Blasted & Baked Powder Coating aka: Custom Coat

Blasted & Baked Powder Coating aka: Custom Coat Why Should I Powder Coat...? Powder coating is also thicker (3-4 mm) than typical paint coatings (1-2 mm). You can't do that with paint! What is Powder Coating??

(and not paint!)


Superior Finish
Chip Resistance
Thicker Coating
Durability
Chemical Resistance
Environmental Safe
For about the same cost as professionally applied painting, Powder Coating offers superior finishes, combined with excellent durability, which reduces maintenance cost (re-cleaning & repainting) and extends the life of the item and is particularly beneficial for parts expo

sed to harsher conditions such as moisture and chemicals. Unlimited color availability and color matching gives you more color choices than a rainbow. And with a second coating of semi gloss to high gloss "clear powder", not only can help to slow UV fading and acid rain effects, but the clear coat also works great on polished parts to eliminate constant polishing! For industrial applications a base coat of zinc rich primer can provide a additional protection from corrosion. Powder coating is versatile and can be used on springs without cracking. Powder Coating sounds "high tech" and "futuristic", but actually it is very simple and has been around for about 50 years. When a formulation was developed for finely ground "plastic" powder, the powder coating industry began. After sandblasting the part to a bare metal surface, a special electrostatic spray gun, with 30,000 to 90,000 volts, is used to apply a thin layer of "plastic" powder onto the surface of the part to be coated. The powder is held onto the part by static electricity. Once coated, the parts are oven baked at 375 degrees Fahrenheit. The oven cures the dry powder to a "gel state" and then further curing causes this gel to harden into a very tough "plastic" coating. This flowing and fusing of the coating in the final curing oven creates a continuous coating, which is very hard and has no porosity. Because Powder Coating does not use solvents, there are no toxic chemicals released into the air, thus EPA regulations do not add expense to this process. Powder Coating technology offers the consumer an alternative to liquid coatings that is economical, efficient, and environmentally friendly. It produces a high quality finish and is available in a broad range of colors, glosses, and finish textures (smooth, wrinkle, hammer tone, antique, & clear coats).

05/14/2026
04/30/2026
HEY! HEY! HEY! If you know someone looking to work with us goofballs, we are adding to our team (one of our team member...
02/03/2026

HEY! HEY! HEY!
If you know someone looking to work with us goofballs, we are adding to our team (one of our team members is moving away)
Fast paced Powder Coat shop, CRAZY fun & it's only 4 days a week!! Monday-Thursday, Medical, IRA, Paid Vacation &
Paid Holidays (paid holidays do not include Valentines Day, Halloween or St Patrick's Day😂) Please share & have them contact Kynda @ 2905 Clearwater Ave. Lewiston or Private Message.

01/15/2026
Have a Merry Christmas & Happy New Year!
12/15/2025

Have a Merry Christmas & Happy New Year!

👏
12/09/2025

👏

❄️The 2026 season is just a few short weeks away. No better time to fresh’n up your steed than the holidays!🎄

Blasted & Baked Powder Coating aka: Custom Coat

We will be closed July 2nd thru July 6th. Have a great 4th!🇺🇲
07/02/2025

We will be closed July 2nd thru July 6th. Have a great 4th!🇺🇲

12/16/2024

🎄WE WILL BE CLOSED🎄
December 23rd thru January 5th
Have a Merry Christmas

05/02/2023

We encourage all people and businesses to buy LOCAL whenever possible. These community businesses are the ones that are giving back by donating and sponsoring various community activities and organizations. Gateway Materials appreciates each customer that chooses us as their vendor, and we appreciate the great community that we are surrounded by!

Address

2905 Clearwater Avenue
Lewiston, ID
83501

Opening Hours

Monday 7am - 4pm
Tuesday 7am - 4pm
Wednesday 7am - 4pm
Thursday 7am - 4pm

Telephone

(208) 746-4105

Website

Alerts

Be the first to know and let us send you an email when Blasted & Baked Powder Coating aka: Custom Coat posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Blasted & Baked Powder Coating aka: Custom Coat:

Shortcuts

Share