Hilliard Dryer Vent Cleaning

02/06/2014

02/06/2014

Benefits of Dryer Vent Rerouting

Provides proper airflow
Reduces the risk of fire
Increases dryer efficiency
Prevents the growth of dangerous molds and mildews

02/06/2014

Dryer vent systems must vent to the outside of the home. Unfortunately, sometimes corners are cut and vent systems improperly terminate in attics, garages, crawl spaces, wall cavities, or other undesirable locations. Improper vent placement can be a fire hazard, restrict airflow, reduce the efficiency of your dryer, and become a breeding ground for mold and mildew.

02/06/2014

Dryer Vent Wizard professional dryer vent installation ensures that vent materials are in compliance with the recommendations and requirements set forth by one or more of the following: current IRC (International Residential Code), Underwriters Laboratory, dryer manufacturers, Consumer Product Safety Commission, the National Fire Protection Association, and/or International Mechanical Code IMC.

02/06/2014

Dryer Vent Installation Materials

Don't Use Foil or Vinyl Vents
Considered a fire hazard
Ridged interior easily collects and traps lint
Difficult to clean without puncturing or tearing
If a dryer fire does occur, can quickly spread fires
Easily crushed behind the dryer, cutting off proper airflow
Can develop sags in the vent line, enabling water and lint to collect

Don't Use PVC Vents
Considered a fire hazard
Static in PVC venting causes lint to stick to the inside of the vent walls, which can mix with the expelled water during a typical dry cycle, creating sludge and an increased risk of a fire
PVC sweats when warm moist air travels through the cool smooth surface. This moist air causes lint to collect and harden and, in turn, makes cleanings more difficult
PVC takes longer to heat up, allowing water to remain in v***r form inside the pipe. The water, along with the buildup of lint, creates sludge in the vent.