Bauhaus Engineering

Bauhaus Engineering Bauhaus Engineering has its roots going back to the mid 80's in amateur racing. The designs evolve f

Presenting a pelican blue 2001 A4 Quattro 5-speed with a black interior. Additional updates will be shared as the vehicl...
09/20/2025

Presenting a pelican blue 2001 A4 Quattro 5-speed with a black interior. Additional updates will be shared as the vehicle nears completion and becomes available for sale.

This is a new design for the 2.0T wastegate linkage. This allows adjustment to set wategate and improves on the factory ...
07/22/2025

This is a new design for the 2.0T wastegate linkage. This allows adjustment to set wategate and improves on the factory connection at the lever. The original connection was subject to wear which would allow the wastegate to leak. A rod end is designed for rotation. The rod end and fasteners are aviation grade.

This truck has a complete 1.8 PL 16v swap including close ratio transaxle with a tall 5th gear, rear disc brakes, custom...
06/07/2023

This truck has a complete 1.8 PL 16v swap including close ratio transaxle with a tall 5th gear, rear disc brakes, custom rear axle drop and power steering.

SOLD- Scirocco Mk2 1986 Power Window Regulators for sale.
05/04/2022

SOLD- Scirocco Mk2 1986 Power Window Regulators for sale.

Camshaft locking tool for the EA113 (VW/Audi 2.0T FSI). New design utilizing a stiff boxed bridge and 4140 CrMo pins. T...
05/04/2020

Camshaft locking tool for the EA113 (VW/Audi 2.0T FSI). New design utilizing a stiff boxed bridge and 4140 CrMo pins. This is used in place of the factory T10252 tool.

• Boxed bridge transfers load with less flexing
• CrMo pins – stronger than standard carbon steels
• Precision machined for proper pin alignment
• Press fit pins that are then TIG welded

$75 which includes shipping within the US
Please inquire about international shipping

This bolt-on OEM style stressbar kit is for the Audi B5 chassis. It uses an OEM aluminum C5 bar made to fit the narrower...
02/23/2019

This bolt-on OEM style stressbar kit is for the Audi B5 chassis. It uses an OEM aluminum C5 bar made to fit the narrower B5 chassis. The key feature is the highly modified right side bracket. It provides clearance for A/C lines. This design eliminates the risk of kinking of fracturing these tubes if they are bent.

This replicates the factory setup found on the A6 and adds the same bar that is used in the 2001 A4 and S4's

$125 + shipping

The pilot bearing adapter second production run has been completed. The kits are available for immediate delivery. Pleas...
02/07/2019

The pilot bearing adapter second production run has been completed. The kits are available for immediate delivery.

Please inquire about current pricing.

This is the original proven design sold to numerous enthusiasts over the past 8 yrs. I can also be contacted through AudiZine and QuattroWorld under the username "Gearbox".

CAD adapter rendering. Production run has been ordered. ETA late Feb.
01/12/2019

CAD adapter rendering. Production run has been ordered. ETA late Feb.

FS: Audi V6 30v 2.7T Aluminum Thermostat Housing. This is the upgrade for the plastic housings found on the 2000 and up ...
12/30/2018

FS: Audi V6 30v 2.7T Aluminum Thermostat Housing. This is the upgrade for the plastic housings found on the 2000 and up 2.8 and 2.7t engines. Includes new o-ring.
$85 with free shipping in the lower 48 states. I accept PayPal. I typically ship within 24 hrs.

11/22/2018

A second production run for the Pilot Bearing adapter is currently being discussed. I've had enough reactions to the first batch close to being sold out that I'm looking to continue supplying the market. I'll post more when production details are worked out.

Upper shock mount and race only control arms in its final stages of development. The rod ends are Teflon lined Aurora AM...
07/07/2018

Upper shock mount and race only control arms in its final stages of development. The rod ends are Teflon lined Aurora AMT series units with custom stainless adapter bushings to fit the Audi allroad upper suspension mount using the factory 10mm hardware.

The links are 4130 tubing with 4140 adapters TIG welded around the circumference and 2 rosette welds each end. The designed lengths allows the nominal camber to be ~2.5º negative with an adjustment range of ± 2.5º.

The shock brackets are aluminum fabrications designed on paper and machined by hand. The upper shock bolt is a mil-spec shear bolt with a .001-.002 clearance across the 2 brackets and in the stainless adapter bushings.

The control arm link attachment to the upright design will be released at a later date. It features high mis-alignment Aurora HXAM series rod ends and MS hardware. This will fit into the unmodified factory upright without the need for adapter pins used in commercially available arm kits.

Roll center adjustments can be made at the outer link connections with custom spacers.

05/21/2018

Nearly fifty million Americans suffered panic attacks, phobias, or other anxiety disorders in the past year. Sixteen million suffered major depression, which is now the leading cause of disability …

Address

Kansas City, MO

Website

Alerts

Be the first to know and let us send you an email when Bauhaus Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Bauhaus Engineering:

Shortcuts

Share

Category