A good buy on a quality proven piece!
All automotive needs from gas to diesel
Rear ends,transmissions and engines plus
Nitrous fils, tuning and flowing. If you need it done right just call.
Operating as usual
A good buy on a quality proven piece!
Brad Clark killing it again!
Ok so with the constant pricing increase from manufacturers and extended wait times I am changing the way we do things at the shop.
1. Drop off and pickup by appointment only and no same day appointment unless emergency and we have talked! Remember your emergency isn’t always my emergency.
2. 50% of original quote required as deposit at drop off.
3. I am not a storage facility! I am only going to allow a small number of jobs at the shop at a time, when one leaves I will allow another to come. I only have so much space and did all I could afford on the addition last year but this will help things flow and get you your stuff back sooner!
4. Starting July 1st ( tomorrow ) once your unit/part or whatever is completed and you’re notified you have 1 week to schedule pickup and 2 weeks to pickup from date notified of completion. After that unit or parts might be sold and you go to back of line and I will build another.
5. I am offering a expedited service for a extra fee. Cost is based on the job. In summer months only allowing 2 per month. In winter time I will allow 1 a week. So if you have the drive through urge then please inquire about it!
Again I hope all understand and trust this is to help you and me to do better and shorten wait times as much as possible! This is also to help the cost I can control! Things are thinning out and hopefully be rolling in and out real soon!
And another….🤦🏼♂️price increase
Okay as some know I have stopped taking on work for a little while now as I am behind further than I should be. I am working hard to get caught up but some things are out of my control. Once I do start taking work again which should be in a couple of weeks things will be a little different. Everyone wants a one man shop quality but not the one man shop wait time! So with that said to help me to help you all pickup and drop off will be scheduled. All contact,information and questions will be through PM on this page ( not my personal page) any that is outside of this page will not be replied to. The phone is a great tool but it also cost a ton of time in interruptions. I am looking into getting a business phone soon and if or who do you can call or text that number. Again this will help all of us and get you back on the road faster! I have tried to hire help and everyone knows what that is like and actually had a guy for the last few months that is now moving on to bigger better things so at this time it’s back to me and going to stay that way for a while. Thanks for your understanding.
Some people’s kids!🤦🏼♂️😂😂 lol jk
That Kc Maxx The Firebird hard on chit!
At least he got that monkey off his back at KO28S
KO28S at US36 raceway brought to you by Race Star wheels May 1st this Saturday!
It’s going to be a hell of a shootout with someone of the best in the country on the property! This race has only been won by 2 different nitrous cars, what’s it gonna take for a boosted combo to get it done? Who gonna come take this money? Was a beautiful day testing yesterday, Mike Franks and crew been working on the surface and the improvements are awesome! Remember for the KO28 class this year and parity reasons slicks only. Index classes you can run radials but no street tires ( hard radials ) mike says. Can’t wait to see everyone in a few days for a family fun night of racing! PFA 😂
I guess there’s a few fords that need a strong transmission 😂😂
Two for Tuesday!
So much the same yet so different!
We have the following hoodies available:
Black XL 2
Grey XL 1
Black 3XL 1
Grey 3XL 1
Black 4XL 1
These are the Glidan 50/50 blend and are $35 or $40 shipped. If interested please PayPal [email protected]
Um if we put pinion depth where they want it we will need to re locate the u joint!
And sad thing is they got more than minimum wage to engrave this number!
Ready to go powerglide!
Turbo input, 8 clutch drum, billet hub, double ring servo, 1.76 gear set, deep pan, Kevlar band, billet trans brake $1500
Also have a new Hughes converter for street deal turbo spline around 800-900hp
$600 or package deal for both $1900
Some weeks they multiply! Lol
The Firebird had a massive planetary failure last weekend after some major abuse and about 300 passes! We had to work it in and out as we knew the KC Maxx Performance crew wanted to go racing. Very thankful that Ryan trust us to give him a quality unit, I think the upgrades will really help!
The new We Are Midwest Fast t-shirt design/collaboration between Kendall Goin & Justin Price are🔥🔥🔥!!
Currently taking pre-orders on shirts and hoodies!! Get yours today at Racer Outlet!!
T-Shirts available in S-5XL- $20.00￼
Hoodies available in S-5SL-$44.95
Buy both together and save 25% on the hoodie!
You will know it when you experience Midwest Fast!!
13lack 13itch Racing
Skinnies Skreecret Sauce Traction Compound
New Goin Performance Midwest Fast t-shirts are comin’ hot!! Stay tuned for the new official design!!
Sorry it's taking so long everyone, but if I wouldn't have had to change the damn jets in the middle of the night in New Jersey it would be done already.
We have new women’s tank tops available!!
We are doing a pre-order $25 or $30 shipped.
XS-4X available in this AWESOME new design!
Comment size and quantity below and Paypal [email protected]
Great Apparel Printing & Design
85-87 2 wheel drive 700R4 built with shift kit and upgrades with new converter. $900
While wait times are longer than expected at the moment and some parts are order only and the shipping companies slow I want to share a couple of tips to help.
1. Don’t load a trans that’s full of oil without it being properly sealed! This means your grocery sack is not the correct way to seal it! What happens is oil fills the bed of your truck , then when you park in the drive it runs out!
Someone has to clean it up! That someone is me, therefore I am not working on building other units. This obviously slows me down and gets me further behind.
2. Don’t bring your transmissions and transfer case still bolted together! Most of the time I am by myself and i don’t have a good way to move them around and this really slows me down! While I really enjoy helping everyone as much as possible please understand and help a little in return.
Starting today 6/24/20
Oil disposal.( because of the time it takes to go to a drop site ) Any trans with oil in it is $25 up charge unless we have talked and I want to see the oil that’s in it.
Fee to split t case and trans $200
Thank you all for understanding and for the business! Just trying to speed things up everywhere possible.
Two for Tuesday! Some don’t think we do manuals but that’s okay.
These TR6060 are some very nice units
When the customer wants to ditch the 4speed for a 4l80 OD but keep the best transfer case ever ( imo ) we make it happen!!
When you have a full bottle of nitrous and zero phucks! You still gonna send it!! 😂
This was Robert Broughton snake run of 2020 coming out of quarantine like a boss!!
There might have been a short nitrous ramp involved lol
A few Goin Performance cars practicing social distancing! They even got some new PB!!
Awesome day, awesome people thank you all for the support
Huge thanks to Skinnies Camp Racing
Hooken Chassis Race Cars
IRD Racing Carburetors
Mike Franks and family
Getting the liberty bell dialed in to haul ass! We thank you everyone for the business and support!
Ol' Liberty Bell has been making some real steam in testing so far; so much so that we decided to give Van's torque converter a little "tune-up" to help keep performance at peak all year long. ;)
Take a look through the pics to see us transform a high quality 'Brand X' welded torque converter into one of our Pro SSX bolt-together torque converters!! 🤩🤩
We went ahead and set Van up with one of our Pro Series 2,000+ HP billet planetary assemblies while we were at it, too! Even though we just freshened Van's Powerglide, the output shaft of the 'Brand X' planetary previously in Van's Powerglide just wasn't up to the task, and ended up bending. 😮😮
To help Van make a race in time, we commissioned Goin Performance to step in and save the day with the planetary swap in Van's Powerglide. ;)
13lack 13itch Racing
Skinnies Skreecret Sauce Traction Compound
Skinnies Camp Racing
SSR/Southern Street Racers
Phone won’t call or text! If you need me this is the only way right now
During this quarantine and chill the shop will be running as normal as possible as long as I still can get parts and not sick! The shop is off limits without an appointment, 0 exceptions!
Drop offs and pickup will be arranged and distance will be kept!
Failure to follow this will result in 0 refunds and your unit back in whatever condition I currently have it in! Not trying to be an ass but I don’t think enough people are taking this seriously and this will go on for months and I would like to get back to normal ASAP!
Thank you for your business and understanding, stay healthy!
God Bless America!
William Custer you have a package!
Keep on keeping on!
Thank you everyone for the business!
Remember to check us out! We offer some of the best quality, pricing and availability!
We've assembled one heck of a marketing partner team throughout the Midwest for No Prep, Small Tire, & Heads Up drag racing in 2020!!! If you're interested in adding Hughes Performance products to your operation, you owe it to yourself to be dealing with one of these fine members of :
~ Minnesota: Garage Built Racing
~ Iowa: New Edge Automotive & Detailing
~ Nebraska: The Shop Inc.
~ Missouri: Goin Performance
~ Ohio: Vickers Performance Transmissions
~ Oklahoma: Baron Racing
~ Texas: Botello Performance
Not very often you get tips in this line of work but wow!
Rich Frost thanks for the tip! But most of all thank you for the business.
Another week gone! Thank you everyone for the business.
Whoa....... talk about a wide range! 😂😂🤦🏼♂️
Fairly confident this is incorrect lol
Very sad news today. We lost one of the original hot rod guys and one of the best!
He was so innovative back in the day when it came to making horsepower especially in stock style classes! I always enjoyed conversations with him every chance I got! The stories was so special, I loved them all!
Don Mann was one of a kind and will be deeply missed by many. God speed my friend
Please keep the rest of his family in your prayers. 😢
Don’t forget we are a Skinnies Skreecret Sauce Traction Compound distributor!
If your transmission is done and you pick up before 8:30pm Friday you get 2 free pints of sauce!
This band has over a full season, a few burn downs, lost of hard passes, 1 track record and a mph record for a series! Car makes real good power and not a expensive servo!
Just for the ones that hate!
106 N Sinclair Rd
Be the first to know and let us send you an email when Goin Performance posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.
Send a message to Goin Performance:
Cable Dahmer Buick GMC Independence3107 S Noland Rd