Doran Designs

Doran Designs Specialized in suspension fabrication and LS based engine swaps
Based in Lincoln Ca. DM with all inquiries

We took this 4 runner to the next level with a custom front 3 link suspension with 14inch king 2.5 shocks and a set of 1...
04/19/2026

We took this 4 runner to the next level with a custom front 3 link suspension with 14inch king 2.5 shocks and a set of 1 ton axles we used a 05+ 60 front trussed with a barns low pro truss psc hydro assist and a 14bolt rear with 63 Chevy springs out back

Bringing Burt back to tie up some loose ends and correct some issues that have come about recently. ...
08/12/2023

Bringing Burt back to tie up some loose ends and correct some issues that have come about recently.

All wrapped up, not a huge job but one that completely changes the presence of the car.Currently accepting new customers...
08/02/2023

All wrapped up, not a huge job but one that completely changes the presence of the car.

Currently accepting new customers, DM me if you need anything done!

While working on the air suspension install, the customer asked to upgrade his front brakes as well. Ditched the front d...
08/02/2023

While working on the air suspension install, the customer asked to upgrade his front brakes as well. Ditched the front drums for pads and rotors, as well as the appropriate master cylinder.

Made a mounting platform to hold both tanks, both compressors and the airlift manifold. We were on a tight schedule for ...
08/02/2023

Made a mounting platform to hold both tanks, both compressors and the airlift manifold. We were on a tight schedule for this phase, so soft lines will do for now.

65 Cadillac going under the knife for an altitude adjustment.DM me for any inquiries.
08/02/2023

65 Cadillac going under the knife for an altitude adjustment.

DM me for any inquiries.

Officially on the road and running well!Cut down to a short bedLS swapped5/7 dropCustom trailing arms to convert from le...
09/02/2022

Officially on the road and running well!

Cut down to a short bed
LS swapped
5/7 drop
Custom trailing arms to convert from leaf springs
Dakota Digitals
Vintage Air
Custom taillight fuel filler
Long Tubes
Stainless exhaust

Ready for daily duty before it’s up for grabs.

Update on our module mount all final touches are done we will be selling these for $45 shipped to your door message us...
07/13/2022

Update on our module mount all final touches are done we will be selling these for $45 shipped to your door message us for details all hardware will be included.

New products coming this is our 67-72 Dakota digital module mount it bolts on to the cowl mount ing bolt for the brake p...
07/10/2022

New products coming this is our 67-72 Dakota digital module mount it bolts on to the cowl mount ing bolt for the brake pedal assembly.

The first Doran designs tailing arm kit for the 67-72 c10 trucks are in development now it will be offered in a complete...
03/06/2022

The first Doran designs tailing arm kit for the 67-72 c10 trucks are in development now it will be offered in a complete kit form it has a two inch drop built in to the arms welding will be required at first at a reduced price. This set up is going on our 70 gmc that was originally a leaf spring equipped truck.

Address

Lincoln, CA

Website

Alerts

Be the first to know and let us send you an email when Doran Designs posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category