Lego Auto Werkz

04/09/2024

This was a fun one. This customer was referred to us through a mutual friend. Unfortunately his 2020 Camaro SS experienced a connecting rod bearing failure. We handled engine removal and the reinstallation. After removing, we sent the engine to Gary Lawson to do a complete rebuild. Some new connecting rods, new crankshaft, all new bearings/rings, and a mild cam & DOD delete from Brian Tooley Racing later, this cars back on the road. Next, it’s off to Wisher Performance Calibration for tuning. Special thanks to my close friend Mason for being there and helping me out through the whole process.

12/16/2023

Customer brought us their 2013 Honda Civic with a concern of a bad passenger front CV axle. We did find that it was bad and replaced it. More importantly, we found the reason it failed. Their engine mount broke which cause the engine to drop down and cause the premature failure of the axle shaft. 1 new axle and engine mount later, and their back on the road.

11/03/2023

Check out this Camaro! We’ve recent have had the great pleasure to do some maintenance work on Patrick’s Camaro in preparation for him to sell it. All fluids changed, replaced the front seats, fixed the horn, and few other small details to get this beauty ready for its next owner to enjoy.
Fresh detail & ceramic coat done by TILIO - Auto Detail, these stunning photos also provided by the owner of TILIO, Zac.

06/26/2023

2013 Focus ST that we did the airlift suspension set up showcased at SE Chicago this past weekend😮‍💨😮‍💨😮‍💨

02/20/2023

Evo X. New clutch from Advanced Clutch Technology and new turbo at once. Customer is finishing some small bits themselves. Should be a rowdy car once he finishes up a few small things.

10/15/2022

That’s a wrap on thjs Airlift 3P with dual Viair set up install.

10/12/2022

Who’s getting bagged next?👀 up next airide suspension using Airlift air struts with Airlift 3P management and dual Viair air compressors.

10/11/2022

One of the latest project. All new brake pads & rotors all the way around. bolt threads came out on the drivers front caliper which is a common issue for these brembo calipers on Subarus. It was properly repaired by drilling and using a timesert. And full air ride suspension with custom trunk set up. Contact us for all your aftermarket needs or standard maintenance!

09/24/2022

Timing belt service

09/22/2022

We had the pleasure of working on this GT350. Vehicle starter went out. To our surprise, 3 out 3 bellhousing bolts were missing. The starter was only held in by 1 bolt on the motor mount. We got the bolts and starter replaced and got this thing back on the road.
Roller📸: GTO Photography

09/08/2022

We can handle all your vehicle needs. Few basic repairs taken care of recently. Rear trailing arm, window regulator, and brakes. Contact us for your repair needs.

07/16/2022

The owner of the wrx that we installed BC racing coil overs on had some different tires put on. So, we were able to get the car back and adjust the height and camber. Here is the final product.

07/06/2022

Before and after photos provided by owner. Simple wheel swap to get this WRX a clean new look.

07/06/2022

07/03/2022

Before photo not taken by me. wrx lowered on BC coil overs. We’ll be lowering it even more once tires are changed out for a smaller size.

07/01/2022

We handle it all. Personal vehicle experience a bad day. Total engine failure. Vehicle got a new long block replacement, new turbo, new Fuel system, cyl4 cooling mod, and a ton of other goodies. Tuning done by ShinjiTuned.

07/01/2022

Tyler Amato wanted to make the switch from being static on BC coil overs to being on bags. His car received air ride suspension with Airlift 3P management and PSI suspension struts/bags. Also new camber arms in the rear. Owner wanted just about fender to lip fitment in the front and a really nice tuck fitment in the rear. Eventually the car will return to Lego Auto Werkz for a custom trunk setup. These photos are not mine but ones I received after the car was complete.

07/01/2022

2013 Focus ST. We’ve done a lot of fun things with this one. Air ride suspension with Airlift 3P management and bags. Rear camber arms. Alignment with camber specs to owners liking. New turbo. Customer trunk set up. Owner has done a lot of his own modifications to make this vehicle really shine. It really has came a long way. Owner: Aiden Caposieno

07/01/2022

Formally, this page was know as “Detail By Chris.” We have stepped away from that portion of the automotive industry to move with the aftermarket customization and modification. “Lego Auto Werkz” is here for you automotive needs. Whether it be basic maintenance needs, mechanical diagnostic/repairs, or aftermarket modifications. We strive for superior quality and workmanship.

06/22/2022

06/22/2022