Extra Mile Mechanix LLC

Extra Mile Mechanix LLC Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Extra Mile Mechanix LLC, Automotive repair centre, Irrigon, OR.

πŸš™ On-Site Mobile Auto Repair
πŸ“ƒ We are fully insured for all services provided
🧰 10+ years of experience in all services
πŸ“… In business since 2021
#️⃣ USDOT - 4525001
πŸ“ Based in Irrigon, OR
πŸ›  Serving Umatilla, Morrow County & Further
πŸ“ž 541-720-8462

07/16/2026

1996 Honda Accord No Crank No Start diagnosis.

The magnets are in and installed on one of our service trucks. We are thinking about designing a website next to help ou...
07/13/2026

The magnets are in and installed on one of our service trucks. We are thinking about designing a website next to help our clients get their requests in easier and quicker.

We had several jobs to complete on Friday, starting with this 2012 Toyota Sienna that needed a new A/C compressor and co...
06/30/2026

We had several jobs to complete on Friday, starting with this 2012 Toyota Sienna that needed a new A/C compressor and condenser. We started the day at 6:00 a.m. to make sure every vehicle was completed before closing.

We were so focused on getting the work done efficiently that we missed a few photos we thought we had taken. For this repair, we properly evacuated the refrigerant using our recovery machine and storage tank, replaced the compressor and condenser along with the required seals, pulled a deep vacuum for the specified amount of time, and recharged the system to the correct level.

After the recharge, we verified that both the front and rear A/C systems were blowing cold and operating properly. Another job completed and another customer ready for the heat.

06/24/2026

**How to Get Your Estimate Started Faster**

To help us review your request and begin the estimate process as efficiently as possible, please include the following information when contacting us:

β€’ A clear description of the issue, repair, or service requested
β€’ Your first and last name
β€’ Your email address
β€’ Your phone number
β€’ The vehicle’s VIN or license plate number

**For emergencies, please call us directly. For all non-emergency questions, estimate requests, and general inquiries, please send us a message if possible. We will get back to you as quickly as we can.**

Messaging helps us stay focused on current jobs and scheduled work while allowing us to respond to inquiries more efficiently.

Your VIN or license plate number provides us with the exact specifications of your vehicle only and is included on estimates and invoices to identify which vehicle was worked on.

Once your initial estimate is ready, it will be sent to the email address you provided for review and approval.

A service address is not required during the initial inquiry. It can be provided after the initial estimate has been reviewed and approved.

Your privacy is important to us. All personal and vehicle information is kept 100% confidential and securely handled.

Providing complete information at the beginning helps us respond faster and prepare a more accurate estimate. Thank you for helping us keep the process organized and efficient.

06/04/2026

2016 Ram 1500
Client needed a new blower motor.
Found out afterwards that it was starting to squeal and such so the replacement was needed anyways.

Disassemble and reassembled for the 2016 Nissan Murano air shutter assembly replacement
05/28/2026

Disassemble and reassembled for the 2016 Nissan Murano air shutter assembly replacement

05/28/2026

Decided to do a short video showing the replacement part doing its job on this 2016 Nissan Murano. Pictures will be posted right after this for the way this repair was completed without removing the bumper.

Completed a Ford 4.6L spark plug thread repair on cylinder  #4 after finding the threads damaged/stripped.This repair wa...
05/12/2026

Completed a Ford 4.6L spark plug thread repair on cylinder #4 after finding the threads damaged/stripped.

This repair was done using the proper in-vehicle thread insert repair kit & procedure. The spark plug bore was inspected, cleaned, repaired with the proper thread insert, secured with red Loctite, and the spark plug was torqued to specification. All metal shavings/debris inside the cylinder were blown out, and the engine was manually rotated afterward to confirm there was no binding, interference, or abnormal resistance.

The borescope pictures are a little difficult to see clearly, but the repair procedure was followed to a T from start to finish. Will add better pictures once we pull them from the borescopes SD card.

We are finally getting started on a project we purchased last year: a 1996 GMC C3500HD Cab & Chassis currently equipped ...
04/29/2026

We are finally getting started on a project we purchased last year: a 1996 GMC C3500HD Cab & Chassis currently equipped with a 6.5L Detroit diesel.

This truck will be converted to a 7.3L IDI diesel with a ZF-5 manual transmission. The 6.5L Detroit still runs strong with zero blow-by, so it will be fully gone through and repurposed into another truck.

The main reason for the conversion is reliability and heavy-hauling capability. The 7.3L IDI is known for being a dependable workhorse and makes comparable power to the 6.5L without a turbo, leaving room for future upgrades.

Once complete, this truck will be set up for serious hauling with a pull-behind hitch system, a 34,000 lb 5th wheel hitch, and a gooseneck adapter to handle multiple trailer hookup styles. It will also be equipped with a 105-gallon diesel auxiliary tank to extend range and support long-haul operations.

The client reported that they had replaced the alternator and battery, but were unable to get the vehicle to start. A br...
04/22/2026

The client reported that they had replaced the alternator and battery, but were unable to get the vehicle to start. A brief inspection revealed that the positive side terminal was tightened to its maximum, yet still exhibited movement. By adjusting the terminal to establish sufficient contact, the vehicle was successfully started. The client elected to replace the terminals. Additionally, the old codes were cleared and the steering angle sensor was recalibrated due to the battery disconnection.

Address

Irrigon, OR
97844

Telephone

+15417208462

Website

Alerts

Be the first to know and let us send you an email when Extra Mile Mechanix LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Extra Mile Mechanix LLC:

Share