DW Detailing and Design

10/14/2026

Full titanium wrapped corvette exhaust! We offer this service for any car/ truck, street or race car alike. This exhaust was custom made by us and ceramic coated before being fully wrapped in DEI high temp titanium. This will offer extreme reduction in surround temps and increase the exhaust gas speed by keeping it hot🥵

10/12/2026

The custom Corvette X H pipe has been fully fabricated welded and ceramic coated. This offers a truly unique exhaust tone that has low end rumble and clean high end rpm performance. Custom fabrication and coatings start at $100

10/08/2026

10/08/2026

Custom X H pipe is under way, this is the inner sleeve that was made to join the 2 sections together and add some strength, all the work we do is meant to last and a bit over kill but it’s well worth it in the long run. Custom fabrication starts at $100 / HR. We are efficient and get works done quick. Most jobs are same day.

10/06/2026

We installed a new transmission cable, sound deadening, stiffer trans tunnel plate and heat resistant aluminum shielding on this 30K miles C5 corvette, next up is custom exhaust and titanium wrapped and ceramic coated pipe. All work starts at $100 an HR. We offer custom solutions and fabrication for any project. Corvette

10/02/2026

Everything on this truck was done in house, we offer custom paint, coating, ceramic coating, custom wiring, custom fabrication, design and much more. Contact us today to get scheduled. Rates start at $100 HR

10/01/2026

Rates start at $100 /HR today we are installing a full lift and brand new suspension aswell as steering stabilizer on this 2024 ram 2500 contact today to get scheduled for work 🤘🏼

09/30/2026

Rates starting at $100 / HR 🚗 we removed the decals on this 30K mile c5 corvette and buffed and paint corrected the hood, you would never be able to tell this car had previous rally strips! We can also install decals and rally strips, these ones here were becoming sun faded and needed to be removed.

09/29/2026

We are fabricating and building a custom X -H pipe on this 30K miles C5 corvette. We wanted to do something different to show off our fabrication skills and offer a truly unique sound that can’t not be replicated by online exhaust system. We can achieve a completely 1 of 1 sound by custom fabrication every section of the exhaust. Our rates start at $100 / HR.

09/28/2026

We installed lowering bolts and metal upgraded sway bar end links on this C5 corvette with only 30K miles. We specialize in high performance automotive repairs and upgraded and offer custom fabrication and design. Work starts at $100 /HR