Kev's Rod & Custom

Kev's Rod & Custom Hot rod and custom fabrication, sheetmetal and chassis modifications, Vintage Air A/C installation, aftermarket media technical journalism.

That’s the front end finished on the Nova. We widened the license plate recess (it’s another ‘69 Camaro rear bumper narr...
12/14/2021

That’s the front end finished on the Nova. We widened the license plate recess (it’s another ‘69 Camaro rear bumper narrowed and smoothed) and continued the shape into the removable pan to form a small air intake to help cool the LS motor going in.
Remembered to take a pic as it was being loaded on the truck to take it to the paint shop!

Ford parts:‘40s backing plates, absolutely no rust pitting $40‘32 rear bumper bracket, chrome $30‘36 truck stake bed poc...
03/05/2021

Ford parts:
‘40s backing plates, absolutely no rust pitting $40
‘32 rear bumper bracket, chrome $30
‘36 truck stake bed pockets (6) $10
‘56 F100 chrome ashtray $8
‘36 pickup headlight stands $10
‘46-‘48 S/S headlight rings $10
‘30-‘31 closed car left side door latch, Vintique $10

‘55 Chevy parts:Lower front corner panel $15Cowl vent $15Original hood hinge with spring $25210 wagon S/S trim with clip...
03/04/2021

‘55 Chevy parts:
Lower front corner panel $15
Cowl vent $15
Original hood hinge with spring $25
210 wagon S/S trim with clips $40
Lower front fender patch panels - cut from original fenders, not repro. No rust, no idea why they have filler $25

Having a clearout...Top to bottom:Reverse eye A ‘tall’ spring 43” eye to eye $100A main leaf 37 1/2” eye to eye $40A spr...
03/04/2021

Having a clearout...
Top to bottom:
Reverse eye A ‘tall’ spring 43” eye to eye $100
A main leaf 37 1/2” eye to eye $40
A spring 44” eye to eye $100
Transverse spring 37 3/4” $50
Front spring in bits 31 1/2” $40

Narrowed, smoothed and recessed Camaro bumper on a ‘65 Nova. Welded seams between quarters and light panels, custom roll...
01/21/2021

Narrowed, smoothed and recessed Camaro bumper on a ‘65 Nova. Welded seams between quarters and light panels, custom roll pan and split and welded tops of quarters to achieve decent trunk lid gaps.
Glad that’s done!

Filled the hole in the front of this MkI Capri with a new 302 and C4 today. Pity the fitting kit was about as much use a...
10/21/2020

Filled the hole in the front of this MkI Capri with a new 302 and C4 today. Pity the fitting kit was about as much use as a chocolate teapot! With Kiwi Steve Davies.

Seeing as we can’t go to swapmeets at present we’ll throw this stuff up here. Collection preferred. Cash or PayPal.‘30/‘...
07/13/2020

Seeing as we can’t go to swapmeets at present we’ll throw this stuff up here. Collection preferred. Cash or PayPal.
‘30/‘31 apron $40
Ladder bars $60
‘49 Chevy pass rear 1/4 $45
‘57 Ford panels $50
‘55 Chevy front corner $15
‘55 Chevy hood hinge $40
Spotlight (not working) $20

Never again. Ever!
06/12/2020

Never again. Ever!

Anyone need GT40 knock-off wheels? 9 1/2x15”, adapters are 4 1/2 and 4 3/4 x 5. Wheel and adapter only. $250 each or ...
05/14/2020

Anyone need GT40 knock-off wheels? 9 1/2x15”, adapters are 4 1/2 and 4 3/4 x 5. Wheel and adapter only. $250 each or $1000 for five.

Color/colour sand and polish then comes the fun part - assembly!
04/24/2020

Color/colour sand and polish then comes the fun part - assembly!

‘56 F100 - curved bed sides with new fender mounts so no hardware shows inside the bed.
03/25/2020

‘56 F100 - curved bed sides with new fender mounts so no hardware shows inside the bed.

Gaps... they make all the difference...!
03/21/2020

Gaps... they make all the difference...!

Address

651 E Lambert Road
La Habra, CA
90631

Telephone

+17146868982

Website

Alerts

Be the first to know and let us send you an email when Kev's Rod & Custom posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category