026

Another blessed and busy week inside the shop. Got some paint on the cutlass frame after we finished up rear/front frame notches to clear the 26s, had to rotate the axle tubes back 30 degrees, and now time to get it a roller again. Had another obs dropped off for a narrowed rear end so it can sit lower on its air setup. 66 impala dropped off to get some stopping power behind that 454 tucked in and miscellaneous wiring issues to work out!

Received our last part in, now we can start disassembly. Let’s get this rowdy vette upgraded to match the blueprint 500h...
06/11/2026

Received our last part in, now we can start disassembly. Let’s get this rowdy vette upgraded to match the blueprint 500hp small block. Dewitt’s radiator with brushless fan combo, cvf polished serpentine kit, dynamic corvettes xl l88 hood, aci front bumper and then we will finish it off by refinishing front clip!

Apache dropped off for an ifs front kit from cpp. After notching front frame rails to clear tie rods, knocking out rivet...
06/11/2026

Apache dropped off for an ifs front kit from cpp. After notching front frame rails to clear tie rods, knocking out rivets and adding rack extender this one is ready to head home for its engine swap!

Another busy and blessed week in the shop! We’re pushing multiple projects forward.🛠️ The C3 received some parts, and we...
05/15/2026

Another busy and blessed week in the shop! We’re pushing multiple projects forward.

🛠️ The C3 received some parts, and we’re just waiting on a few more items before we dive in.

🔧 The Caprice body-swapped Apache had its front clip reunited after some frame horn adjustments and minor cutting. It’ll be settled in place for good soon.

🔩 The ‘50 Chevy had some minor welding on the bed finished up and is now ready for bodywork.

⚙️ The ‘80 Cutlass frame is finally all notched up for the 26s! Time to grind it down, then it’s ready for paint so we can make it a rolling chassis again.

🚗 The ‘16 Subi is headed home after collision and rust repair from those frigid East Coast winters

04/27/2026

Customer came in for a routine oil sensor and oil pump replacement. Thanks to the bds lift kit and their engineers this job took a few days longer than normal. Thanks for our customer being patient we were able to get him back on the road!

Quick update on the 90-96 b-body frame swap for the 57 Apache. Got the bed and cab sitting where we like, just needs a l...
04/22/2026

Quick update on the 90-96 b-body frame swap for the 57 Apache. Got the bed and cab sitting where we like, just needs a little more trimming and then we can start mounting the front clip on and make our cab body mounts.

C3 vette in for some goodies, fiberglass repair and some fresh paint!
04/22/2026

C3 vette in for some goodies, fiberglass repair and some fresh paint!

Finally got this Durango back road worthy. What seemed to be a simple fender bender snowballed into a whole lot of unsee...
04/21/2026

Finally got this Durango back road worthy. What seemed to be a simple fender bender snowballed into a whole lot of unseen damage. Looking good as new!

Address

8600 Ash Avenue, Unit C1
Lubbock, TX
79404

Opening Hours

Monday 9am - 6pm
Tuesday 9am - 6pm
Wednesday 9am - 6pm
Thursday 9am - 6pm
Friday 9am - 3pm

Telephone

+18063002000

Website

Alerts

Be the first to know and let us send you an email when Xens Garage posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category