Bandit Machine Works

Bandit Machine Works High performance clutch, transmission and belt drive products for American V-Twins since 1987

Manufacturer and distributor of Bandit Machine Works motorcycle products

08/05/2025
01/24/2024

The Derringer 196 Cubic Inch Engine Installed!

Pictured is the 196 Big Block Derringer resting quite comfortable in the Outlaw Bagger chassis. Most all of the design work is done and proofed out. What we have left is the small things like the oil line feed and return plumbing as well as the oil fill for the under transmisson oil tank. We will be designing the composite intake manifold in the next few weeks that will accept the throttle by wire 76mm throttle body. Stay tuned! JV

https://hawayaracing.com/blog/205

If you look close, you can see our contribution to the Arch motorcycle (right inside the belt drive guards)
04/28/2023

If you look close, you can see our contribution to the Arch motorcycle (right inside the belt drive guards)

The ARCH Method 143 brings motorcycle design to the next level.

08/19/2021

After years of success in the mid to late 80’s on the Ironhead®-based Zipper’s Pro-Stock motorcycles, a new motorcycle was quietly being designed to be competitive into the next decade. This motorcycle was based around the new Evolution® Sportster® Engine.

Dave Zehner and John Magee settled on a new chassis design, to be constructed by Bandit Machine in Pennsylvania. Major changes were made to the layout and geometry of the chassis, and there was a complete departure from the venerable 4-speed transmission, that dated back to 1952. A complex integration of an all-new 5 speed transmission occurred at the same time. The Racecase transmission was born to handle the additional power while drastically increasing the durability and cutting down on shift-times at the track.

The continual push for a better-handling, more powerful, and more durable motorcycle still thrives inside Zipper’s today, and is why we are still in business 40 years later.

Gregg Dahl/GMS Racing - Long time user of Bandit clutches and drives, and contributor to our product development and tes...
06/10/2021

Gregg Dahl/GMS Racing - Long time user of Bandit clutches and drives, and contributor to our product development and testing.

We do special requests - 35 tooth aluminum sprocket for 5 speed Sportster with 10 tooth sprocket shaft spline.  12.5 oz.
04/15/2021

We do special requests - 35 tooth aluminum sprocket for 5 speed Sportster with 10 tooth sprocket shaft spline. 12.5 oz.

11/08/2020

Greg Dahl - GMS Racing Engines runs a 7.62 @ 176 mph with a Bandit Machine Works Softail style belt drive - fastest no bar HD to date.

Address

222 Millwood Road
Lancaster, PA
17602

Alerts

Be the first to know and let us send you an email when Bandit Machine Works posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Bandit Machine Works:

Share