TMM Racing

12/07/2023

- Replaced the water pump on this 2015 Yamaha R6 with a new OEM unit. The weephole on the original started to drip coolant with only 9700 miles, indicating that the seal had unfortunately worn out.

I also installed Woodcraft Technologies clip ons(handlebars) and weighted bar ends as well as some trick looking Driven Racing hand grips that match the bike perfectly.

09/23/2023

R6 in for new tires and a bunch of maintenance!

09/22/2023

Loving this No-Mar Tire Changers Cycle Hill HD. Keeps wheel paint safe and makes for fast tire changes. Temporarily mounted until I figure out where I want it in the shop

09/22/2023

Ultrasonic cleaning for a dirty front brake master cylinder with old solidified brake fluid stuck in the fluid return port

09/21/2023

Squeezing some work into my busy schedule.

CRF150R mini-moto
- Install rear subframe, tank, petcock, and plastics.
- Clean, install, and re-jet carburator. Adjust accelerator pump timing
- Install and adjust TPS to factory spec.
- Rebuild brake master cylinder.
- Flush brake fluid, install new front pads, clean caliper pistons, and prep rotor surface.
- New fork seals and fork oil.
- Oil and filter change. New air filter.
- Install new race tires
- Other odds and ends.

GSXR750
- Diagnose and fix no spark condition.
- Fix frozen pistons in right front caliper causing serious brake drag.
- Address any wiring issues found
- Remove dirt dobbers vacation home from exhaust servo 😆

My R6 racebike
- Prep for engine removal after clutch basket failure during my last race weekend..

09/21/2023

My No-Mar tire changer came in the mail today! These are designed for motorcycle and ATV tire changes with specifically designed tools to prevent scratching your wheels.

07/03/2023

Time for a rebuild! 😅

05/18/2023

Set up an appointment for any maintenance or modifications that you want done to your motorcycle! I’ll get you taken care of.

Lake Charles, LA

04/27/2023

Nothing like some track-side fuel system repairs! I was able to temporarily clean the fuel pump housing and strainer and make it the rest of the weekend. This bike will be getting a new fuel pump/strainer kit and the tank interior treated and coated due to surface rust issues. 👍 Spark plugs, wheel bearings/seals, caliper cleaning, chain clean/lube, and air filter at the same time to get it back in perfect shape.

03/03/2022

11/02/2021

The TMM Racing Yamaha YZF-R6.

Raceworx USA Traxxion Dynamics AK-20 Fork Cartridges
Raceworx USA Penske 8987 Rear Shock
R.E.S Superstock Engine Built for VP U4.4 Tuned by Raceworx USA(125whp)
Arrow Full Ti Exhaust System
Vortex/EK Chain and Sprockets
Translogic QS/Auto-blipper
Sprint P08 Air Filter

This bike was a ground up rebuild from a bare frame by myself at TMM Racing 👍

Thanks to Raceworx USA and R.E.S. for the engine and suspension.