Larson Auto Works

Larson Auto Works Specializing in Classic Car Restoration, Modification, and Preservation. American, European, Japanese

1957 Chevy Bel Air ConvertibleReplaced the exhaust manifold gaskets, converted the distributor to Pertronix ignition.One...
04/29/2026

1957 Chevy Bel Air Convertible

Replaced the exhaust manifold gaskets, converted the distributor to Pertronix ignition.

One of the Convertible top rams was bent, replaced both sides and the hoses.

Made sure the top functioned correctly and off it goes

1971 Plymouth ‘Cuda 340Converted to Power Disc brakes up front. Installed a Phenolic spacer under the carb to help with ...
04/28/2026

1971 Plymouth ‘Cuda 340

Converted to Power Disc brakes up front. Installed a Phenolic spacer under the carb to help with v***r lock. Lastly replaced the turn signal switch in the column to get all the indicators to work.

This Cuda is ready for daily driver duty.

#340

2 brothers just dropped off this 1967 Chevy Impala 4 door. They said it’s their Baby and to take care of it. Taking care...
04/01/2026

2 brothers just dropped off this 1967 Chevy Impala 4 door.

They said it’s their Baby and to take care of it. Taking care of some metal work before it goes to paint. Doing a color change to a Gloss Black, and refresh all the chrome and trim.

Should look pretty menacing, Supernatural even, when it’s done.

1984 Jeep Grand WagoneerThe stock 360 had a complete loss of power, ended up being a few components failing around the s...
04/01/2026

1984 Jeep Grand Wagoneer

The stock 360 had a complete loss of power, ended up being a few components failing around the same time.

Replaced the electric fuel pump. This Jeep had been outfitted with a Chevy style TBI unit. Disassembled the TBI, replaced the fuel pressure regulator and cleaned the injectors.

To remedy the weak spark the stock ignition box was replaced and also upgraded to stronger ignition coil.

Quick test drive and this Wagoneer is ready to hit the trails once more

Very cool and very rare 1979 Ford Bronco Free Wheeling editionButtoning up some minor things on the truck. Mounted the r...
03/20/2026

Very cool and very rare 1979 Ford Bronco Free Wheeling edition

Buttoning up some minor things on the truck. Mounted the rear tire carrier, adding a charcoal canister, tuning the carburetor, new windshield trims, other small odds and ends

Fixed some issues with the paint and aligned the hood.

We can’t take credit for the restoration, the owner did a fantastic job doing it himself.

Fixing some odds and ends on this 1978 Ford F-150 4x4Transfer case leak at the front output, calibrated the speedometer ...
03/19/2026

Fixing some odds and ends on this 1978 Ford F-150 4x4

Transfer case leak at the front output, calibrated the speedometer for the larger wheels and tires, replaced the turn signal switch, and lastly installed a kickdown cable so the passing gear works correctly.

On to the next one

Nice 1969 Chevy Camaro came in for a starter issueChanged to the correct starter for the flywheel, got the correct mount...
03/19/2026

Nice 1969 Chevy Camaro came in for a starter issue

Changed to the correct starter for the flywheel, got the correct mounting hardware, new starter brace to the block, and shimmed it to perfection.

Now there’s no unwanted noise under the hood when that 396 cranks up.

#396

03/12/2026

Quick video of the LS swapped 1967 Chevy Camaro Convertible

1967 Chevy Camaro ConvertibleCustomer supplied us with a built LS 6.0We mated it to the existing Th400 transmission in t...
03/12/2026

1967 Chevy Camaro Convertible

Customer supplied us with a built LS 6.0

We mated it to the existing Th400 transmission in the car. New ceramic coated headers, chrome front accessory drive, all new hoses, Holley terminator engine management.

Installed a set of Dakota Digital RTX gauges to get proper readings from the new engine.

Aluminum radiator with dual electric fans finish out the install.

Quick job on this 32 FordHad no brakes at all. The brake pressure switch ended up failing and leaked all the fluid out o...
03/11/2026

Quick job on this 32 Ford

Had no brakes at all. The brake pressure switch ended up failing and leaked all the fluid out of the system.

Deleted the old switch entirely, fabricated a bracket for a new lever style switch. Replaced the master cylinder as well, fluid was pooling in the back of the brake booster.

Quick adjustment on the dual carbs before it left

Address

10903 Metronome Drive
Houston, TX
77043

Opening Hours

Monday 9am - 6pm
Tuesday 9am - 6pm
Wednesday 9am - 6pm
Thursday 9am - 6pm
Friday 9am - 6pm

Telephone

+12817488030

Website

Alerts

Be the first to know and let us send you an email when Larson Auto Works posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Featured

Share

Category