Heritage Beetle Parts

Directions

Heritage Beetle Parts Selling genuine & aftermarket VW Beetle parts. All parts tested before shipping. Video call check available. Bulk buyers welcome. Serious buyers only.

Located in Houston Texas, ship nationwide. Message for instant catalog
No returns on electrical items.

Hey there everyone! Just wanted to introduce myself and share a photo that I took
09/04/2026

Hey there everyone! Just wanted to introduce myself and share a photo that I took

Sometimes you just need to slow down and enjoy the ride in a Beetle 🐸 🚗
09/04/2026

Sometimes you just need to slow down and enjoy the ride in a Beetle 🐸 🚗



First batch went on our cars for testing Now doing a full batch Bolt on fuel mounts with filter options in an6/8 and bul...
09/04/2026

First batch went on our cars for testing
Now doing a full batch

Bolt on fuel mounts with filter options in an6/8 and bulkhead fitting for return in 6/8 aswell

This filter is a billet core (red blue silver) with options on inner mesh strainers for either fuel or spicy fuel

Or a drop in Bosch fuel filter on an6/8 options

Allows a break point for bay pipe work to not be part of the underside pipe work

Easy filter location and easy change

Allows cut out for a brake pipe mount (surplied)

Satin black powder coat will be the standard option
With stainless fixings

Working out a price on options

Mount and filter/fixings

Then same but with the needed an fittings ect

08/29/2026

**Huddleston Performance Introduces Reaper Cast CNC Shredder Cylinder Head, Big Power at Affordable Prices, $450 CNC Ported Head**

Huddleston Performance has been changing the game in the Clone world for awhile now. From our 277cc Kits to our Reaper Billet Cylinder Head, the Clone continues to make big improvements within our building. The newest piece coming to our line up is the new HP Reaper Cast CNC Shredder Cylinder Head, aimed at providing you big horsepower without the big budget.

This new HP Reaper Cast CNC Head starts off with a Shredder base head, giving a good platform to create a cost effective powerful Cylinder Head. We then install a 32mm Intake Valve, New Seat, and Full CNC Port to create a head that flows over 108CFM. The Exhaust side is a 25mm Exhaust Valve, but is also CNC ported to allow for better flow all the way around. You'll see that not every surface is touched throughout the port, that is because the Shredder base is already good sizing in those areas, and we don't want to lose flow just to wipe a surface. A 14cc Chamber gives the HP Reaper Cast CNC Shredder the ability to run a lot or a little compression, based on your preference.

The HP Reaper Cast CNC is a complete Cylinder Head ready to install. It comes together with: HP Reaper Cylinder Head, 32mm 5.5mm Stainless Intake Valve, 25mm 5.5mm Stainless Exhaust Valves, Comp 960 Springs, Titanium Retainers, Locks, Spigot Style Intake Manifold.

This combination is intended to perform well on 212cc, 236cc, and 247cc combinations. However, it is very functional and performs well on our 277cc combinations if you're looking for a cost effective head or run in a cast type head class. We pair these with the Gage Manufacturing 1.2 or 1.3 Roller Rockers, sold here on our site as well, to create a high quality well running piece. Check out the flow charts as well as compression ratio charts for your specific combo. These are in stock and ready to head your way immediately.

go directly to ordering your new Reaper Cast CNC. Also check out the video below of the new Reaper Cast CNC fired up on a 236 today.👇👇👇



**Huddleston Performance Introduces Reaper Cast CNC Shredder Cylinder Head, Big Power at Affordable Prices, $450 CNC Por...
08/29/2026

**Huddleston Performance Introduces Reaper Cast CNC Shredder Cylinder Head, Big Power at Affordable Prices, $450 CNC Ported Head**

Huddleston Performance has been changing the game in the Clone world for awhile now. From our 277cc Kits to our Reaper Billet Cylinder Head, the Clone continues to make big improvements within our building. The newest piece coming to our line up is the new HP Reaper Cast CNC Shredder Cylinder Head, aimed at providing you big horsepower without the big budget.

This new HP Reaper Cast CNC Head starts off with a Shredder base head, giving a good platform to create a cost effective powerful Cylinder Head. We then install a 32mm Intake Valve, New Seat, and Full CNC Port to create a head that flows over 108CFM. The Exhaust side is a 25mm Exhaust Valve, but is also CNC ported to allow for better flow all the way around. You'll see that not every surface is touched throughout the port, that is because the Shredder base is already good sizing in those areas, and we don't want to lose flow just to wipe a surface. A 14cc Chamber gives the HP Reaper Cast CNC Shredder the ability to run a lot or a little compression, based on your preference.

The HP Reaper Cast CNC is a complete Cylinder Head ready to install. It comes together with: HP Reaper Cylinder Head, 32mm 5.5mm Stainless Intake Valve, 25mm 5.5mm Stainless Exhaust Valves, Comp 960 Springs, Titanium Retainers, Locks, Spigot Style Intake Manifold.

This combination is intended to perform well on 212cc, 236cc, and 247cc combinations. However, it is very functional and performs well on our 277cc combinations if you're looking for a cost effective head or run in a cast type head class. We pair these with the Gage Manufacturing 1.2 or 1.3 Roller Rockers, sold here on our site as well, to create a high quality well running piece. Check out the flow charts as well as compression ratio charts for your specific combo. These are in stock and ready to head your way immediately.

go directly to ordering your new Reaper Cast CNC. Also check out the video below of the new Reaper Cast CNC fired up on a 236 today.👇👇👇



🔥 1965 VW BEETLE – CUSTOM PATINA BUILD 🔥$14,950 OBO | Medford, ORAuthentic vintage patina outside, fully custom setup in...
08/29/2026

🔥 1965 VW BEETLE – CUSTOM PATINA BUILD 🔥

$14,950 OBO | Medford, OR

Authentic vintage patina outside, fully custom setup inside. Starts instantly on the first turn of the key, runs strong, and turns heads everywhere it goes.

⚡ THE HIGHLIGHTS:

Fresh 1600cc Engine – Reliable, smooth, and plenty of power

12V Conversion & New Clutch – Easy starts and crisp shifting

New Floor Pans – 100% solid foundation

Custom Stance & Interior – Lowered, detailed engine bay, clean cabin

Turn-key ready to cruise today.

Twin Webber 40’s Carbs with CSP Linkage Description Genuine Twin 40’s in great condition. Complete with manifolds, filte...
08/29/2026

Twin Webber 40’s Carbs with CSP Linkage Description Genuine Twin 40’s in great condition. Complete with manifolds, filters, csp linkage.

Finished up a couple more TF-1 cases to ship out.
08/28/2026

Finished up a couple more TF-1 cases to ship out.

My 68 project. Found this about a month ago with 78,000 original miles. Going back to the 60’s for the Hot Wheels Hot VW...
08/28/2026

My 68 project. Found this about a month ago with 78,000 original miles. Going back to the 60’s for the Hot Wheels Hot VW look. 50 years ago, I built a 55 small window with the same look.

Probably going to be listing our 73 in the next few weeks.
08/28/2026

Probably going to be listing our 73 in the next few weeks.

Address

12130 Antoine Drive
Houston, TX
77066

Website

Alerts

Be the first to know and let us send you an email when Heritage Beetle Parts posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Sponsored

Share

Category