09/19/2026
Things just keep getting worse for “the goat”.
After his Kart was protested after the race by the Lil’ Currence Kid, the following infractions were discovered. 
* Governor/RPM: governor removed, defeated, internally altered, or linkage disguised to allow higher RPM. Murder was determined that the governor was removed and the RPMs was estimated at 9000. 
* Carburetor: bored/reamed venturi, modified throttle shaft/plate, altered emulsion tube, jets, air bleeds, or hidden carb machining. Carburetor was reamed so bad. It’s a wonder it ran. 
* Cylinder head: milling to raise compression, porting/polishing, reshaped combustion chamber, valve-seat work beyond the rules, oversized valves, altered valve guides. Cylinder head was decked.
* Valve train: aftermarket or modified rockers, increased rocker ratio, different-length pushrods, heavier valve springs, spring shims, altered installed height, lightweight retainers. Gold plated, rockers, and pushrods were found in the motor. 
* Camshaft: reground or aftermarket cam made to look stock, altered lift/duration/timing, advanced or re****ed cam timing. Grinder marks was found on the camshaft. 
* Crankshaft/rod/piston: stroker crank, offset grinding, non-stock rod length, altered piston compression height, lightweight/internal machining, increased displacement. Motorhead, titanium, crank and Pistons. 
* Block/bore: oversized bore beyond the permitted service limit, deck machining, relocated dowels or other changes affecting geometry. Motor was bored 80 over. 
* Flywheel/ignition: altered flywheel key or ignition timing, offset key, modified coil location/gap, aftermarket ignition components disguised as stock. 14° timing key was found. 
* Exhaust/intake: internally modified manifold/header where exterior dimensions appear legal, gasket matching or material removal in areas that aren’t obvious externally.
* Fuel: prohibited oxygenates/additives or fuel blended to gain power when a spec fuel is required. kart had 114 VP Late Model Plus in the tank.
* Parts substitution: components from another Predator/Honda-clone version that physically fit and look similar but have more favorable dimensions.
* Tolerance manipulation: combining individually plausible parts at extreme tolerances—deck height, gasket thickness, chamber volume, valve depth, etc.—to create an advantage when
After the above in fractions were found, the professor has determined that the goat is in eligible for miniwedge competition until fall of 2030, this decision is under protest.
If you have any other information on possible infarctions please let us know. Comment below!
