Tater Built Turbochargers

06/02/2026

I have a Reman Stock size Holset turbocharger with brand new OE holset actuator. this is stock size build (new seals bearings and install kit) that will work on the 8.9L Cummins ISC & ISL Motors. retail this turbo charger is over $3500. im asking $3000 plus shipping or local pick up.

06/01/2026

Brand New Stock Size Garrett Turbocharger for 6.7 Powerstroke. 11-14 F250,F350, & F450. $1600 takes it bought for customer that backed out on us just trying to get our money back on it. can ship on buyers dime.

06/01/2026

I have (2) stock OE garret Powerstroke turbochargers. these are for 99.5-02 7.3L Powerstroke with fresh rebuild kit. they are stock size compressor and turbine. $650 per turbo, pedestal not included.

05/16/2026

Its been a long time coming since last September when we started this progect. But we got it done and it's on its way to its home for Michael Brown to punish it for being such a pain to build! This is our Dual Ball Bearing G57 Boreless 125mm 5" charger. This is going to be a Big Thumper to say the least! She will have no issue going 3000+hp at UCC! We shall name it Big Dick Randy!
We will prove its performance very soon and have it in production for you guys wanting a 5" Big Thumper Charger. Price is still undetermined yet. Its a very time consuming build! This is a G57 so its a 118 9blade turbine and in the future i wanna work on getting a larger turbine wheel for them.

05/07/2026

Tater Built Fab side finishing up this build. Steed Speed T6 Comp with single gate. Our Dual Ball Bearing s484 96 1.32 T6 paired with our G57 115 118 1.20 T6 open housing. Then all of Stainless 065 wall polished inside and out tig welded together. All built in house here at Tater Built Turbochargers. Compound setup all Vbanded together. All the intercooler piping Vanjen flanged/clamped together. Then we used a On3 6" core universal intercooler mounted it in the factory Transmission cooler mounts. Very clean setup that they are shooting for 1800hp on fuel only for a street diesel sled pulling class

03/26/2026

Ok Guys and Girls! Lets See What Your Best Editing Work Is!!!
My favorite Edit gets a Free SWAG Pack! Tater Built Hoodie, T-shirt, Koozie and Tater Built sticker! Shipped to you for free!

We are going to have our 6 door megacab long bed Wrapped.
I want it to be Turbocharger and Compressor Wheel Themed with some good design. And of course to say " Tater Built Turbochargers " on the side of it. I wanna keep the truck silver since it is silver. I want it be mainly " Grey, Black, silver " with a small amount of red accents.
Ive been playing with AI already my self so your going to have to put some work in.

Here is your blank slate you got till monday! Lets see!

03/18/2026

Who wants to see the whole overhead video of our compound turbo 6door megacab long bed? Tell us what you think

03/18/2026

Check out this sweet video our good customer Brumley’s Automotive & Truck Repair made and basically mainly featuring our 2G swap kit and our G42 charger!

03/12/2026

We will be out of the shop rest of today and tomorrow attending FP 5.0. Be sure to stop by the booth if you are there to grab you some merch and check out our new build we have wrapped up. pictures will be posted later first. if you need anything text messages will be easiest to respond to rather than phone calls but we will do our best. 567-208-2227. Thank you and hope to see ya there.

Send a message to learn more

03/04/2026

SWAG GIVE AWAY TIME!
Closest gues tip to tip on our 2006 6Door Mega Cab Long Bed Truck! Comment your exact gues and with the size of the Hoodie and T-shirt you would like. We will DM you for address! You got till 9am Eastern time Thursday morning!

Edit for clarity. We are measuring straight line edge of tip to edge of downpipe with a tape measuring. So the straightest shot from edge to edge.