Wyatt's Workshop

07/12/2026

Installed 4 lawnmower tires as well as a set of valve cover gaskets on 2011 Dodge Ram 1500 with a 5.7L Hemi engine. Zipties held gaskets in place during installation due to tight clearance then i just cut them and pulled them out slowly.

06/24/2026

Started off the day diagnosing and replacing a cracked radiator on a 2008 Chrysler Sebring with a 2.7L V6. Then helped mount a small electric scooter tire. Also replaced HID headlight bulbs on a 2016 Land Rover Range Rover Sport with a 3.0L Supercharged V6. Lastly Diagnosed a failing alternator as well as 1 Battery having a bad cell and the other testing bad on a 2014 GMC Yukon XL with a 5.3L V8

06/20/2026

2015 Ford Edge Titanium 3.5L V6

06/20/2026

2015 Ford Edge Titanium with a 3.5 L V6
Replaced 5 injectors and O-rings for the single remaining injector as well as intake manifold gasket. Runs great again. No more misfires. 🔥💯💯🙌

04/27/2026

2004 Chevy Colorado with a 2.4 L four-cylinder engine. Fuel injectors, fixed fuel injector wire loom, Valve cover gasket, and a rear differential service.
Ended the day diagnosing a faulty ignition switch on a 2006 jeep liberty with a 3.7L V6
As well as replacing 2 battery terminals and a battery on a 2009 Nissan Murano

04/26/2026

Yup shes extra loud at the moment🤌😂😂😂🤦🏻‍♂️
This was the first cold start

04/26/2026

Quick clip

04/26/2026

I had to replace my head gaskets and cylinder heads on my 2000 GMC Yukon XL with a 5.3L V8 engine. I upgraded from the 706 casting heads to the 862 casting heads. I still have to finish the exhaust but installed headers and deleted the EGR valve and lower O2 sensors. Still gotta go for a tune after I finish the exhaust. Gonna do another oil change and fluid exchange in a week and hope we can clear out the rest of that milk in there lol

04/26/2026

Alternator and battery replacement on a 2020 Hyundai Santa Fe with a 2.4L 4 cylinder engine.

04/26/2026