Churchtown Custom Trucks

03/24/2024

Here’s some pictures of the most recent project. Did a sandblast and paint from the cab back. Put some good epoxy primer on and topped it off with a glossy black single stage. Also did a full aluminum polish on this one. Thanks Mike and Bodensteiner Implement!!

03/10/2024

It’s been awhile, but we’re back at it! Here’s the latest project through the shop. Stripped this one all the way down to get some rust jacking taken care of. Then sandblasted, sprayed epoxy primer, and single stage. To wrap it all up when putting it back together we installed all new brakes, shocks, air bags, torque rods, and stacks. Thanks Shawn!

05/12/2022

The latest project through the shop was Troy Trynowski’s 352. Troy had it stretched and then brought it in for a complete frame sandblast and paint. Thank you Mark and Justin for the extra help on this one
Thanks for the business Troy!

03/14/2022

Another frame job done and out the door

On this one we had the frame and wheels sandblasted, expoxy primed, and then sprayed a single stage paint on top for a gloss finish

12/18/2021

12/06/2021

A few pictures of the last project we had through the shop. On this one we did a bunk back sandblast and epoxy paint on the frame, full polish, and changed the stack tops.

03/18/2021

Full polish and added a RLK Services LLC visor for Ness Pumping Service & Porta Potty Rentals
Thanks to Amcan Truck Parts for great customer service and always hooking us up with great parts. Go check them out!

03/17/2021

Matt Rethwisch’s build we did last fall
2020 389 290 wb
We added an RLK Services LLC visor, half fenders, stacks, 20 inch bumper, cab lights, watermelon under glow, 12 gauge mirror brackets and cab/sleeper panels, had a custom stainless rear light bar made, put dump valves on factory front air ride and to wrap it all together had Steve Oden Clem done and add some pinstripes Contact us today for any of your custom truck needs