Prospeed Autosports

Prospeed Autosports In house fabrication, Products, Service department, and Dyno tuning Prospeed Autosports is a team of experienced innovative individuals who are always striving to find ways to improve the automotive performance experience.

Each member of our team not only specializes in one or more areas of performacing engineering, but many of our skills cross over into other areas allowing us to be an efficient and productive team.

Operating as usual

Thank you Jawad for choosing Prospeed for your Lexus performance needs! Jawa brought us his stock LX570 for our stage 1 ...
12/21/2021

Thank you Jawad for choosing Prospeed for your Lexus performance needs! Jawa brought us his stock LX570 for our stage 1 supercharger package with a Harrop Supercharger. Shortly after he decided he wanted to add a little more power and have it converted to our Stage 2 package. This package raised the power to 513 whp and 563tq on 93 octane and laid down an impressive 13.05 1/4 mile time on the Dragy!

Stage 2:
- Harrop Supercharger
- Upper pulley upgrade
- American Racing long tube headers/midpipe w/ cats
- Prospeed stage 2 full fuel system with billet rails
- Prospeed dyno tune with Hptuners

Looking to add some power to your Lexus or Toyota Truck/SUV, reach out to us today!

[email protected]
832-230-1094
www.prospeedautosports.com

#PROSPEED #3UR #LEXUS #LX570 #TOYOTA #TUNDRA @harropperformance @american_racing_headers @hptuners

*THIS VEHICLE IS INTENDED FOR OFF HIGHWAY/CLOSED COURSE USE ONLY, NOT LEGAL FOR USE ON PUBLIC ROADS*

Fresh out of our CNC department with a newer design!PROSPEED DBW throttle pedal bracket for MK3/MK4 Toyota Supra. Precis...
12/16/2021

Fresh out of our CNC department with a newer design!

PROSPEED DBW throttle pedal bracket for MK3/MK4 Toyota Supra. Precision CNC machined billet aluminum construction. Adapts a GM DBW (drive by wire) throttle pedal to the Toyota Supra for use with a DBW throttle body.

Mounts in the factory location for a clean OEM appearance **be sure to add our throttle pedal and Throttle body connector kits**

https://www.prospeedautosports.com/collections/toyota-supra-1993-1998/products/d3pe-pedalbrkt

#PROSPEED #SUPRA #TOYOTA #2JZ #DBW #MOTEC #AEM #HALTECH #ECUMASTER #PROEFI

Fresh out of our CNC department with a newer design!

PROSPEED DBW throttle pedal bracket for MK3/MK4 Toyota Supra. Precision CNC machined billet aluminum construction. Adapts a GM DBW (drive by wire) throttle pedal to the Toyota Supra for use with a DBW throttle body.

Mounts in the factory location for a clean OEM appearance **be sure to add our throttle pedal and Throttle body connector kits**

https://www.prospeedautosports.com/collections/toyota-supra-1993-1998/products/d3pe-pedalbrkt

#PROSPEED #SUPRA #TOYOTA #2JZ #DBW #MOTEC #AEM #HALTECH #ECUMASTER #PROEFI

Jose and Angela's Prospeed Turbo Tundra, E85 dyno numbers coming next week. 😀Mods:- Prospeed single turbo system with ai...
12/11/2021

Jose and Angela's Prospeed Turbo Tundra, E85 dyno numbers coming next week. 😀

Mods:
- Prospeed single turbo system with air to water integrated intake manifold, 5 gallon A2W tank/billet lid, EMP pump, integrated catch can
- Prospeed surge triple pump PTFE E85 fuel system with billet rails
- Prospeed forged shortblock package
- Prospeed Motec plug and play engine management system with flex fuel sensor
- IPT built transmission
- Powertrax differential
- Caltrax traction bars
- Koyo radiator
- has true traction control, fuel pressure and overboost safetys, multiple map select on the fly, rolling anti-lag and launch control

#PROSPEED

*THIS VEHICLE IS INTENDED FOR OFF HIGHWAY/CLOSED COURSE USE ONLY, NOT LEGAL FOR USE ON PUBLIC ROADS*

Jose and Angela's Prospeed Turbo Tundra, E85 dyno numbers coming next week. 😀

Mods:
- Prospeed single turbo system with air to water integrated intake manifold, 5 gallon A2W tank/billet lid, EMP pump, integrated catch can
- Prospeed surge triple pump PTFE E85 fuel system with billet rails
- Prospeed forged shortblock package
- Prospeed Motec plug and play engine management system with flex fuel sensor
- IPT built transmission
- Powertrax differential
- Caltrax traction bars
- Koyo radiator
- has true traction control, fuel pressure and overboost safetys, multiple map select on the fly, rolling anti-lag and launch control

#PROSPEED

*THIS VEHICLE IS INTENDED FOR OFF HIGHWAY/CLOSED COURSE USE ONLY, NOT LEGAL FOR USE ON PUBLIC ROADS*

12/09/2021

Thank you Bryan for choosing Prospeed for your Tundra performance build. Bryan already had a Whipple supercharger installed but took on some engine damage, so he decided to ship us the truck and have it built to our Supercharged Max package.

Package includes:
- Prospeed built shortblock
- Prospeed billet 7" lower pulley
- Prospeed dual pump PTFE E85 fuel system w/ 1000cc injectors
- Prospeed plug and play Motec engine management system w/E85 sensor
- Prospeed race intake system
- ARH headers and midpipe
- Prospeed RCF throttle body kit
- Upgraded transmission valve body
- Harrop or Whipple Supercharger
- Penngrade racing oil
- NGK Irdium spark plugs

This package makes 650-700whp reliably on pump E85 with the ability to pump in any mixture of ethanol to 93 octane, has traction control, fuel pressure safetys, and launch control/ rolling launch or Anti-lag and can be further upgraded to our Max+ package.

Feel free to reach out if you are interested in a supercharged or turbocharged Tundra performance package or the parts needed to DIY.

832-230-1094
[email protected]

https://www.prospeedautosports.com/collections/toyota-tundra

#PROSPEED #TUNDRA #3UR #TOYOTA #SCMAX @motecusa @american_racing_headers

*THIS VEHICLE IS INTENDED FOR OFF HIGHWAY/CLOSED COURSE USE ONLY, NOT LEGAL FOR USE ON PUBLIC ROADS*

Our fabrication department stays very busy keeping our production parts flowing but we still do a ton of custom fabricat...
11/29/2021

Our fabrication department stays very busy keeping our production parts flowing but we still do a ton of custom fabrication for clients when needed. Our good client had received a new built engine and tune for his GTO, once on the dyno we realized his production exhaust just wasn't up to the task and was leaving power on the table.

Since there isint many great options, we opted to build him a custom stainless tig welded 3.00" header back exhaust system which should take care of all that.

Looking to have something custom fabricated or interested in one of our many performance packages, feel free to reach out to us via phone, email, or our contact form on our site!

832-230-1094
[email protected]

https://www.prospeedautosports.com/pages/services

#PROSPEED #FABRICATION #TIG #WELD #GM #GTO #PONTIAC #LS #LSX

*THIS VEHICLE IS INTENDED FOR OFF HIGHWAY/CLOSED COURSE USE ONLY, NOT LEGAL FOR USE ON PUBLIC ROADS*

The Prospeed High Capacity Heat Exchanger for the 6th Gen Camaro ZL1/ Gen 3 CTSV has a large High flow and High Fin Dens...
11/27/2021

The Prospeed High Capacity Heat Exchanger for the 6th Gen Camaro ZL1/ Gen 3 CTSV has a large High flow and High Fin Density Core which helps increase frontal cooling area over the factory heat exchanger keeping those intake air temps in check. This is a direct bolt in upgrade and requires no modifications to the car. These are the leading HX upgrade and is the go to for most shops and enthusiasts, order yours today at the links below:

https://www.prospeedautosports.com/collections/zl1-2017/products/pro-13-07-1001

https://www.prospeedautosports.com/collections/gen-3-ctsv-2016-present/products/gen-3-ctsv-high-capacity-heat-exchanger

#PROSPEED #CAMARO #ZL1 #CADILLAC #CTSV #LT4 #SUPECHARGED

*THIS VEHICLE IS INTENDED FOR OFF HIGHWAY/CLOSED COURSE USE ONLY, NOT LEGAL FOR USE ON PUBLIC ROADS*

I know we are extremely bias on this since we built it, but man this is one of the best looking Vipers out there. We wer...
11/18/2021

I know we are extremely bias on this since we built it, but man this is one of the best looking Vipers out there. We were excited to see @rohan_fast back out in his Prospeed Viper Barney aka The Purple Devil, after getting some much needed cage updates and engine refresh by our partners Drummond Racecars. He brought it out to @importvsdomestic to do some shake down passes and have some fun. We look forward to more testing and then making an appearance at TX2K!

#PROSPEED #DODGE #VIPER #V10 #TWINTURBO @drummond_race_cars @precisionturbo @tialsport @motecusa @driveshaftshop #LDCustoms

*THIS VEHICLE IS INTENDED FOR OFF HIGHWAY/CLOSED COURSE USE ONLY, NOT LEGAL FOR USE ON PUBLIC ROADS*

I know we are extremely bias on this since we built it, but man this is one of the best looking Vipers out there. We were excited to see @rohan_fast back out in his Prospeed Viper Barney aka The Purple Devil, after getting some much needed cage updates and engine refresh by our partners Drummond Racecars. He brought it out to @importvsdomestic to do some shake down passes and have some fun. We look forward to more testing and then making an appearance at TX2K!

#PROSPEED #DODGE #VIPER #V10 #TWINTURBO @drummond_race_cars @precisionturbo @tialsport @motecusa @driveshaftshop #LDCustoms

*THIS VEHICLE IS INTENDED FOR OFF HIGHWAY/CLOSED COURSE USE ONLY, NOT LEGAL FOR USE ON PUBLIC ROADS*

Jims Prospeed Twin Turbo C7 Corvette is looking mighty fine waiting to make its first qualifying pass at World Cup. Jim ...
11/05/2021

Jims Prospeed Twin Turbo C7 Corvette is looking mighty fine waiting to make its first qualifying pass at World Cup. Jim already went high 7s in full street trim, now after being converted to race trim, he's looking to dive deep in them while still being powered by the LT engine that came in it!

#PROSPEED #CORVETTE #C7 #LT #NoLSX #TURBO @jdezao5267 @latemodelengines @noonanraceengineering @motecusa @xonarotor @driveshaftshop @penske_racing_shocks @weldwheels @mickeythompsontires

*THIS VEHICLE IS INTENDED FOR OFF HIGHWAY/CLOSED COURSE USE ONLY, NOT LEGAL FOR USE ON PUBLIC ROADS*

One of the many Prospeed Tundra engine package builds we have going on here. Just fired her up for the first startup run...
11/01/2021

One of the many Prospeed Tundra engine package builds we have going on here. Just fired her up for the first startup running on our MoTeC plug and play setup soon to be released!

Call, email, or message us today for any of your performance autosports needs or any questions you may have!

#Prospeed

*THIS VEHICLE IS INTENDED FOR OFF HIGHWAY/CLOSED COURSE USE ONLY, NOT LEGAL FOR USE ON PUBLIC ROADS*

Yet another Tundra from out of state in for some tuning! We are the go to for any of your 3UR-FE needs!Contact us today ...
10/18/2021

Yet another Tundra from out of state in for some tuning! We are the go to for any of your 3UR-FE needs!

Contact us today to get scheduled in for anything you may need.

#Prospeed

*THIS VEHICLE IS INTENDED FOR OFF HIGHWAY/CLOSED COURSE USE ONLY, NOT LEGAL FOR USE ON PUBLIC ROADS*

Yet another Tundra from out of state in for some tuning! We are the go to for any of your 3UR-FE needs!

Contact us today to get scheduled in for anything you may need.

#Prospeed

*THIS VEHICLE IS INTENDED FOR OFF HIGHWAY/CLOSED COURSE USE ONLY, NOT LEGAL FOR USE ON PUBLIC ROADS*

We have a customer take off Magnuson SC for sale! Nothing wrong with the kit, and comes with a Griptec 2.30" pulley inst...
10/11/2021

We have a customer take off Magnuson SC for sale! Nothing wrong with the kit, and comes with a Griptec 2.30" pulley installed! $4200 for the kit, only accepting cash or wire transfer for payment.

Please share this post with all of your Tundra friends on the fence!

Also have factory cats available if anyone has had theirs stolen.

It's a motor Monday at Prospeed. After many delays on our custom pistons due to supply chain issues, the parts all arriv...
10/11/2021

It's a motor Monday at Prospeed. After many delays on our custom pistons due to supply chain issues, the parts all arrived and were turned over to our exclusive engine partner, Arrow Machine, who performed the needed machining, balancing, blue printing, and final shortblock assemble. Now we are assembling the long blocks at our facility then will begin dropping them in. Keep an eye out as we have over 6 engines being built for unique in house builds, all of which will be raising the bar from the norm you see for this platform.

If you would like any info on our engine program or are interested in a build, feel free to contact our team today!

832-230-1094
[email protected]

#PROSPEED #TOYOTA #TUNDRA #3UR

Through all our years building LT4 powered performance vehicles, we have always had a difficult time filling the superch...
10/07/2021

Through all our years building LT4 powered performance vehicles, we have always had a difficult time filling the supercharger heat exchanger system efficiently as well as we have had customers come in for power tuning that had air pockets in the system causing cooling issues under power. We decided to design and manufacture a tool that would make servicing these systems a breeze and offer more than just filling.

Introducing the Prospeed LT4 HX Fill Adapter, this tool allows adaption to the factory fill point to the standard engine coolant tank thread to allow either a vacuum fill kit to be utilized for vacuum testing and filling, a coolant system pressure test kit to quickly find leaks, or a coolant fill bucket kit to top off or allow bleeding.

These are available separately as the C7 Corvette version or the Camaro ZL1/ CTSV version or together as the shop pack (both). These are a must have for any performance shop or anyone working on these vehicles.

These are designed and machined in house at our Houston Texas facility with locally USA sourced 6061 aluminum.

https://www.prospeedautosports.com/collections/zl1-2017/products/prospeed-lt4-hx-fill-adapter

#PROSPEED #CORVETTE #Z06 #CAMARO #ZL1 #CADILLAC #CTSV #LT4 #HX #COOLING

All cleaned up and ready for delivery on this beautiful Thursday. Call or email us today for anything from basic mainten...
10/07/2021

All cleaned up and ready for delivery on this beautiful Thursday.

Call or email us today for anything from basic maintenance, bolt ons, full builds or tuning we cover it all!

All cleaned up and ready for delivery on this beautiful Thursday.

Call or email us today for anything from basic maintenance, bolt ons, full builds or tuning we cover it all!

Wrapping up yet another Tundra SC install, getting the HX coolant bled on this customer supplied TRD/Magnuson Supercharg...
10/06/2021

Wrapping up yet another Tundra SC install, getting the HX coolant bled on this customer supplied TRD/Magnuson Superchargers kit

We are your go to for Tundra performance and even maintenance if needed. Contact us today to talk about options!

*THIS VEHICLE IS INTENDED FOR OFF HIGHWAY/CLOSED COURSE USE ONLY, NOT LEGAL FOR USE ON PUBLIC ROADS*

Wrapping up yet another Tundra SC install, getting the HX coolant bled on this customer supplied TRD/Magnuson Superchargers kit

We are your go to for Tundra performance and even maintenance if needed. Contact us today to talk about options!

*THIS VEHICLE IS INTENDED FOR OFF HIGHWAY/CLOSED COURSE USE ONLY, NOT LEGAL FOR USE ON PUBLIC ROADS*

2 more happy Tundra customers going from naturally aspirated to forced induction with some of the best products on the m...
10/05/2021

2 more happy Tundra customers going from naturally aspirated to forced induction with some of the best products on the market for this platform!

These two feature a Harrop Engineering and a Whipple Superchargers SC, our full Prospeed fuel system, our race intake, finalized with dyno tuning on HPtuners software.

To take your Tundra to the next level get ahold of us today! TRX killer options also available 😈

*THIS VEHICLE IS INTENDED FOR OFF HIGHWAY/CLOSED COURSE USE ONLY, NOT LEGAL FOR USE ON PUBLIC ROADS*

A special delivery today from our friends over at MoTeC to brighten up the rainy day. We offer any components, in house,...
10/01/2021

A special delivery today from our friends over at MoTeC to brighten up the rainy day.

We offer any components, in house, or remote tuning with them. Contact us today for any of your MoTeC needs!

This gorgeous C10 is in for tuning on its Holley EFI for the newly aquired Xona Rotor turbo's purchased through us. We a...
09/29/2021

This gorgeous C10 is in for tuning on its Holley EFI for the newly aquired Xona Rotor turbo's purchased through us.

We are a dealer for practically all major brands of forced induction along with many other products across the autosports world!

If you are looking for dyno tuning, parts, or are interested in a build please contact us today!

*THIS VEHICLE IS INTENDED FOR OFF HIGHWAY/CLOSED COURSE USE ONLY, NOT LEGAL FOR USE ON PUBLIC ROADS*

09/28/2021

Thank you Marc for choosing Prospeed/BRC for your performance package for your 2021 Camaro ZL1 1LE.

Marc already had a BRC stage 1 package consisting of a RotoFab intake, exhaust system, and DSX flex fuel sensor but wanted to add some more power for road racing. After a consultation, he chose to upgrade to a Prospeed/BRC stage 3 partner package which would add a BRC spec camshaft system, DSX Aux Pump kit, and a Prospeed heat exchanger to keep everything cool along with installation at our state of the art facility. After receiving a BRC calibration by Ryne Cunningham with HPtuners, it makes 717/768 on E71 fuel on the Mustang dyno.

Looking to add some power to your late model LS/LT powered vehicle, call or email today on our Prospeed/BRC partner power packages!

832-230-1094
[email protected]

#PROSPEED @brc_raceworks @dsx.tuning @american_racing_headers @rotofab @penngrade @cammotioncams #CHEVY #CAMARO #ZL1 #1LE #LT4

*THIS VEHICLE IS INTENDED FOR OFF HIGHWAY/CLOSED COURSE USE ONLY, NOT LEGAL FOR USE ON PUBLIC ROADS*

ProSpeed’s RT-IAT system is a sensor/amplifier combo designed to give you the fastest air temp data possible. After usin...
09/15/2021

ProSpeed’s RT-IAT system is a sensor/amplifier combo designed to give you the fastest air temp data possible. After using many different solutions over the years and none of them really giving us the accurate information we needed to see, and wanted to have, we decided to venture down a path of discovery that led us to creating what we feel is the quickest responding air temp system readily available to the public. Our system is a combination of custom made thermal probes in 2 different configurations and an amplifier that’s been tailored to match the characteristics of the sensors in order to provide and stable noise free signal to whatever logging device or ECU you are using.

Our sensor system is drastically faster than the standard GM thermistor, the popular glass-bead sensor, and even your standard K Type thermocouple used for EGT. The inherent lag in these other sensors prevent the end user from seeing true temp data as it’s happening in real time. Our sensor system almost instantaneously responds to even the slightest increases in temp, which provides you with the best inlet temp data possible both for general logging and for feeding into an ECU for accurate repeatable air temp correction.
There are 2 probe configurations, one is for short term use when you need the absolute fastest data (~20-30ms response time). This probe is more fragile and must be installed with care not to damage the temp element as it is completely exposed. We consider these short term and consumables as due to the delicacy of the probe itself, it will often fail in extremely high airflow environments in a short time. Use in lower airflow situations these probes have shown to last quite a long time.

The 2nd probe configuration is more robust with a small penalty in response time (~100-150ms). These will hold up in high airflow situations without issue.

https://www.prospeedautosports.com/collections/temperature/products/prospeed-realtime-iat-sensor-system

[email protected]
832-230-1094

#PROSPEED #MOTORSPORTELECTRONICS #SENSOR #MOTEC #HALTECH #FUELTECH #EMTRON #SYVECS #AEM #PROEFI

ProSpeed’s RT-IAT system is a sensor/amplifier combo designed to give you the fastest air temp data possible. After using many different solutions over the years and none of them really giving us the accurate information we needed to see, and wanted to have, we decided to venture down a path of discovery that led us to creating what we feel is the quickest responding air temp system readily available to the public. Our system is a combination of custom made thermal probes in 2 different configurations and an amplifier that’s been tailored to match the characteristics of the sensors in order to provide and stable noise free signal to whatever logging device or ECU you are using.

Our sensor system is drastically faster than the standard GM thermistor, the popular glass-bead sensor, and even your standard K Type thermocouple used for EGT. The inherent lag in these other sensors prevent the end user from seeing true temp data as it’s happening in real time. Our sensor system almost instantaneously responds to even the slightest increases in temp, which provides you with the best inlet temp data possible both for general logging and for feeding into an ECU for accurate repeatable air temp correction.
There are 2 probe configurations, one is for short term use when you need the absolute fastest data (~20-30ms response time). This probe is more fragile and must be installed with care not to damage the temp element as it is completely exposed. We consider these short term and consumables as due to the delicacy of the probe itself, it will often fail in extremely high airflow environments in a short time. Use in lower airflow situations these probes have shown to last quite a long time.

The 2nd probe configuration is more robust with a small penalty in response time (~100-150ms). These will hold up in high airflow situations without issue.

https://www.prospeedautosports.com/collections/temperature/products/prospeed-realtime-iat-sensor-system

[email protected]
832-230-1094

#PROSPEED #MOTORSPORTELECTRONICS #SENSOR #MOTEC #HALTECH #FUELTECH #EMTRON #SYVECS #AEM #PROEFI

Address

12703 Cutten Rd. Suite A
Houston, TX
77066

Opening Hours

Monday 8am - 6pm
Tuesday 8am - 5pm
Wednesday 8am - 6pm
Thursday 8am - 6pm
Friday 8am - 6pm

Telephone

(832) 230-1094

Products

Prospeed Products, Dyno Tuning, Fabrication, Motorsports Wiring

Alerts

Be the first to know and let us send you an email when Prospeed Autosports posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Prospeed Autosports:

Videos

Nearby autos & automotive services


Other Automotive Parts & Accessories in Houston

Show All

Comments

Thank you Jawad for choosing Prospeed for your Lexus performance needs! Jawa brought us his stock LX570 for our stage 1 supercharger package with a Harrop Supercharger. Shortly after he decided he wanted to add a little more power and have it converted to our Stage 2 package. This package raised the power to 513 whp and 563tq on 93 octane and laid down an impressive 13.05 1/4 mile time on the Dragy! Stage 2: - Harrop Supercharger - Upper pulley upgrade - American Racing long tube headers/midpipe w/ cats - Prospeed stage 2 full fuel system with billet rails - Prospeed dyno tune with Hptuners Looking to add some power to your Lexus or Toyota Truck/SUV, reach out to us today! [email protected] 832-230-1094 www.prospeedautosports.com #PROSPEED #3UR #LEXUS #LX570 #TOYOTA #TUNDRA @harropperformance @american_racing_headers @hptuners *THIS VEHICLE IS INTENDED FOR OFF HIGHWAY/CLOSED COURSE USE ONLY, NOT LEGAL FOR USE ON PUBLIC ROADS*
Fresh out of our CNC department with a newer design! PROSPEED DBW throttle pedal bracket for MK3/MK4 Toyota Supra. Precision CNC machined billet aluminum construction. Adapts a GM DBW (drive by wire) throttle pedal to the Toyota Supra for use with a DBW throttle body. Mounts in the factory location for a clean OEM appearance **be sure to add our throttle pedal and Throttle body connector kits** https://www.prospeedautosports.com/collections/toyota-supra-1993-1998/products/d3pe-pedalbrkt #PROSPEED #SUPRA #TOYOTA #2JZ #DBW #MOTEC #AEM #HALTECH #ECUMASTER #PROEFI
Jose and Angela's Prospeed Turbo Tundra, E85 dyno numbers coming next week. 😀 Mods: - Prospeed single turbo system with air to water integrated intake manifold, 5 gallon A2W tank/billet lid, EMP pump, integrated catch can - Prospeed surge triple pump PTFE E85 fuel system with billet rails - Prospeed forged shortblock package - Prospeed Motec plug and play engine management system with flex fuel sensor - IPT built transmission - Powertrax differential - Caltrax traction bars - Koyo radiator - has true traction control, fuel pressure and overboost safetys, multiple map select on the fly, rolling anti-lag and launch control #PROSPEED *THIS VEHICLE IS INTENDED FOR OFF HIGHWAY/CLOSED COURSE USE ONLY, NOT LEGAL FOR USE ON PUBLIC ROADS*
Thank you Bryan for choosing Prospeed for your Tundra performance build. Bryan already had a Whipple supercharger installed but took on some engine damage, so he decided to ship us the truck and have it built to our Supercharged Max package. Package includes: - Prospeed built shortblock - Prospeed billet 7" lower pulley - Prospeed dual pump PTFE E85 fuel system w/ 1000cc injectors - Prospeed plug and play Motec engine management system w/E85 sensor - Prospeed race intake system - ARH headers and midpipe - Prospeed RCF throttle body kit - Upgraded transmission valve body - Harrop or Whipple Supercharger - Penngrade racing oil - NGK Irdium spark plugs This package makes 650-700whp reliably on pump E85 with the ability to pump in any mixture of ethanol to 93 octane, has traction control, fuel pressure safetys, and launch control/ rolling launch or Anti-lag and can be further upgraded to our Max+ package. Feel free to reach out if you are interested in a supercharged or turbocharged Tundra performance package or the parts needed to DIY. 832-230-1094 [email protected] https://www.prospeedautosports.com/collections/toyota-tundra #PROSPEED #TUNDRA #3UR #TOYOTA #SCMAX @motecusa @american_racing_headers *THIS VEHICLE IS INTENDED FOR OFF HIGHWAY/CLOSED COURSE USE ONLY, NOT LEGAL FOR USE ON PUBLIC ROADS*
Our fabrication department stays very busy keeping our production parts flowing but we still do a ton of custom fabrication for clients when needed. Our good client had received a new built engine and tune for his GTO, once on the dyno we realized his production exhaust just wasn't up to the task and was leaving power on the table. Since there isint many great options, we opted to build him a custom stainless tig welded 3.00" header back exhaust system which should take care of all that. Looking to have something custom fabricated or interested in one of our many performance packages, feel free to reach out to us via phone, email, or our contact form on our site! 832-230-1094 [email protected] https://www.prospeedautosports.com/pages/services #PROSPEED #FABRICATION #TIG #WELD #GM #GTO #PONTIAC #LS #LSX *THIS VEHICLE IS INTENDED FOR OFF HIGHWAY/CLOSED COURSE USE ONLY, NOT LEGAL FOR USE ON PUBLIC ROADS*
The Prospeed High Capacity Heat Exchanger for the 6th Gen Camaro ZL1/ Gen 3 CTSV has a large High flow and High Fin Density Core which helps increase frontal cooling area over the factory heat exchanger keeping those intake air temps in check. This is a direct bolt in upgrade and requires no modifications to the car. These are the leading HX upgrade and is the go to for most shops and enthusiasts, order yours today at the links below: https://www.prospeedautosports.com/collections/zl1-2017/products/pro-13-07-1001 https://www.prospeedautosports.com/collections/gen-3-ctsv-2016-present/products/gen-3-ctsv-high-capacity-heat-exchanger #PROSPEED #CAMARO #ZL1 #CADILLAC #CTSV #LT4 #SUPECHARGED *THIS VEHICLE IS INTENDED FOR OFF HIGHWAY/CLOSED COURSE USE ONLY, NOT LEGAL FOR USE ON PUBLIC ROADS*
I know we are extremely bias on this since we built it, but man this is one of the best looking Vipers out there. We were excited to see @rohan_fast back out in his Prospeed Viper Barney aka The Purple Devil, after getting some much needed cage updates and engine refresh by our partners Drummond Racecars. He brought it out to @importvsdomestic to do some shake down passes and have some fun. We look forward to more testing and then making an appearance at TX2K! #PROSPEED #DODGE #VIPER #V10 #TWINTURBO @drummond_race_cars @precisionturbo @tialsport @motecusa @driveshaftshop #LDCustoms *THIS VEHICLE IS INTENDED FOR OFF HIGHWAY/CLOSED COURSE USE ONLY, NOT LEGAL FOR USE ON PUBLIC ROADS*
Jims Prospeed Twin Turbo C7 Corvette is looking mighty fine waiting to make its first qualifying pass at World Cup. Jim already went high 7s in full street trim, now after being converted to race trim, he's looking to dive deep in them while still being powered by the LT engine that came in it! #PROSPEED #CORVETTE #C7 #LT #NoLSX #TURBO @jdezao5267 @latemodelengines @noonanraceengineering @motecusa @xonarotor @driveshaftshop @penske_racing_shocks @weldwheels @mickeythompsontires *THIS VEHICLE IS INTENDED FOR OFF HIGHWAY/CLOSED COURSE USE ONLY, NOT LEGAL FOR USE ON PUBLIC ROADS*
One of the many Prospeed Tundra engine package builds we have going on here. Just fired her up for the first startup running on our MoTeC plug and play setup soon to be released! Call, email, or message us today for any of your performance autosports needs or any questions you may have! #Prospeed *THIS VEHICLE IS INTENDED FOR OFF HIGHWAY/CLOSED COURSE USE ONLY, NOT LEGAL FOR USE ON PUBLIC ROADS*
Yet another Tundra from out of state in for some tuning! We are the go to for any of your 3UR-FE needs! Contact us today to get scheduled in for anything you may need. #Prospeed *THIS VEHICLE IS INTENDED FOR OFF HIGHWAY/CLOSED COURSE USE ONLY, NOT LEGAL FOR USE ON PUBLIC ROADS*
We have a customer take off Magnuson SC for sale! Nothing wrong with the kit, and comes with a Griptec 2.30" pulley installed! $4200 for the kit, only accepting cash or wire transfer for payment. Please share this post with all of your Tundra friends on the fence! Also have factory cats available if anyone has had theirs stolen.
It's a motor Monday at Prospeed. After many delays on our custom pistons due to supply chain issues, the parts all arrived and were turned over to our exclusive engine partner, Arrow Machine, who performed the needed machining, balancing, blue printing, and final shortblock assemble. Now we are assembling the long blocks at our facility then will begin dropping them in. Keep an eye out as we have over 6 engines being built for unique in house builds, all of which will be raising the bar from the norm you see for this platform. If you would like any info on our engine program or are interested in a build, feel free to contact our team today! 832-230-1094 [email protected] #PROSPEED #TOYOTA #TUNDRA #3UR