Fine-Spec Works

Fine-Spec Works shop dedicated to quality work. Servicing all the so-cal drift/s-chassis community and car enthusiasts.

Stayin busy ..
09/26/2023

Stayin busy ..

06/16/2019

Didn’t get a chance to post the close to finished interior of our personal track machine on here so here it is... Thoughts on the result so far?

This s14 will be getting some air.. we,ll be installing this  suspension which should make this thing so much easier to ...
06/15/2019

This s14 will be getting some air.. we,ll be installing this suspension which should make this thing so much easier to drive and avoid breaking the body kit or damaging anything due to low ride height..

We been hard at work trying to get out personal track machine done, a lot of the cage work is done but there’s still qui...
06/15/2019

We been hard at work trying to get out personal track machine done, a lot of the cage work is done but there’s still quite a bit of work to finish...

Getting the cooling system ready for the 1js14, -20an fittings welded for stainless steel hoses along with a pair of Fal...
04/09/2019

Getting the cooling system ready for the 1js14, -20an fittings welded for stainless steel hoses along with a pair of Fal fans should keep this thing cool..

Interior floor finish is done... don’t know how I feel about it, I haven’t seen it or done it on a complete interior are...
04/09/2019

Interior floor finish is done... don’t know how I feel about it, I haven’t seen it or done it on a complete interior area but it’s done.

Camaro in for another upgrade. We’ll be converting this to a rack & pinion steering system and getting rid of the old st...
09/05/2018

Camaro in for another upgrade. We’ll be converting this to a rack & pinion steering system and getting rid of the old steering box.
With this setup we’ll be getting rid of all the play on the steering and get much better feel for steering while driving.

Another clutch upgrade, this time on this Evo x.. old stock clutch couldn’t hold up the extra ponies this thing makes so...
08/19/2018

Another clutch upgrade, this time on this Evo x.. old stock clutch couldn’t hold up the extra ponies this thing makes so we upgraded this to an Ironman kit from along with a new chromoly flywheel.

370 in for some clutch issues, the problem was a blown slave. We replaced it and while we were at it hooked em up with a...
08/16/2018

370 in for some clutch issues, the problem was a blown slave. We replaced it and while we were at it hooked em up with a new clutch kit from .. car is all back together and back on the road.

Had to put some work on our personal car this passed weekend. Transmission finally gave out on our 335i so we got a repl...
08/16/2018

Had to put some work on our personal car this passed weekend. Transmission finally gave out on our 335i so we got a replacement to swap it out and we’re back on the road shifting gears with no problems.💯🏁

Address

8110 Eastern Avenue
Long Beach, CA
90201

Alerts

Be the first to know and let us send you an email when Fine-Spec Works posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share