Adkins Automotive

Adkins Automotive inspections. Towing

ASE Master Technician,ATRA Master Technician,General Motors certified line technician.We do all major/minor repairs on all makes and models of vehicles.Engine repair, Brakes,Transmissions,Steering and suspension,Electrical .N.C.

2002 f450 zf6 transmission had to have bearings replaced. Main shaft bearing in intermediate support was bad
08/19/2026

2002 f450 zf6 transmission had to have bearings replaced. Main shaft bearing in intermediate support was bad

High volume oil pump and oil valve replacement on a 2003 Silverado
08/05/2026

High volume oil pump and oil valve replacement on a 2003 Silverado

2001 infinity qx4 with a bad intake hose stuck iac valve. Causing high idle and surging issues. 2002 Camry with a leakin...
07/22/2026

2001 infinity qx4 with a bad intake hose stuck iac valve. Causing high idle and surging issues. 2002 Camry with a leaking valve cover gasket and a leaking flex pipe. Change gasket and welded a new flex pipe in

1992 Chevy lumina with a no-start from a bad crank sensor. Clean car for an ole 1992. 2004 avalanche with 2 inch levelin...
07/14/2026

1992 Chevy lumina with a no-start from a bad crank sensor. Clean car for an ole 1992. 2004 avalanche with 2 inch leveling keys installed

07/08/2026
2000 7.3 diesel had two cylinders with low compression and a bad IDM module setting codes for number 6 and 8 injectors. ...
07/08/2026

2000 7.3 diesel had two cylinders with low compression and a bad IDM module setting codes for number 6 and 8 injectors. Replaced engine with a 2002 model and swapped over all components and then replaced the idm module with a new one. Runs great now

A/c service with dye on a 2000 s10 and a tune up on a 2014 Nissan maxima
06/11/2026

A/c service with dye on a 2000 s10 and a tune up on a 2014 Nissan maxima

2005 Tacoma with a a750f transmission- 5 speed automatic. Had no reverse and wanted to pull forward in reverse. The brak...
06/02/2026

2005 Tacoma with a a750f transmission- 5 speed automatic. Had no reverse and wanted to pull forward in reverse. The brake 1 clutches was smoked and the forward clutches were welded together. The brake 1 clutch is used for reverse. Had to grind the wore in ridges from the b1 clutch hub to allow the clutches to freely slide

05/20/2026

Address

3363 Playmore Beach Road
Lenoir, NC
28645

Website

Alerts

Be the first to know and let us send you an email when Adkins Automotive posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Adkins Automotive:

Shortcuts

Share

Category