Scott's Hotrods

10/09/2026

Camren Beattie is set up at the Southeast All Truck Nationals in Maggie Valley, NC. Today is going to be a beautiful day.

10/08/2026

1966 Chevrolet C10 Short Bed
Coilover Chassis
Terio Comerose
Daleville, Virginia

Coilover Chassis
Starting at $14,750
INCLUDED FEATURES:
•2”x4” Mandrel Bent Frame Rails
•8-Point Chassis Round Tube X-member
•Body Mounts
•Scott’s IFS
•1-piece IFS Crossmember
•Tubular Upper & Lower A-Arms
•CNC Adjustable Upper A-Arm Rod Ends
• Aldan Single-Adjustable Coilovers
•Built-in Anti-Dive
•Manual Rack & Pinion
•Forged Steel Spindles
•Scott’s 4-Bar Rear Suspension
•Machined Link Bars
•CNC Machined Rod Ends, RH & LH Thread
•Panhard Bar
•Moser Ford 9” Housing Fill & Drain Plug
•31-spline axles
•100% TIG-Welded
•All Grade-8 Hardware
•LIFETIME GUARANTEE

Upgrade on this chassis:
Pinched Rear Rails
Power Rack & Pinion
Torsion Spline Sway Bars
Wilwood ProSpindles
14"
LS Motor Mounts
ZF8HP Adjustable Dropout Trans Mount
Stainless Steel Fuel Lines Plumbed
Stainless Steel Brake Lines Plumbed
Brake Flex Lines
Moser Engineering M9 FAB Housing
35-spline Axles
3.25 WaveTrac 3rd member
Scott's Aluminum EFI Fuel Tank
PA-6 In-tank Pump
240-33ohm Sending Unit
Chassis Black
Scott's Power Steering Line Kit
Scott's Fuel Cap
Wiwlood Parking Brake Cables
Wilwood Compact Master Cylinder
Corvette Booster
Steering Linkage Kit
GUNI 45S Wheels

Chassis Total: ~$36,000

Other Upgrades Pictured:
LS3 6.2L Engine
ZF8HP Transmission
4" Aluminum Driveshaft
Scott's Billet LS Valve 'n Coil Covers
Pulley Kit
TVS2650 Hot Rod Kit
Scott's Hotrods Custom Stainless Steel Headers & Exhaust
Mufflers
Scott's Hotrods Billet Exhuast Hangers
Gear L**e
Johnson's Radiator Works

Fabricated the chassis
Welded the IFS
Little Andy Built the IFS
Connor Build the 4-Bar
Jordan, Clay & Caleb Machined the CNC Parts
Sev Built the Headers & Exhaust
Sev Aseembled the chassis
Mark Assembled the Supercharger & Pulley Kits
provided Tech Assistance
took the pictures

10/07/2026

The Fit & Finish of a vehicle can Make or Break a completed project. If the gaps suck, why bother looking at the rest of the car??? This awesome ‘57 Tri Five is at the upholstery shop right now, so go grab the latest Modern Rodding and check out the article.



BIG THANKS to our stellar fabricator Shawn; the paint team for their amazing ex*****on, Tony, Jason & Steve; Camren for transporting the vehicle between the shops; Mark for assembling the vehicle, wiring & plumbing; the team at TITAN for media blasting, powder coating & Cerakote-ing many parts and of course, our amazing customers, the Tuckers.

10/07/2026

1953 Ford F100
Coilover Chassis
Greg Dyer
Edenton, North Carolina

Coilover Truck Chassis
Starting at $14,750
INCLUDED FEATURES:
•2”x4” Mandrel Bent Frame Rail sections Front & Rear
•2”x6” Frame Center Section
•Dual-Layer Chassis X-member
•Cab & Bed Mounts
•Scott’s IFS
•1-piece IFS Crossmember
•Tubular Upper & Lower A-Arms
•CNC Adjustable Upper A-Arm Rod Ends
•Aldan Single-Adjustable Coilovers
•Built-in Anti-Dive
•Manual Rack & Pinion
•Forged Steel Spindles
•Scott’s 4-Bar Rear Suspension
•Machined Link Bars
•CNC Machined Rod Ends, RH & LH Thread
•Panhard Bar
•Moser Ford 9” Housing Fill & Drain Plug
•31-spline axles
•100% TIG-Welded
•All Grade-8 Hardware
•LIFETIME GUARANTEE

Upgrades on this chassis:
New Power Rack & Pinion
1" Solid Sway Bar
11"
Single-Adjustable Coilovers
SBF Motor Mounts
4R70W Adjustable Dropout Trans Mount
Stainless Steel Brake Lines Plumbed
Brake Flex Lines
Stainless Steel Fuel Line Plumbed
3.70 TrueTrac 3rd member
Scott's Aluminum Fuel Tank
240-33ohm Sending Unit
Scott's Fuel Cap
Scott's Power Steering Line Kit
Wilwood Compact Master Cylinder
Steering Linkage Kit
TITAN Powdercoat - Chassis Black
Dry Assembly Roller
GUNI 45S set

TOTAL: ~$30,000



Build Team
IFS: Little Andy
IFS QC: Big Andy
4-Bar: Connor
Parts Welding: Mark
Machined Parts: Clay, Jordan, Caleb
Laser Cut Parts: Travis
Chassis Mandrel Bends: Justin
Chassis Fabrication: Rob
Final Assembly: Sev & Lynn

10/07/2026

You wanna know who is even cooler??? BAM! Go give him a big hug this Thursday, Friday & Saturday.

10/06/2026

10/06/2026

1948 Plymouth Coupe
Coilover Chassis
Dennis McCarthy
Hartland, Wisconsin

Coilover Chassis
Starting at $14,750
INCLUDED FEATURES:
•2”x4” Mandrel Bent Frame Rails
•8-Point Chassis Round Tube X-member
•Body Mounts
•Scott’s IFS
•1-piece IFS Crossmember
•Tubular Upper & Lower A-Arms
•CNC Adjustable Upper A-Arm Rod Ends
•Aldan Single-Adjustable Coilovers
•Built-in Anti-Dive
•Manual Rack & Pinion
•Forged Steel Spindles
•Scott’s 4-Bar Rear Suspension
•Machined Link Bars
•CNC Machined Rod Ends, RH & LH Thread
•Panhard Bar
•Moser Ford 9” Housing Fill & Drain Plug
•31-spline axles
•100% TIG-Welded
•All Grade-8 Hardware
•LIFETIME GUARANTEE

Upgrades on this chassis include:
1" Solid Sway Bar
11"
Motor Mounts
Adjustable Dropout Trans Mount
Stainless Steel Brake Lines Plumbed
Fragola Performance Systems Brake Flex Lines
Moser Engineering M9 FAB Housing
35-spline axles
Dry Assembly

TOTAL: ~$22,500



Special thanks to all of our team members for the consistent quality work they put into making all of the components it requires to manufacture a complete chassis. From taking the order on the phone to machining a small billet line clamp to mandrel-bending a frame rail to welding out the brackets to assembling the brakes, it's not just one person.

10/05/2026

We love Horsepower. This Magnuson Superchargers 2650 Hot Rod kit is exactly what your LS3 needs. Get one from Superchargers Online today!

Then go to Wegner Automotive for the best pulley kit.

Dress up your heads with a set of our LS Valve ‘n Coil Covers. These are coated with CERAKOTE® by the team TITAN Powdercoat. The stainless steel headers & exhaust are coated with Hi-Temp air-dry Cerakote.

TITAN also powder coated the entire chassis in Chassis Black.

Make sure you back it up with a stout aluminum driveshaft from Knoxville Driveline.

The MagnaFlow Performance Exhaust mufflers are going to make this best sound mean & clean.

Thanks to Kyle Fedel for building this chassis, Sev for fabricating the headers & exhaust, mark for welding the exhaust, Mark for assembling the Supercharger & Pulley Kits and Camren Beattie for ordering all the parts and taking the photos.

10/05/2026

The Ultimate Chassis for your GMT400 Platform truck is built by Scott's Hotrods 'n Customs. All Chassis are Built-to-Order. No cookie-cutter chassis here.

The Scott's Hotrods OBS Coilover Chassis with a LOW Ride Height pictured lives under "BIG PAPA." This height requires Bed, Cab & Inner Fender modifications. If you don't want to be this low, no problem.

"BIG PAPA" is currently a finalist for the coveted Truck of the Year Late Award. It qualified at the Heartland Nationals in Des Moines earlier this year. The Good-Guys Regional Awards include 7 award categories, where "finalists" are selected at a series of events. Finalists are then voted on by a committee and the winners are announced on October 9, 2026.

This chassis features Antique Bronze Vein Powder Coating applied by our sister company .
Coilovers are from .
Stopping is provided by 14" .
provides the 525HP LS3 sprak.
A steel shaft takes the power to the M9 FAB Rear End.
The 🔥 runs through a set of LS Swap Stainless headers to our custom stainless exhaust and a pair of Mufflers.
The exhaust is wrapped with Titanium Exhaust Wrap.
The entire chassis is 100% TIG-welded.
All hardware is Grade 8.