Dirty Werkz Customs

Dirty Werkz Customs I try to fix more than I break, but no promises. I typically work in the shop Monday through Thursday on project cars. Fridays are for our everyday vehicles.

The weekend is one day for the CFO and one for area beautification. All subject to change!

Pair of lightly used like new shocks. Let me know if you need them. 😂
05/22/2026

Pair of lightly used like new shocks. Let me know if you need them. 😂

Mother Nature is the best welder prove me wrong 😂
05/22/2026

Mother Nature is the best welder prove me wrong 😂

Almost down to bare frame. Then metal repair and rust clean up.
05/22/2026

Almost down to bare frame. Then metal repair and rust clean up.

EFI going in.
05/22/2026

EFI going in.

This one’s going to be a lot of work or sold off as parts.
05/11/2026

This one’s going to be a lot of work or sold off as parts.

Back on the classic cars. Got tables full of parts ready to go
05/11/2026

Back on the classic cars. Got tables full of parts ready to go

Rear main seal is in. Needed to replace the turbo as well. Engine bay looks empty with just engine and wires. Now time f...
04/30/2026

Rear main seal is in. Needed to replace the turbo as well. Engine bay looks empty with just engine and wires. Now time for the transmission to go back in.

Everyone likes the old stuff, but gotta get the Escape finished and off the lift. Had a rear main seal leak. Basically h...
04/28/2026

Everyone likes the old stuff, but gotta get the Escape finished and off the lift. Had a rear main seal leak. Basically half the car has to come out to get to it just to find out the seal I have is the wrong one. New one will be here in the am 🤞

The escape is going back on the lift again for a couple days. Getting a rear main seal and new turbo. So pretty much the...
04/15/2026

The escape is going back on the lift again for a couple days. Getting a rear main seal and new turbo. So pretty much the entire drivetrain has to come out. 😂 going to be a fun one.

On the Bronco side we are almost down to bare frame and getting close to blasting it and painting it. Getting the body g...
04/15/2026

On the Bronco side we are almost down to bare frame and getting close to blasting it and painting it. Getting the body gaps close while it’s on the jig before pulling it apart again to start getting it ready for final welds/under coating/and sealer.

Address

King, NC
27021

Website

Alerts

Be the first to know and let us send you an email when Dirty Werkz Customs posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category