Driven Desire

09/06/2022

Some shots of our V6 retirement program. If your V6 or 4cyl is nearing the end of its working age and you would like to revive a perfectly good chassis with a V8 VK56 we can help, DIY or in house!

05/07/2022

It’s ready, the first 2nd gen swap is complete! 5.6L Directed Injected 400hp 420 ftlbs 7 speed 4x4!

02/08/2022

Freshly ready to take on the snow. Who’s next?

01/27/2021

In collaboration with , we are excited to announce that we now offer the most complete VK56DE/VK56VD/VK50VE to VQ35DE/VQ35HR/VQ37VHR 6 speed manual transmission adapter on the market! Now you can easily mate any CD/JK Nissan 6 speed manual transmission to the or . Retention of the crank angle sensor position sensor allows for use of the factory engine control module. Designed to be used with a flywheel and clutch kit, also comes with all necessary hardware. We also offer VK swap wiring services to make your swap plug and play!

12/19/2020

300k on the chassis, two blown later, this finally has what it should have had all along!

12/04/2020

We took delivery of a , plans for a new swap are underway. We have the recipe...

11/10/2020

450zx Loading...

11/03/2020

mornings with sound.

09/26/2020

All ...

07/18/2020

Still got some small kinks to iron out, but it sounds so good!

06/21/2020

What do you call a with a 4.5L ? Well it’s a mash up of mostly all off the shelf oem parts with very little fabrication from multiple and cars. We call it the and it should be a lot of fun!

05/04/2020

Yep that’s not going to shut....😆

05/01/2020

After some porting and some elongating of the bottom bolt holes, VK56VD Titan headers fit the VK45DE 😈

04/09/2020

They are probably going to be a pain to keep clean but we are loving the look of these in we rebuilt. Going to look great on our project

03/30/2020

A little of the interior of the 2006 . Full , 09+ Climate control and bezel swap. center console, steering controls , heated steering, pro-4x powered seats, paddle shifters, auto lights, fuel pressure, oil pressure, trans temp, vac/boost and wide band gauges. The mods list on this thing is crazy!

03/27/2020

On the home stretch with this ! With this should be a ! This one has a super long list! Some exciting new we will be sharing soon!

02/19/2020

Some slappyshifts to go with the on this for some .

02/16/2020

and swaps

01/28/2020

Not a in sight...

12/14/2019

Converting a 13+ wiring harness for . This is just one of the extra steps that have to be done for the 13+ and . We do this part for you as apart of our wiring service!

11/21/2019

Some of the we did some on. and on the !

11/12/2019

We to give you the most looking possible, even if that means you drive it right to the nearest mud hole after it leaves the shop!

11/10/2019

Our on the getting tuned . 385 whp 420ftlbs on 6 psi and stock internals. Not too shabby! Just sounds !

11/07/2019

We do all the things around here. If you thought the was cool we are just getting started, trust us you are going to want to hit that follow button.

11/06/2019

:Repost from : Under the hood of the 600whp Desert Runner Frontier. We built a custom turbo kit and had Carl of dial in the software to make Big torque numbers. makes the adapter plate and wiring service to facilitate the V8 engine which helped make the swap of this spec VK56 that much easier. On display at the booth in the south hall at through the week.

11/05/2019

Our transmission adapter and wiring service was used on this build. Pretty sweet truck!

https://usa.nissannews.com/en-US/releases/nissan-at-sema-2019-high-power-nismo-designed-performance-makeovers-take-the-spotlight

Nissan is bringing the heat to this year's SEMA (Specialty Equipment Market Association) Show with high-powered vehicles designed to blow performance enthusiasts' minds.

10/18/2019

It just looks like it belongs there.

10/05/2019

! This is sure to be a handful! with cams and headers and full exhaust, this thing is sure to !

10/04/2019

cluster with a of the readout and drive

09/28/2019

Got a little time in today to work on personal projects. True on the . Originally made for so had to modify it a bit to fit. We have future plans for this car as well as other Z/G cars! Follow us for updates!

09/14/2019

Installing the for the and doing a video.

09/07/2019

in this with less than ! ’s is going to be a !

08/08/2019

Two getting ready to under go changes! We got swaps , install, , , updates, install and the list goes on! Yes this includes the you keep asking for! (sorry we suck at social media content but we are trying!) Follow us on IG, FB and YouTube

07/23/2019

those swaps for !

06/19/2019

Doing a quick on a

05/15/2019

Full 2013 4x4 drop out for sale! 89k miles. This will come pre wired and will be plug and play. This is most compatible with 13+ Frontiers and Xterras. Message us for pricing!