BedWood

09/25/2026

If the build is finished, the bed should look finished too.

RETROLINER® gives ’67–’72 C10 Fleetside trucks a real hardwood finish over the existing steel floor, so the bed can get the same level of attention as the paint, stance, drivetrain, and interior.

And if you’re headed to the Grand National Truck Show at Fairplex in Pomona this weekend, September 26–27, BedWood will be there in Building 4. Come check out your options in person and tell us what you’re building next.

Finish the bed like you finished the truck.

09/24/2026

The difference between a kit that looks easy and one that actually installs easy is in the prep.

Our stainless strips show up ready to go, with the cutting, punching, and polishing already handled before the box ever reaches you. Add the included stainless hardware, and you’re spending less time making parts fit and more time putting the bed together.

That’s what a complete kit should do.

Come see our strips in person at the Grand National Truck Show at Fairplex in Pomona, CA, this weekend September 26th and 27th. You'll be able to find us in Building 4.

09/23/2026

If the build is fully custom, the bed should look custom, too.

Whether your squarebody still has the factory steel bed or the build has gone fully custom with a raised floor, RETROLINER® gives you a real hardwood finish without tearing into what’s already there.

The bed gets the same level of attention as the rest of the truck, no matter how far the build has gone.

Finish the bed like you finished the truck.

09/22/2026

K5 Blazer owners, RETROLINER® isn’t just for pickups.

We build kits specifically for the K5, with different configurations depending on whether you’re running the rear seat or have it removed. That means the fit is designed around the floor layout you actually have, not something close enough.

Real hardwood, polished stainless, and a finished rear floor that looks like it belongs with the rest of the build.

09/21/2026

Keep the factory bed factory.

RETROLINER® was designed to use existing holes in the truck bed for mounting, so adding a real hardwood floor doesn’t mean reaching for the drill first.

No new holes in the sheet metal. No unnecessary modifications. Just a clean way to completely change the look of the bed while leaving the factory steel underneath alone.

09/18/2026

Classic Truck Performance took a 1964 C10 and gave the bed the same attention as the rest of the build.

For this one, they went with our BedWood Carbon Series kit, smoked stainless bed strips, and a custom center board setup designed around a hidden fuel filler. The Legens concealment kit lets that center board pivot open for easy access without breaking up the clean look of the bed floor.

The result is exactly what a custom truck bed should be: clean, functional, and built around the details that make the whole truck feel finished.

Check it out here: https://loom.ly/u10omOM

A premium wood bed can completely transform the look of a classic t...

09/17/2026

This time last week, we were checking out builds like Orange Crush at the Triple Crown of Rodding.

This ’37 Chevy pickup already has plenty of personality, but the BedWood setup takes the whole build to another level. Real hardwood, polished stainless, and a clean installation give the bed the same attention to detail as the rest of the truck.

That’s exactly what BedWood is built for—finishing the part of the build that deserves just as much attention as everything else.

09/16/2026

The Triple Crown of Rodding brought out some serious builds in Nashville this past weekend, and this squarebody sitting in the Hill’s Hot Rods display definitely got our attention.

The stance, paint, wheels, and overall finish are dialed in, but that BedWood kit really ties the whole truck together. Details like that are what take a clean build and make it feel complete.

Big thanks to Hill’s Hot Rods for putting together a killer display, and to everyone who stopped by to check out BedWood and RETROLINER® at Nashville Superspeedway.

09/15/2026

Did you know you could order a wood bed in a 1967–1972 Fleetside C10?

PowerNation took this 1972 C10 from a long bed farm truck and turned it into a short bed street machine, with a 427ci LS, ProCharger, air ride, big brakes, custom wheels, and a completely new attitude.

To finish the bed, the show chose a BedWood RETROLINER® kit, adding real hardwood over the steel floor and giving the back of the truck the same level of detail as the rest of the build.

From farm truck to street machine, this C10 got a full second life.

Check out the full build at https://loom.ly/NClKI00.

We took a worn-out 1972 Chevrolet C10 farm truck and turned it into...

09/14/2026

“The bed is beautiful. Thank you.” — Larry Hayes

Hard to argue with the finished product on Larry’s 1968 F-100.

RETROLINER® gives steel-bed trucks real hardwood without cutting up the factory floor. The system is modeled for precise fitment, installs without drilling, and floats above the steel so rain and wash water can still drain properly.

Larry, thanks for sending the photos and letting us be part of the build.