Iveytune

01/23/2025

Gtr engine rebuild in progress. Have a line of these being done since last year.
#44

10/12/2024

Locking up late one night recently, I was there alone and happened to walk by and glance over at the dyno display. I had an immediate moment of clarity, the v10 project had finally broken the 2000hp barrier, though a little late, but in a very positive manner.
We as a team had managed every aspect of such a build, nothing was farmed out.
We did the engine management, the transaxle was built here, the engine was built and blueprinted here, and the turbo system having gone through at least 5 iterations was also fully designed and built here, we did not need an outside tuner to get the job done.
Now I say all that to emphasize this, not all these performance operations are the same. Some are quite successful, but have become more of a middleman/ service deal, not us. We have taken a lot of pride in the fact that our work is our work, not a pretense, yes it’s really built here within these walls. Call it being old school, but it’s great when you can make promises to a customer and have enough control that you have no need to make excuses.
We have a lot of technical knowledge built up over the years of doing many high power winning projects, we will continue the learning as we take this project to the strip to correlate the power figures to on track performance, we will check in with you later. And as always we thank our customers and customer operations for the support that allows us to move forward.

05/31/2024

12/21/2022

10/23/2022

10/20/2022

We have that working, well kinda ;-)

09/28/2022

Ecutek etune for in Ontario, Canadá.

08/03/2022

Many years into the , rebuilds, repairs, clutch upgrades etc etc etc

05/06/2022

Dl800 gearbox upgrades and repairs.

05/06/2022

Another Dl800 trans in for a full gearset and Promax clutch, our stage 5
;-) #☀︎

01/06/2022

High performance Mechanic/Technician needed (Linden/Elizabeth NJ)

High performance tuning, and mechanical repair facility requires a technician with the requisite experience.
The Technician should have experience with the following on either import or domestic platforms.
*Removal and replacement of engines, fwd/awd styles mostly but some RWD
*Clutch jobs installing high performance multiplate clutches
*Wiring for high performance applications, sensors, ecu systems, fuel pump relays etc.
*Assembly of engine short blocks or at least making a short block into a fully assembled engine.
*Rebuild of manual transmission assemblies.
*Should understand basic high perf setups, including turbocharger systems, superchargers, engine management, etc

Compensation is very competitive and will be based on experience and ability to carry out key tasks on the job.

Must be punctual and dedicated, above all else.

10/05/2021

upgraded 2nd gear for this Audi R8 plus. ;-)