Boosted Cycle Performance & Fabrication

Boosted Cycle Performance & Fabrication One stop shop for HAYABUSA turbo kits, engine builds, and dyno tuning. We build the fastest most rel Specializing in Suzukis, dominating in turbo hayabusas.

For the absolute best turbo installs busa builder in the south, look no further. We are an RCC turbos dealer so you will get nothing but the best parts. We can set you up from 230whp, all the way up to 650+hp.

A quick sneak peak at the complete   system on the       build. Along with the start of the front mount ecu and electron...
11/16/2021

A quick sneak peak at the complete system on the build. Along with the start of the front mount ecu and electronics bracket. gen2

11/06/2021

Miss me? I miss posting unique builds that’s for sure. I had to take some time away to work on recovery. But with that said, check out this . A 1407cc making a respectable 459whp, but a even more impressive 296tq. Usually I see roughly tq readings a little less then half of hp. That really puts this set up in to . comes on hard like a bike.

Be smart with mounting your smart coils when installing a stand alone ecu on your Gen1 or gen2  . This bracket is design...
11/06/2021

Be smart with mounting your smart coils when installing a stand alone ecu on your Gen1 or gen2 . This bracket is designed and manufactured in house. It was particularly designed using the factory mounting points on the fairing stay, radiator mount and an additional riv-nut on the frame. It clears the factory radiator, forks, steering stabilizer and most importantly the commonly used heat exchanger and fill fitting. Lastly, with how the coils are configured, you can use equal length plug wires for the most consistent performance through all cylinders. This bike is being wired for a ecu, with a custom Rcc turbos and ultra

I’m really interested to see what this combo does. Stock stroke, 83mm bore which brings displacement up to 1407cc using ...
05/26/2021

I’m really interested to see what this combo does. Stock stroke, 83mm bore which brings displacement up to 1407cc using Wossner Pistons USA gen 1 style block and pistons. The turbo kit is and Rcc turbos stage 2 ultra (air to water intercooled) with a full exhaust. Of course it will be running on Vpracing X98 fuel. Lastly, an AMS2000 will be used to keep the boost in check. Comment below how much power you think this combo will make! 🌽

Somebody pinch me. The     is here! If anyone in the   area manages to get one before I do, hit me up for some     time....
01/29/2021

Somebody pinch me. The is here! If anyone in the area manages to get one before I do, hit me up for some time. I’d love to see how much power they’ll be able put down. Only stipulation is you gotta let me take it apart a little. Nothing major. Just pull the seat off, lift the tank up to poke around, and maybe a side fairing. You can make out the the tell tale shape of the headlight, and outline it’s a with some accented lighting or turn signals in the ram air openings. The gauge cluster resembles a gen 2 cluster, with a more advanced center screen. You can also see in the dash pic that it’s using the gen 2 top clamps with the same cover over the key. #2021

Project 500hp for $1500 struck gold!! And by gold I mean chunks of bearings in the oil pan... I had   on the dyno a litt...
01/08/2021

Project 500hp for $1500 struck gold!! And by gold I mean chunks of bearings in the oil pan... I had on the dyno a little over a month ago and after making 405hp I noticed a slight knocking sound coming from the bottom end. The little oil leak I noticed at the beginning of the session was trying to tell me something... It will be a little while longer until I can pull the motor out as I have a ton of customer work I need to finish up with first. As soon as time allows, I’ll get it out. I did find what caused this and it’s pretty interesting...

If you haven’t seen the series, check it out here.

https://youtube.com/playlist?list=PLQ8nLH9vaD-orqFDFGpHbEhENupShVSnJ

11/26/2020

Just wanted to give a quick thanks to everyone who’s been watching and commenting of the 500hp for $1500 build series. Haven’t seen the videos yet? Head over to and search . HP TECH is devoted to taking some of the out of what it take to and . Head on over and be sure to watch, like and subscribe!

Our   series has been kicked off on  . We’re attempting to build a 500hp capable       for less than $1500. The videos a...
11/10/2020

Our series has been kicked off on . We’re attempting to build a 500hp capable for less than $1500. The videos are too long for IG, so search on YouTube to follow along. Be sure to and for future episodes.

Part 2 of our 500hp for $1500 is now up! Check out out.
11/03/2020

Part 2 of our 500hp for $1500 is now up! Check out out.

Back at it again with part two! If you haven’t seen part one, check it out here. https://youtu.be/djpgwF4Qw8U Thanks for all the overwhelming support of the ...

500hp capable     engine for $1500?? Sounds crazy right? Well let’s find out! I’ve hinted at the   series for awhile now...
10/29/2020

500hp capable engine for $1500?? Sounds crazy right? Well let’s find out! I’ve hinted at the series for awhile now. But now it’s time to launch it now that I’m back on track with my health. Thanks so much for all the kind words when I was out for the last two months. I have some great followers. 🇨🇱

Follow along as we test cheaper alternatives to a fully built engine to reach a 500hp goal. HP TECH is a new series by Boosted Cycle Performance to help take...

Address

1424 Northpark Drive
Kingwood, TX
77339

Alerts

Be the first to know and let us send you an email when Boosted Cycle Performance & Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share