Boneyard Builds

Boneyard Builds Specialize in Hotrods and muscle cars. Restorations, paint and body, metal fab, interior, and motor work. We also buy and sell. What can we build for you?

Happy birthday, Merica’! 🇺🇸🏁
07/04/2019

Happy birthday, Merica’! 🇺🇸🏁

Today we got to meet Charley Ava for the first time. She made her debut at 7:08 this morning and weighed 9lbs 7oz. Mama ...
07/04/2019

Today we got to meet Charley Ava for the first time. She made her debut at 7:08 this morning and weighed 9lbs 7oz. Mama and baby are both doing great. Thanks to everyone for the calls and texts today, even if we haven’t had a chance to return or reply yet.

Turbo Tuesday. Lots of progress happening at Wehrli Custom Fabrication Inc. mocking up the plumbing on our Duramax C-10 ...
06/25/2019

Turbo Tuesday. Lots of progress happening at Wehrli Custom Fabrication Inc. mocking up the plumbing on our Duramax C-10 build. ☠️

Headed for the exhaust shop this morning with the 73’ Cuda’. ☠️ @ Boneyard Builds
06/25/2019

Headed for the exhaust shop this morning with the 73’ Cuda’. ☠️ @ Boneyard Builds

Metal Monday. We’re almost finished with this one-off close out panel for the 69’ Satellite engine bay. ☠️ @ Bon...
06/24/2019

Metal Monday. We’re almost finished with this one-off close out panel for the 69’ Satellite engine bay. ☠️ @ Boneyard Builds

The C-10 project is great hands at  Wehrli Custom Fabrication Inc. getting the twins situated.
06/18/2019

The C-10 project is great hands at Wehrli Custom Fabrication Inc. getting the twins situated.

Look what just rolled into the shop to get one of our custom twin turbo treatments. How would you finish it?

Owner: Brody Stone
Follow: Boneyard Builds

#wcfab #wehrlicustomfab #c10 #duramax #roadstershop #rotiform #nitto #RAPTORized #borgwarner #twinturbo #turbotuesday #lswhat #manpedal

06/12/2019

Got the Bronco’s 351 to fire today. She sounds pretty healthy for tune. ☠️🔥

Tom’s GTO is headed home for glass, trim, and the nose. ☠️ Forgestar Pro-Touring.com
06/05/2019

Tom’s GTO is headed home for glass, trim, and the nose. ☠️

Forgestar
Pro-Touring.com

First shot at snake skin on a set of tins for a 76’ Shovelhead today. Pretty pleased with the finished product. ☠️...
06/03/2019

First shot at snake skin on a set of tins for a 76’ Shovelhead today. Pretty pleased with the finished product. ☠️🐍

We’re getting Front-End Friday started with more mock up on the Diesel C-10.☠️ #coaldigger
05/31/2019

We’re getting Front-End Friday started with more mock up on the Diesel C-10.☠️ #coaldigger

Vini's Hot Rods
05/30/2019

Vini's Hot Rods

We are looking for auto body men and hot rod metal shapers/ fabricators. Must have experience in the automotive industry. **We are not looking for pipe fitters, welders or general fabricators** please give us a call or email us your resume. #vinishotrods

The Roadster Shop chassis is back from powder coat and moving along nicely. Got our driveline, cab, and bed set in place...
05/29/2019

The Roadster Shop chassis is back from powder coat and moving along nicely. Got our driveline, cab, and bed set in place for final mock-up.☠️
Rotiform
Nitto Tire USA

Got our C-10 body sprayed with Raptorliner bedliners llc and ready to go back onto the Roadster Shop chassis for final f...
05/27/2019

Got our C-10 body sprayed with Raptorliner bedliners llc and ready to go back onto the Roadster Shop chassis for final fitment before paint. ☠️

Tailgate Tuesday. More assembly progress on our 77’ Bronco project. ☠️
05/21/2019

Tailgate Tuesday. More assembly progress on our 77’ Bronco project. ☠️

We got to bring some hardware back from Cruisin’ the Creek Bank. ☠️
05/18/2019

We got to bring some hardware back from Cruisin’ the Creek Bank. ☠️

Dropped the front of the shop car about an inch tonight, added a bigger fan, and ran around it with a polisher. Ready fo...
05/18/2019

Dropped the front of the shop car about an inch tonight, added a bigger fan, and ran around it with a polisher. Ready for the 4th annual Cruisin’ the Creek Bank tomorrow. Come check us out. ☠️ @ Boneyard Builds

Knockin’ the texture out of this @kindigitdesign Black Hole Black. ☠️ @ Boneyard Builds
05/14/2019

Knockin’ the texture out of this @kindigitdesign Black Hole Black. ☠️ @ Boneyard Builds

Because every fork lift needs a beverage holder. ☠️🍺
05/12/2019

Because every fork lift needs a beverage holder. ☠️🍺

Today’s score from North Alabama. LS3 & 6 speed for our 67’ Firebird project. ☠️
05/11/2019

Today’s score from North Alabama. LS3 & 6 speed for our 67’ Firebird project. ☠️

05/11/2019

Late night at the office with some old school Eric Clapton by customer request. ☠️

05/10/2019

Really pleased with how this TA came together. ☠️

Firebird Friday. Getting this 78’ Trans Am ready to go home. ☠️
05/10/2019

Firebird Friday. Getting this 78’ Trans Am ready to go home. ☠️

Who doesn’t love a good lookin’ rear end? This Strange Engineering 9” sure does clean up nice. ☠️-#strange #9i...
05/04/2019

Who doesn’t love a good lookin’ rear end? This Strange Engineering 9” sure does clean up nice. ☠️
-
#strange #9inch #rearend #c10 #roadstershop #sikkens #details #supportyourlocalhotrodshop #boneyardbuilds

05/01/2019

Back from the transmission shop and ready for final prime. ☠️

04/30/2019

Got the first round of buffing knocked out on the 78’ TA. Pretty deep for silver...☠️

Gonna need more wheel....and a lot more tire. ☠️
04/26/2019

Gonna need more wheel....and a lot more tire. ☠️

All the Easter colors. ☠️🐣 @ Boneyard Builds
04/21/2019

All the Easter colors. ☠️🐣 @ Boneyard Builds

Fitment Friday with some pics of this weeks panel fitment. Satellite doors & front cap, Firebird quarter panel, Bronco d...
04/20/2019

Fitment Friday with some pics of this weeks panel fitment. Satellite doors & front cap, Firebird quarter panel, Bronco doors & front cap, and a C-10 door. ☠️ @ Boneyard Builds

Sunday’s are for satin. Adding a little more satin black to our Bronco build. ☠️
04/14/2019

Sunday’s are for satin. Adding a little more satin black to our Bronco build. ☠️

Another round of Bronco parts with pearl white tri coat and some satin black for contrast. ☠️
04/09/2019

Another round of Bronco parts with pearl white tri coat and some satin black for contrast. ☠️

Mht Wheels surpassed our expectations on these killer Rotiform wheels for our Duramax C-10 project. ☠️
04/07/2019

Mht Wheels surpassed our expectations on these killer Rotiform wheels for our Duramax C-10 project. ☠️

New stance for this 73’ Cuda’. 2” drop, subframe connectors, and undercoating. ☠️ @ Boneyard Builds
04/05/2019

New stance for this 73’ Cuda’. 2” drop, subframe connectors, and undercoating. ☠️ @ Boneyard Builds

Trans Am Tuesday. Making some more assembly progress on the 78’ TA. ☠️
04/03/2019

Trans Am Tuesday. Making some more assembly progress on the 78’ TA. ☠️

Mom took home some hardware yesterday at Martin Day put on by the Martin Fire Department. ☠️ @ Martin, Mississippi
03/31/2019

Mom took home some hardware yesterday at Martin Day put on by the Martin Fire Department. ☠️ @ Martin, Mississippi

Got our bumpers and trail doors back from Pablos Custom Powdercoating today. He did a killer textured black for us to co...
03/29/2019

Got our bumpers and trail doors back from Pablos Custom Powdercoating today. He did a killer textured black for us to contrast the white. ☠️

Kicked off the first car show of the season with the Miss Leeds Area Car Show. Great turn out with over 200 cars. ☠️...
03/23/2019

Kicked off the first car show of the season with the Miss Leeds Area Car Show. Great turn out with over 200 cars. ☠️☀️ @ The Outlet Shops of Grand River

Facelift Friday. We did a quick grille swap on this good lookin’ 66’ C-10.☠️
03/22/2019

Facelift Friday. We did a quick grille swap on this good lookin’ 66’ C-10.☠️

03/14/2019

Our Bronco tub is ready for final assembly. The contrast of the Raptor Liner and the pearl white tri-coat looks killer.☠️

03/13/2019

Finally got the last round sprayed on the Bronco tub. Looong Tuesday. ☠️

Kicking off Front-End Friday with some bumper fitment. Getting our @velocityrestorations bumpers mocked up and welded.
03/08/2019

Kicking off Front-End Friday with some bumper fitment. Getting our @velocityrestorations bumpers mocked up and welded.

03/06/2019

Got our Holley Performance Products exhaust cut outs installed on the 69’ Satellite project. So much louder in person. ☠️

Friday Night Lights...☠️
02/23/2019

Friday Night Lights...☠️

Firewall Friday. We finished up the metal work on our new, roomier trans tunnel and firewall. ☠️
02/23/2019

Firewall Friday. We finished up the metal work on our new, roomier trans tunnel and firewall. ☠️

Well...this is our target for SEMA 2019. Rendered Rides got us these killer renderings that are spot on to what we’re ...
02/13/2019

Well...this is our target for SEMA 2019. Rendered Rides got us these killer renderings that are spot on to what we’re building. ☠️ @ Boneyard Builds

Address

8550 Sidetrak
Leeds, AL
35094

Opening Hours

Monday 08:00 - 18:00
Tuesday 08:00 - 18:00
Wednesday 08:00 - 18:00
Thursday 08:00 - 18:00
Friday 08:00 - 17:00

Telephone

(205) 702-6077

Alerts

Be the first to know and let us send you an email when Boneyard Builds posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Videos

Nearby autos & automotive services


Other Automotive Restoration in Leeds

Show All